Bro cstkl1, so that means the GTX 285 will never be able to work with the EVGA voltage tuner? since 285 uses the Intersil ISL6327. No wonder GTX 280 is in the supported list instead of GTX 285

This post has been edited by metsatsu: Mar 3 2009, 06:53 PM

dont need
just vmod edit the bios and flash it.. whats so hard..
i normally hate software overclocks. cause its inconsistent and also depends on the software running int he background

yup gtx285, gtx260 55nm will never be able to ..

oh yah... true forgot lol

The onli good thing about software is that can test 1st before applying the settings to the bios....

eh bios also can set core clock ??
i thought only can adjust volt only >.>.

can.... u can set the bios volt, core, etc...
then next time u boot your computer no need to re-set it...

under wat settings usually?to set the gc volt and core

but..adjusting the bios setting might void the warranty ??
i want to do so >.<

dont set the vid table in the bios unless u know what ure doing..

when i say vmod its physical vmod of the card

warrantty easy.. if card dying
just blind flash the card back to the original bios
and take off the soldering work uve done ( take note u got to be good with this.. its not hard just some kemahiran hidup at work here)

gtx295 however u can change vid in the bios


This post has been edited by cstkl1: Mar 3 2009, 09:38 PM

looks hard
i need to find tutorial for this
what software u use to get in bios setting??

Tats really a killer design..with black pcb...i think the price can get 1 GTX280..

and blind flash is both scary and fun at the same time.

manage to oc to 701/1220/1425 2day and passed vantage's graphic test 1 and 2 but the card fecking failed on a featured test .gonna gv up on oc-ing for the moment being

This post has been edited by ZeneticX: Mar 3 2009, 10:13 PM

u also mentioned that u edit the bios. which software are u using for editing bro?

---

Added on March 3, 2009, 10:23 pmthat sounds very sad bro.... dun give up lol

This post has been edited by metsatsu: Mar 3 2009, 10:23 PM

nice...try disable the featured test and c the marks first...and how about the temp bro? got reach 90c? ><"

use nibitor to edit nvidia bios

except for gtx295/gtx285 u need nibitor 4.9..
only available for download if u donate a certain amount..

to flash use nvflash
run in bootdisk .. floppy.. usb.
commands are easy
nvflash -i(0,1,2,3,4,5.. gpu) -4 ( overide the protection) -5 -6 (name of bios).rom
to backup
nvflash -b -i(01,2,3,4,5..gpu) (name of bios example backup.rom).rom

gtx 295 or sli systems

example like me
nvflash -b -i0 zotac1.rom backup second card
nvflash -i0 -4 -5 -6 ftw.rom for first card
nvflash -b -i1 zotac2.rom backup second card
nvflash -i1 -4 -5 -6 ftw.rom for second card

gtx 295 should be the same.

take note its ure risk to find the correct bios etc and trust the person who gave it to u.

have fun

This post has been edited by cstkl1: Mar 3 2009, 11:00 PM

omg thanks bro. at least I get the idea now.
but yah, that's why I was wondering about Nibitor 4.9. I can only find 4.8. Guess I will just have to wait a bit. so far, I'm quite satisfied with the GTX 295's performance. even at stock voltage of 1.038V gives enough juice to push from 576/1242/999 to 658/1418/1105, and it's not even the maximum. Only that sometimes my hands gatal, just feel like pushing its limit and see how far it can go.

This post has been edited by metsatsu: Mar 3 2009, 11:06 PM

will try again in the future but nt so soon for sure .is gc oc capability related anyway to the mobo or psu?

didnt monitor the temp since im inside vantage when the crash happen and my display goes full green then blank,nid to press the reset button

btw my card is flashed with custom vmod bios bringing up the extra to 1.12v



This post has been edited by ZeneticX: Mar 3 2009, 11:17 PM

nibitor vgpu tweaking will help ?
I even tweak my 88gt to 1.2v , no effect on stability

u cannot change vid numbers on gtx 260,280,285

only 295

so ure busted..