can't, d bracket is of blow up type...

oh... thn nid buy other kit for it if 1na put as blow backward... thn i will no more cheap..
mayb js go to a blow in type de as gemin II S or geminII will ok i thk...

i thought when noctua use screw abit leceh.. but atleast still can customize the orientation.. lucky me.. change different mobo also still ok..

d nearest u can get is thermalright s clip, but i'm not so sure d pressure will be as gud as normal clip. i have one which i used it b4 on hp-1204, gonna use it again on my upcomin true.

yeah, noctua is like scythe, can orientate d cooler 360'... that's one of d reason why i luv scythe coolers for mild/moderate oc setup (but too bad i dun think they're gud enuf to handle heat monster like amd quaadies, esp those 125w chips).

This post has been edited by ah_khoo: Oct 17 2008, 02:10 PM

Bleh..Menchelsea..Increase A NB/SB Link Clock or Voltage?There is no Voltage option o
What voltage need increase nia..

@ah_khoo
is there any different if i clock my 4800+ @3.2GHz vs 6400+ BE at stock?

Yes..6400 BE has higher transistors..Eventhough you have the same clockspeed..

as mentioned, windsies have lower latency than brisbies which make 'em better. but if u can do a 3.2GHz w/ < 1.45v, i think brisby will have lower temp (thou u'll have no idea wat's d real temp since brisbies come w/ spoilt dts ). 6400+ is of 125w, & trust me, it's really hot.

This post has been edited by ah_khoo: Oct 17 2008, 02:22 PM

is it noticable? worth for upgrade?

if i were u, i replace it w/ a 8450 since ya board support phenoms... no point playin 6400+, d $$$ will be more well spent on a toliman or even a proven 3800+ f3. just my 2 cents thou...

This post has been edited by ah_khoo: Oct 17 2008, 02:25 PM

Barely noticeable.And no,not worth for upgrade.If you still upgrading better get X3 instead.Or wait X2 6500

that's the main reason why i switch.. >2 core overkill to me..
but no option avail by that time.. X2 6500 should be good..

now X4 getting cheaper.. better upgrade those.. somemore the BE got heatsink too..

one of my friend offer me.. he want to upgrade to phenom.. hv to turn him down.. currently waiting for 8750 BE.. but the TDP is 95W.. i'm not sure if my board can withstand x3

This post has been edited by sharkeer: Oct 17 2008, 02:32 PM

here stated ok
http://www.biostar.com.tw/app/en-us/t-seri...rt.php?S_ID=353

but not sure about highend X4... but still can support 125W

Definitely can lo
Btw wan to ask anyone using ram cooler? Between OCZ and corsair, which ram cooler is better?

support k10..!!!
blive me.. i'm 1 user which change frm k10 to k8..
beter stick to phenom..
get a x3 if moderate buget, x4 if hv buget, phenom x2 if u can wait..

ok for normal usage.. i want to oc target 3GHz..

i'm more to budget see which come 1st.. money or phenom x2.. then i'll consider..

This post has been edited by sharkeer: Oct 17 2008, 02:48 PM

u need to buy n try
atleast urs got heatsink.. just blow if getting heat..

corsair... ocz air flow veli weak but w/ bling2 ofcoz...

i'm more worried bout his chipset temp... nvidia chipsets are...

Woops.. I didnt look at the pic carefully, As u mark there the retention clips hook on that mobo is not at the side..
My mobo hooks are at the top n bottom same as yours, so it would blow up not to the back..

This post has been edited by cloudwan: Oct 17 2008, 03:01 PM