Me use 4-2-1 extractor (o2 sensor at 1), trust straight flow bullet and s-flow muffler... So next mod will be brake pad, ACP and AFR/FPR...

p/s: Now in proses apply loan for house.... After that get baby maybe on february, than can start mod again....

Anyone heard of the latest 'ECU' setting for Siemen EMS7000? Someone mentioned about a callback from Proton.

Thats alignment problem, not camber.

i think ur car like beyonce very much la.. to the left.. to the left...

some said its due to our power steering bushes that are giving this small issue as well. this is just hearsay but seems logical because the veering left does come back after the alignment has been done. since day one my steering is not straight. it has always been a little to the left. i need to tilt steering to the right to keep the car straight. It seems the rubber holding the power steering rack is not fully holding the rack in place thus there is a small degree of difference. i might change the steering bush to super pro ones when I go down to australia next trip to get a set + all the anti roll bar bushes.. haha.. now cannot go australia becoz of the H1N1 is very rampant 'down under.' cheers.

yeah it should be alignment, the chamber was out so got it fixed too... but i've already realigned, i even saw the screen when the guy did the alignment... can't remember all the values, but i'm quite sure in was all green... meaning to say everything was within tolerance... still it happens...
i'm thinking about going to PESC and do check.... thus the question does PESC has the tools to perform alignment?

if you did not use high cam, dun install ACP it's kinda waste of $. Since u've rebore TB, go for P&P, AFR & LCP.

From my experience, the best place to do alignment is at RACE Glenmarie. They use tape to measure your car (ground clearance) and sets all sort pf parameters such as rims and tyre size instead of using the predefined ones. They also will turn the steering all the way right and left several time to see if the setting stays and also lift the car up and down and do the whole alignment process again.  But it is costly, RM80 (if not mistaken) and takes about 1 hour++.

U suggesting that i buy ACP together with cam? LCP already have So AFR is the target... Need the oil meter or not eh..?

Hey bro, mind to give some directions to RACE Glenmarie? I searched for the place last time, ended up getting lost..not familiar with the area some more  . Thanks in advanced!

Yup, highcam + ACP. for AFR u need to have meter else it will be very difficult to tune.

From my experience, the best place to do alignment is at RACE Glenmarie. They use tape to measure your car (ground clearance) and sets all sort pf parameters such as rims and tyre size instead of using the predefined ones. They also will turn the steering all the way right and left several time to see if the setting stays and also lift the car up and down and do the whole alignment process again.  But it is costly, RM80 (if not mistaken) and takes about 1 hour++.

That would be interesting and it would be great if they replaced the ECU/TCU with a newer and better one. I have been studying the behavior of the car (especially the TCU since mine is an auto) and i think i've managed to find a bug with the lock up. My transmission will not lock up from starting the engine unless i have cycled through all the gears and come to a complete stop after the engine has warmed up. I can consistently reproduce it from a cold start (i watch this behavior every morning when i go to work). Anyone else notice this? Gen2 cps auto.

I long time never post....just want to share some pic


taken in one utama....my car is the right one....31C mine is Silver and the other one is Irredecent white...mine a bit yellow due to near the yellow lights....


This one i took at Jusco Seremban....

Damn potong lah these police Evos. One it is ugly. 2nd most of the time I see it on display at some shopping complex and 3rd I dont see any at the highway~ all urban areas only.

nice man...hahhaa....why rarely see my car around..except for the govt officials cars..which is silver...

---

Added on July 17, 2009, 2:11 amhttp://paultan.org/archives/2009/07/16/proton-exora-turbo-based-on-the-exora-prestige/

turbo campro on exora

one more pic to share

guys ... do u check the oil dipstick after service car ? Issit too invisible ? like cannot see any oil trace at all on the dipstick .. onli can notice when i wipe with tissue ...

Just done my 2nd service today. I was at my car all the time. Didnt notice he got change oil lol .. but the guy insist change d