uumm, any1 can help me point out wat i shud do next for rams, nb and ht?

does u read the guide at the first page?

it should able to help you to find out.

when u change the HTT (ram freq, HT link and NB speed will change).. u just need to know the name in your bios first.
read the first page, and i'm sure u will come with the new result..

This post has been edited by xixo_12: Nov 22 2009, 07:37 PM

yep, read it alr including CAL but still stuck on wat to do next.

tat's y i post the ss of my bios b4...

CAL? what's that? do you refer to ram or what? CL?

owh crap, CL = CAS Latency

Mind telling, why don't understand?

btw:


Oh

for starters, which setting shud i tweak 1st for rams?

since ur ram is 1066, i don't see any point why u want to tweak ur ram..
unless u want to push ur component to the max that the component able to run,
such as, u want to push ur ram beyond 1066..

for ddr2, best to tweak 5-5-5-15-20 and below, if wanna use cl6 , u might get higher ram speed, but likely ddr3 setting which i don't prefer...

pump vdimm, and push ur HTT like +5 .. then u ram speed will change.. either it's successful or not, based on the test..

He He He~ while waiting for new pump to arrived!

simple OC by me and i luv the NB so much! not the vcore!



This post has been edited by verdict: Nov 23 2009, 12:59 AM

verdict
i my spider sense is tinglin..
looks liek someone will ditch AMD and go for i7

btw i have to start from scratch..my NB issue not solved yet... i hate it i hate it

Who is that?
I sense it is you
Verdict,whats your CPU-NB Vid for that NB Freq?

On ACC, temp hilang???



1.35v in bios I guess ...but a whopping 1.41v measured at mobo points using DMM...

im using 1.220v for CPU-NB voltage IINM and for NB voltage itself is around 1.230! Yup ilang! pelik kan kan kan? He He He! it just a controversy!

Nothing much,mana mampu nak pakai i-seben kunta!


This post has been edited by verdict: Nov 22 2009, 11:57 PM

Wait..NB Voltage is for what?
As far as i know CPU NB Vid for NB Freq.

This is what i mean!



CPU-NB Voltage -

NB Voltage -

Do you get what i trying to say TS as im noob also with this MSI stuff!

maybe bro antonio can brief us a bit with his knowledge!

This post has been edited by verdict: Nov 23 2009, 12:41 AM

I know = =
Whats the purpose of adding NB Voltage?

IINM the CPU NB will add a bit volt to CPU it self (supporting)

And for the NB Voltage is for pure voltage to NB it self!

This is just my "Alien Theory" so far! do correct me if im wrong!

a new 2 hours primming result for low voltage at this moment!



This post has been edited by verdict: Nov 23 2009, 01:05 AM


Attached thumbnail(s)

For what pumping the NB?
Increase the NB Freq Stability?

last time unker digs ask me to increase nb volt if HTT oc/high OC involves..he said something related to bandwidth.. which bandwidh im not so sure...
but it does helps stability in my old days.. (today no mo high oc...so seldom increase nb volt)

Yes agree! thats the word! to increase stability!

Thanks kunta for the simple explanation! you learn a lot! Good Job!