try furmark bro...hehe
me still using auto setting to my fan...
so ble tahana lama la...hehe
but 80c normal for me...
if 99c panic wor...

hey i have a question, i own a geforce 8600GT DDR3 256mb (XFX, factory clocked, that's what it says) u think what's the max temp for safe sides ah? sked to open my GTA IV -.-

ALL GC can withstand 110C...8600GT is using 80nm G84 Core ...this core can withstand 110C.....someone test it already

This post has been edited by RegentCid: Jul 8 2009, 11:13 PM

guys.. can my mobo fit leadtek GTX 260 Extreme+?
My mobo is MSI 945P/G/PL Neo2 Series.

as long ur mobo hav pcie or pcie gen 2 slot (recommended)

what u should concern is ur power supply,ur casing space and ur proc to avoid bottleneck

yups it will fit.. consider other part in your system to get fully optimize of the card

oo..my proc is Pentium Duo Core 3.40GHz, 1GB DDR2 667 RAM(to be upgrade). will get a psu that suit that card. so, my system can fit this card ma?

it should fit..refer to your system dimension..

hi folks....

wanna ask u smthng....

im not quite into gaming... but somehow spending plenty of times on weeknd for gaming.. heheheh

so.. i need ur recomendations guys... what's da optimum (not powerful) graphic card that best suit my system..

my spec as follow..

Pentium Dual Core ES200@2.50GHz
2Gb ram
Motherboard:MSI G31M3

so, which is the suitable gc that my processor can handle at its bottlenecking...

thanks ya'all

GTS250

Pentium D is too SLow for GTX260....the bottleneck is too huge.....I got test this Pentium D with my 8800GTS G80 320mb Graphic card before the result is so worst....On Gaming the result is same as C2D 2.5ghz Processor with 8600GT = Pentium D 3.6Ghz with 8800GTS 320Mb....the FPS is totaly same in almost all condition.


SO PEntiumD is so bottleneck to old 8 Sereis already this GTX200 series will be bottleneck it more and more

change proc to the latest one, min C2D...that you won't feel the bottlenecking...

nobody answering...

ur cpu is ES200?
is it E5200?
gts 250 i think is ok for u

hi all, need some pointers from the nvidia master here.

i'm planning to buy a Nvidia Geforce 9800GTX or Geforce GTX 275, the specs for both cards says the slot is PCIE 2.0 x16, but my motherboard is Asus P5ld2-SE, which only have a PCIE x16 slot (it should be PCIE 1.0 x16), so can my board work with the above mentioned card??

Thanks!

yes, u shld be able to work it but there will be a little bottleneck since the card it PCIE 2.0 whereas your mobo is PCIE 1.0

thats good to hear. coz currently my 8800GT is goin into power saving mode when playing Anno 1404, everything just goes black, then u can hear the sound loop, after that, need to hard reset, then you can hear 3 beeps from the motherboard and it wont boot up window. whole thing just stay black, THEN, need to shut down the whole cpu power, only then can turn on and boot normally into window.

so anyone have this kind of problem?? any way to fix it?

BTW, my PSU is 500W. Intel Pentium D 3.0 Ghz. 2gig RAM. Asus P5LD2-SE Mobo. could this be a power wattage problem??

Thanks Again!

i think it's the power insufficient problem. do take in consideration what's the recommended power to the gc..maybe u missed it..and also the current rating your psu can supply. normally, real power or continuous power psu(which is more then average psu) got no problem, they built for those power hungry system.

Most probelm should be your Ram problem or mobo Bios problem....BTW your Processor is Pentium D also...your 8800GT only works like 8600GT only for sure because the bottleneck is too huge to your GC .....slow slow slow

Hah?! really ah?? then even if i buy GTX275 also only works like 9800gtx only??

---

Added on July 9, 2009, 11:48 ammy current PSU is ACBEL 500w, thats whats printed on the sticker. so actually how to calculate real power or continuous power??

This post has been edited by inkle: Jul 9 2009, 11:48 AM