How to overclock? I just got a gigabyte MA78GM US2H and Phenom II 710. I just wanna increase the speed cuz unlocking 4th core is out of the question since my mobo has SB700 only...

The last time I OC my AMD proc was AMD Athlon 64 3000+, I increase the bus speed. But for my new mobo... I'm lost.. what do I actually increase??

btw, idle temp is around 29c and load is around 37c. is it good?

True power PSU 350W is it too little for PII 710 & HD4670 ?

Can OC proc lagi??

didnt do any stress test after OC little bit to 2.8ghz.. run Resident Evil benchmark without any problems though.

hi ppl.. I have Phenom II X3 710.. the code is 0912DPAW .. good or not?

abit OT, how many Watt does a Sata harddisk takes up?? and my processor? and my graphic card.. HD4670..

i wanna calculate my PSU enough or not... thanks~

can list down each hardware roughly use how many watts??

i wanna ask about PSU. I have a 20 pin 450w PSU, can i use 20pin to 24pin converter for it to work on my 24pin motherboard?

actually my old PSU is quite good.. forgot what brand.. but its good~ those wire doesn't come out in a bunch.. its plugged in to the psu individually.. are there any risk with using 20pin to 24pin converter??

I found out what PSU is that.. Ultra X-Connect 500W .. Sure better than this... Huntkey 350watt.. anyone heard b4 this one?????? any good??

yes is the same but mine is black finish.... someone replied me this but i dun really understand... what does he mean?

"This is a pre-ATX2.x unit, which is when the specification moved the majority of the capacity to the 12V rail. The psu is probably still ok to use, but determine the actual wattage from the 12V rail rating, not the overall power rating. You don't necessarily need a bulky 20 to 24 pin adapter, the mobo will work fine without it."

http://www.ultraproducts.com/

this is their website..

Any risk or not?? so the extra 4 pin no need to plug also can?? I'm using Gigabyte MA78GM US2H.. can check??

I use AMD OverDrive autoclock, it says the last successful tune is 235. So it's save to set my clock to 235 in bios right??

mine.. use autoclock and got 235 result.. set it bios... didnt do any prime or stability test yet.... but ran Street Fighter 4 game.. didnt hang or restart....

one problem. When I open AMD OverDrive, didnt set anything, I just hit OK to close it.. it restart.. whats wrong??

is OCCT tool good for testing the stability of OC or not? just like Prime95?

My Phenom II X3 710 cannot change multiplier to higher than x13?? Only can OC by changing the bus speed??

at 3Ghz.. run OCCT, Core 2 has problem...... I increase to 235 x 13, increase cpu volt to +0.025. Any other suggestions for me?? what else i can do to try making 3ghz work? wat else do i need to increase?

This post has been edited by yvliew: Jul 28 2009, 11:04 PM

My motherboard has SB700... no ACC lar.........

Any help or suggestion pls..

Phenom II X3 710.. Couldn't stable on 3ghz..

Shall I increase vcore more? 1.4? how about NB?? 2.9ghz stable...

cpuz??




Attached thumbnail(s)

Aiya... the vcore is actually 1.325.. become 1.04 becuz its on cool & quiet.... i think.. becuz the min processor i put 5% in power management.

ok one at a time.. with 1.325 vcore, what should I increase to try 3ghz?? ram speed?? how?

Here.. on High Performance..

This post has been edited by yvliew: Jul 29 2009, 02:15 AM


Attached thumbnail(s)

u mean use 1.4? lower the multi?? higher bus speed??

3ghz stability test in overdrive shows no problem. but fails in Prime95 and OCCT(within minutes)

This post has been edited by yvliew: Jul 29 2009, 02:18 AM