Just wanna know if it is connected to the net in some way, or is it just a simple notification to inform me i am back on 3G or something like that.

ohhh....okok, actually it's not telling you that you are on the net or not. it's jsut telling you that, you're using voice call now so your data will not work.

once you finish talking on the phone, you will get another notification telling you that, you can now use your data connection.

Below 3G, you can only use voice or data at any one time. so if you don't want this irritating message to pop-up, what you can do is let your phone run on a 3G network, then this notification won't appear anymore because 3G network supports using voice and data concurrently.

but then, battery life goes down the drain if you enable Dual Mode or UMTS only.

OIC. That's a great explanation, thanks.

So running it in GSM would be the way to go in conserving battery life rite?

I am using the built in email app. Is there a method for me the set wlan as the primary connection instead of 3g? Or do I have to set it manually for the web browser as well?

yes, you can set both the email and for your web browser independently.

just go change it in your email settings as well as your web browser settings. set it to whichever connection that you want as primary.

Ok if u want to find product code.. U must find the product code specific to ur set colour.. Dont need hk de.. Jus singapore can d.. Wat is ur set colour? Regarding my twiking.. I install font in my e71 which enable me to view chinese.. But i still cant type chinese .. But it is better than unable to view lor.. Later ah.. The guide is on my laptop.. View upload it here later on.. As not many will do tis jus to enable viewing .. Most of time they do it to make thier ser font better or suit their theme..

Oh..ok, cause i didn't let it standby for 5 min, i just quote the average with backlight when i start the profiler. a misunderstanding of evaluation. but i trust yrs will also last this long with my usage and 1548mAh.

---

Added on August 20, 2009, 11:59 amHmm..is it difference setting ? cause i dun face this problem in umit or gsm, althought i set my phone to only use gsm to conserve bat..but no pop up after calls or something.

This post has been edited by Chester77: Aug 20 2009, 11:59 AM

How To Add Unicode Fonts to Symbian:

If you are like me, who got a Nokia E71 with only English but wants to view contents in other languages - e.g. Chinese, Japanese, Korean (CJK), Russian, Hindi, etc. then you will be in a bit of strife.

According to Nokia forum, there is no way that you can install an extra language package on Nokia. You'd have to go to Nokia Care to have them install it for you, for a fee!

Fortunately, the Symbian guru oasisfeng has created a wonderful software called FontRouter. The latest incarnation of the software is the FontRouter LT.

Step 1 - Downloading the Software

There are many versions on the oasisfeng web site, the version that I used was the FontRouter LT for Symbian 9 Beta (Build 20071109) Open Signed Online测试版.

Also download the TrueType font from the same web site: 【TrueType】方正隶变 GBK字体. This contains all the CJK characters(should contain other european characters too). Note that I tried using other Chinese TrueType fonts and my handset failed to start. So experiment with other .ttf files only after you have successfully installed and tested with this one. I am currently using the 方正准圆(FZY3JW.TTF) which is a Chinese true type font and its English characters are very close to the original font on my Nokia E71.

Step 2 - Signing the Software

Symbian is pretty rigorous when it comes to security. Software needs to be digitally signedbefore installing onto the phone. You can try installing the .sis file just as it is and your phone will reject it and complain that the digital certificate/signature is invalid or something of that nature. To sign the file you just downloaded, you will have to go to www.symbiansigned.com. On its front page, there is a URL for openSignedOnlin (Beta). Click this URL and fill in the form on the following page. Note:

* The IMEI number uniquely identifies your handset (e.g. if your phone is stolen, you can report it to the carrier and they can bar the IMEI from the network so that the thief cannot use it). You can find it out by 'dialing' *#06#
* Email - make sure you use a valid email address because you will need to retrieve email from Symbian to carry out the next steps.
* The Application is the .sis file you just downloaded from FontRuter.

Upon successful submission of the form, Symbian will send you an email with a URL to confirm the submission. Click it.

Then Symbian will send you another email with a URL to download the signed version of the .sis file. Just click the URL and save the file.


Step 3 - Installation

Now you can install the signed version of the software that you just downloaded from Symbian using PC Suite. Make sure you install it on the Memory Card, NOT on the Phone Memory (otherwise, if it hangs your handset, you will not be able to bring your phone back to life). During installation, it will warn you that your phone is incompatible with the software, just ignore it and continue.

