Ya. TRUE w/ AMD stock bracket.

-pWs-

the temp make me feel wana to change my cooler...xD...buy money tak ada.haha

@ -pWs-
whatta..
that vcore able to make it x4 3.6..
u making me angry.

we demand for 4ghz.. (its a no go for my ta790gx 128)

Trying now. 3800Mhz currently.

-pWs-

Aiya... the vcore is actually 1.325.. become 1.04 becuz its on cool & quiet.... i think.. becuz the min processor i put 5% in power management.

ok one at a time.. with 1.325 vcore, what should I increase to try 3ghz?? ram speed?? how?

Here.. on High Performance..

This post has been edited by yvliew: Jul 29 2009, 02:15 AM


Attached thumbnail(s)

cool and quiet shud reduce ur multi as well..so reduce the core speed as well. but from the CPUZ, only the vcore is reduced..so i wonder..

now just stress with small FTT..(or might consider bumping 1 notch of vcore,lower down HT perhaps)

@-pWs-
im waiting for ur SS..can post now? hehhe..10mins of priming also consider stable for me..
im too

u mean use 1.4? lower the multi?? higher bus speed??

3ghz stability test in overdrive shows no problem. but fails in Prime95 and OCCT(within minutes)

This post has been edited by yvliew: Jul 29 2009, 02:18 AM

Not stable. Only 5 mins. Still tweaking.

-pWs-

no no..not 1.4v..pick 1.312v-1.35v..shud be ok
lower HT link.. not multi.
done prime with small FTT in PRIME?

gambatte ne.
3.6 x4 with that vcore is TOOOOOOOOOOO good edi..no need that emoticon.. u shud use this instead.

i forgot.. i think either small ftt or blend...'

how low shall I put for HT LINK?

This post has been edited by yvliew: Jul 29 2009, 02:33 AM

change the memory divider ? your ram is running at nearly 900mhz

This post has been edited by fcuk90: Jul 29 2009, 02:33 AM

memory devider? its showing 449 MHz... where got 900??

how to change memory devider?

try using small..so it will less stress ur RAM..if that pass, means ur ram is the culprit..im not saying ur ram is not stable..just seek for which one (proc or ram) is not stable 1st..

some value ram can do that with no sweat..but i wonder how the tracendence perform..

@yvliew
at CPUZ, u have to times 2.. so 449x2 is 898mhz...
using AOD in OCing?
change mem divider to 400mhz 1st..

If times 2 = 900mhz lorr....

Its DDR remember??? Double Data Rate!

Update:
3800MHz (200 x 19)

CPU Temp: 36 (Idle) 55 (Full)



SuperPI & Everest Cache and Memory Benchmark



-pWs-

just like i tot bro..
the last clock i can ever obtain with low vcore is around 3.6-3.7..around 1.30v still can prime stable.. but want to make it 3.8ghz, lot of vcore needed.. haish.. (im in x2 somemore)
but still, i wan 4.0ghz!!

4000Mhz boot windows success.
Priming now.

Guess might take more longer time to tweak.

-pWs-

x4 B50 @ 4000Mhz (aka i7 4000Mhz w/ HT off)



-pWs-

nice oc there bro .. wow the voltage still below 1.45v