highest load 49c?dmm thts at my current idle at stock cooler

mine idle around 45 degree celsius
49 during load kinda impossible for my pc

thats under his condition la
my 88gt with accelero s1 rev.2 + cm 70cfm led fan load <50c also.

I bought my Artic Cooling Extreme Cooler from Acecombat @ RM220.

Unfortunately, I have to wait till Wednesday to get to use my entire new CPU as indicated on my signature.

I wish that cooler can fit on my GC, it is friggin hot.

Somemore the stock cooler so damned solid already.

Should be ok provided you reverse the HDD cage
This case can fit 8800GTX with HDD cage reverse with some room to spare
And tested and fitted 9800GX2 with one hdd removed and hdd cage on stock position

A new cooler from Zalman for Geforce 9800 series.

Zalman VF2000 LED

Unfortunately there isn't one from Zalman for Geforce GTX series.

Looks good to me... pricey..

i also need to place my hdd on lower place to plug in the gtx 260
besides that, i lower my dvd drive to 2nd position coz the cable kinda shorter when plug into mobo coz the gtx 260 just too long for my mid tower ATX casing
i think normal mid tower casing can store 1 gtx200 series gc without problem of coz u need to arrange other hardware position
btw, i sure cannot store 1 4850X2 inside my casing

at current moment aftermarket cpu coolers available for GTX series (260,280,285) is the 1 artic cooling only rite?unless u buy 1 already installed with custom cooler like palit

btw wonder if here got sell dis

Inno3D GeForce GTX 260 iChill Accelero XXX
http://www.inno3d.com/products/graphic_car...ccelero_xxx.htm





review on guru3d
http://www.guru3d.com/article/inno3d-gefor...-review--test/1


btw just measured the remaining space behind my card in my cm690,if the artic cooling cooler is longer by stock at about 1inch,thn its jz fit only 1 or 2 mm more touch the hdd rack edi

This post has been edited by ZeneticX: Mar 23 2009, 04:44 PM

31C more lower than Nvidia Normal stock cooling on GTX260...emm this is interesting

I don't think we'll ever see Inno3d products in Malaysia.

If Palit adopts that 3rd party cooler, that would be great.

And yes that card will definitely fit into a CM R690 casing and will not fit into most of the other mid-tower casings.

All we can hope for is to see Artic Cooling get some competition in 3rd party cooling for the GTX series card.

Too bad this cooler cannot support Tri-SLI.... Haihz.... Watercooling better....

if used water cooling and want Tri-SLi ..only way is Swifttech GC WC that was expensive....LOL

I can't imagine going Tri SLI with stock coolers.

I reckon it is too hot with just two of them using stock coolers.

Maybe the GPU makers should stop designing cards that runs 70-80 celsius @ load.

place your rig right beside the air con

It won't be too hot since they promoted Tri-SLI out of the box.... If like that, then NVIDIA can close shop.... I'll try that once my 3rd card reaches my hand....

Anyone has any experience with either Gainward or Palit GTX260 OC? It's twin cooler with cooper based seem to be powerful.

I still think ASUS Matrix is awesome tough but kinda pricey.

not sure, never see an impress oc result of it.

hi all.grahic card newbie here.i bought a new 8500GT and idle temp is about 67C with stock heatsink by using realtemp/speedfan measurement.is it normal?