Then copy the fzlb_gbk.ttf file downloaded in Step 1 into the Memory Card's \data\Fonts directory. You will notice that the file FontRouter.ini has also been created in this directory by the software installation process.

Now it is time to modify the FontRouter.ini file. You can use the Windows Nodepad to edit a copy of the file and then copy it onto the handset using PC Suite. Modify the two lines of the .ini file as following:

FixFontMetrics=0
FixCharMetrics=0

changed the values from 0 to 1 like this:

FixFontMetrics=1
FixCharMetrics=1

and leave everything else the same. If you don't make the changes, the fonts will be curtailed either from the top or bottom.

That's it. Phew! Now it's time to test it - bounce the phone (i.e. switch it off then on).
Euphoria!

This post has been edited by xavi5567: Aug 20 2009, 12:04 PM

yeah if my usage is like yours, defintiely i'll be able to last as long as you. but unfortunately, i have emails coming in and going out every other minute.

sms, calls etc. 2 days plus of usage is good enough for me. lasted double the time before i disabled the tsrautostart.exe

Thanks for the upload of guide in the chinese fonts bro xavi. my E71 is Grey steel, product code i looking is Malaysia / Singapore / HK (HK got A4 input i heard) and i think mine definately NOT asia pacific code, as i looked in the web, got some code and a standard 1 for Singapore i found. Now using V200, still considering to update to V300 for asia pacific. But as in future also need update if they come out with better fixes and new features. so that's y i start researching of this issue. Any others that u know we may share here..

Code: 0560654: RM-346 APAC-R SINGAPORE GREY STEEL this should do the trick

Thanks bro. got it..
but this product code i direct key in the nokia software updater to get the firmware or must i "flash" my own product code ?
The NSS need to attach any cable like those tech at lowyat use a "gadget" to attach at the battery slot to do some "flash" or programming" ?

I saw them doing it when i screw up when i update to V200.21.118..(euro Version) and go to change back to current firmware with chi input and reading.

This post has been edited by Chester77: Aug 20 2009, 01:17 PM

hi, xavi5567..
i loaded the FontRouter LT for Symbian 9 Beta on my E90, now can read chinese, but cannot write, is this software just for view the chinese charactor right, not for writing?..

before this i was use the Psiloc Crystal Chinese Trial, but i don't think i will buy this.. USD86.50

read up this: changing ur product code

Well, e_trade, i thought u have know it already as a phone dealer , if yr E90 don't have chinese input, i think u have to 1st check the language setting, if the language setting of the phone only provide u eng, french, portugese...etc with NO chi option. Then i assume your case same as mine when update the firmware thru NSU.

my suggested solution have 2 by so far sharing from xavi and others on net

1) Take to NSC,(easy for u with your network in the mobile) ask them to give u a Asia Pacific firmware that can view and input chi.

2) If u decide to take a "learning tour", then check yr product code and debrand it..(but no point for u to try if yr E90 is ori and still with warranty) as debrand will viod yr warranty..tht's what i learn from the uncle google.

cause just lost my E71 , so using a used E90 which don't support the chinese, try the NSS to upload also not working, kebetulan read the reply from xavi, installed and can read but cannot write..
ha ha, the E90 is ap set, so the NSC also won't help..

ya the step is jus to enable u to view but not to write.. to write need to paid.. sien la.. can read is good enough for me.. as my phone is used by my gal most of the time to read online chinese novel..

ya la, same to me, at least can read the chinese msg then is okay..
xavi, thanks for sharing..

changing product code wont actually void ur waranty la.. u can always change back ur product code de ma.. anyway.. ap set waranty dont cover tat much as those of ori anyway.. so u pretty much free to do want ever u want with ur set.. the consequences is bear by urself..

---

Added on August 20, 2009, 3:35 pmyup .. so anyway..which branch will u normally be ah? wanna go to ur shop to buy some thing for my e71..

This post has been edited by xavi5567: Aug 20 2009, 03:36 PM

Wow didn't know u also use E71, any so unfortunately u lost it?? bad luck man. The ori bat for me now works fine (if u still remember me la). and i also change my bat with the guy i bought the phone, he also give me a fake 1, this one is 97% looks like ori, cause i compare few things include the finishing. Only 3% now that lack is still the Sticker (not as bright as ori sticker) that's all.