work! work! dont play play.. .... later no ammo but but toys....

takpe can wait for bonus...june is coming...for u guys la..for me no bonus

so guys, no one has Yamato 1/60s with broken/ cracked shoulders?

Thanks,
Ray

I got for the first VF-1S, but still playable. Honestly I don't care too much the issue, cos I transformed too many times already. and I keep other Valks in display, play only VF-1S

and I refrain myself for not to buy any new 2nd version of 1/60s untill Yamato fix this..hopefully

Thanks bro. I'm reading thru Macross World and it seems like a prevalent problem. Gonna inspect my set, VF-1S (DYRL), VF-1A (DYRL) and VT-1 that are considered problematic. Also the VF-1S has been transformed only once, the VF-1A has not been played with and VT-1 is still MISB. It would suck if the hinges on the shoulders are cracked. Makes we want to go Bandai from now on.

Will keep you guys updated.

Thanks,
Ray

This post has been edited by shuenray: May 12 2010, 03:37 PM

hi ray,

it is a prevalent problem for the 1/60 v2 releases up till VF-1S Max IIRC....
my roy VF-1S, Hikaru VF-1A, Hikaru VF-1J & VF-1D came with cracked shoulder hinges (fresh out of the box, except roy which i abused more)

lemme see if i can find a pic.......

this is from my VF-1S Roy...started with some stress marks...then a large chunk dropped off one day....

need to be careful with these guys...if possible check thru all your valks to see if there's any stress marks...
i got some replacement hinges from a macworld boardie

hope this helps...

This post has been edited by niVL@Boy: May 12 2010, 04:03 PM

hoping for bandai konig release soon

My 1S and 1J both have cracks and fixed them with super glue. I also received my replacement shoulder hinges thanks to Graham of Macrossworld for USD $2 only

got an extra? or can tumpang?

Hey sorry if this was asked before already...

Is there anywhere that I can get the Yamato 1/60 VF-1S unassembled model kit? And how much would it cost?

Please PM me or post here if you are selling or you know where/who to get it from..

Thanks!

never seen a yamato's model kit...
but i do spotted hasegawa's tho...

HLJ has it for sale

http://www.hlj.com/product/YMT00185

The production pics look good but don't think there are any finished pics or reviews of it online?

Also I guess its mainly for display purposes once its painted and with stickers slapped on

I did some checking on my VF-1S, VF-1A and VF-1D. Glad to report that it's all clear for now , no cracks or anything. Didn't check my VT-1 cause still MISB, sayang la.

Thanks,
Ray

---

Added on May 13, 2010, 11:38 amGuys,
Anyone here owns a mighty block stand? Looks like a cheaper alternative to the valk stand. Only RM70 plus shipping from HLJ. Here's a pic:


Thanks,
Ray

This post has been edited by shuenray: May 13 2010, 11:38 AM

edited

This post has been edited by richard0304: May 13 2010, 12:20 PM

Working and replay forum concurrently...hahahahaha Must work hard for more ammo for :

1. VF1J Max and Miria
2. VF1A kakizaki
3. Destroid (yellow) Tomahawk and defender.
4. VF1D (if able to find)...

---

Added on May 13, 2010, 1:44 pmBro...in the anymoon review stated as below on the shoulder problem. For me, my valks i never checked as don't want to be dissapointed...but my valks always in the mode that i have set /planned. Seldom transform.. but if easy to replace then why not...

1) Focker VF-1S with Super Parts (V2) – Worst shoulders ever, avoid
2) Focker VF-1S stand alone (V2) – bad shoulders
3) VF-1A Hikaru with Super Parts (V2) – bad shoulders
4) VF-1A Hikaru stand alone (V2) – bad shoulders
5) VF-1J Hikaru with Super Parts (V2) – Potentially bad shoulders (far less frequency than the first four releases.. allegedly Yamato urged the factories to be more careful at this point… hell of a fix.
6) VF-1J Hikaru stand alone (V2) – potentially bad shoulders
7) VF-1S Hikaru with Super Parts (V2) – potentially bad shoulders
8′) VF-1D Trainer (V2) – I haven’t heard of a single broken one… rumor is that this release has smaller shoulder pins but I can’t substantiate that
9) VF-1S Max (V2) – Rumored to be safe (if you have any insight, please leave a comment)
10) VF-1A Max TV (V2) – Rumored to be safe
11) VF-1A Max DYRL (V2) – Rumored to be safe
12) VF-1A Hayao TV (V2) – Rumored to be safe
13) VF-1A Hayao DYRL (V2) – Rumored to be safe
14) VF-1J Cannon Fodder (V2) – Rumored to be safe
15) VF-1A Cannon Fodder (V2) – Rumored to be safe
16) VT-1 SuperOstrich (V2.1) – potentially bad shoulders (!)
17) VF-1S LowVis (V2.1) – Rumored to be safe
18) VE-1 Elintseeker (V2.1) – Rumored to be safe (review pending)
19) VF-1D Virgin Road (V2.1?) – Rumored to be safe (Let me know if you own one if it’s a V2 or V2.1)
20) VF-1J Miria (V2.1?) – Rumored to be safe but has some delicate paint
21) VF-1J Max (V2.1?) – Rumored to be safe but has some delicate paint
22) VF-1S Focker Anniversary (V2) – Rumored to be safe
23) VF-1S Hikaru Anniversary (V2) – Rumored to be safe
24) VF-1J Hikaru with GBP (V2) – Reissue of stand alone with potentially bad shoulders

Bro Iman,
any update on the Konig? what is the targeted price...it should be huge i guess...

This post has been edited by Poyo fc: May 13 2010, 01:46 PM

Deleted.

This post has been edited by blowsperior: May 13 2010, 05:38 PM

Bro,
Thanks for the info been following that site and MW actively. So far so good for me

Thanks,
Ray

i want but kinda too expensive

Bandai - DX Chogokin - Macross VB-6 Konig Monster SP Ver. (Ship SEP 2010)

http://www.xl-shop.com/xlshop/pages/produc...=PRE_BAN-640864



how big is this thing actually? same size as yamato?


This post has been edited by Strike: May 14 2010, 08:52 AM

ya lor... they dun have the normal version?

i dun think it will be same ratio as 1/60s, maybe will be 1/100, and will be around same size as other valks instead of being a lot bigger.