that is good enough bro.. i cant even get past 3.1Ghz.. really sad

guys.. really need help here.. i've bought tracer 1066Mhz but still cant get my system stable at 1000Mhz.. i dunno wats the prob anymore

this is for my kvr.. but the setting is exactly like this.. Link

my concern is, is the ram faulty? or my imc in the proc is not good? the ram is rated 1066Mhz so at default i should be able to achieve that freq rite?

yup.. try already.. 260x10 can boot.. but higher cant. at 250x10 also can boot but suddenly restart while running orthos

happy birthday bro xixo_12

by the way, can someone help mewith my prob? as stated at post #95.. tq

already put ss at post #99

my max htt around 320..so cant hit 333 .. this ram really not good.. cant do cl4 above 850Mhz@2.2v.. my previous kvr can hit around 950 with cl4.. too bad sold edi..

max proc speed is 250x12.5=3125 @ 1.45v stable.. cant get higher freq with higher voltage ( already try up to 1.55v ) htt multiplier is x4.. i want to achieve atleast 900+ Mhz ram..

@xixo_12
get 891Mhz at 800 divider..but cant use cl4 like b4.. so want to get higher.. trfc got 4.. 195ns to all?

@ah_khoo
wat is MAL? where can i find it?

cant find it in bios.. change to 9ns in memset n freeze at window startup after uninstall memset through safe mode only can boot to windows the original setting is 6ns.. wat value should i put? 7,8?

---

Added on October 9, 2008, 1:12 pmwat's that mean? dun understand..

---

Added on October 9, 2008, 1:14 pm[quote=xixo_12,Oct 9 2008, 11:19 AM]
where u put the ram?? trfc usually mark by trfc0,trfc1,trfc2,trfc3,
so if want easy, put all 195 la..

MAL oso in timing setting, u can find it

already change but still cant get higher freq

This post has been edited by sharkeer: Oct 9 2008, 01:14 PM

i put it upward but still crash.. nvm.. tired already.. i hv to settle my fyp 1st.. rite now all setting at stock as oc not stable yet.. hope got xtra cash next month to buy new proc.. tq all for ur answer.. really appreciate it..

This post has been edited by sharkeer: Oct 9 2008, 01:29 PM

y sell ur x3? not good ar?



This post has been edited by sharkeer: Oct 9 2008, 05:22 PM

i dunno anything bout phenom oc but i prefer x2 with high clock frequency rather than x3/x4 with low freq.

i dont mean b.e wat i mean low clock is like 9100e or 8450.. b.e is sure worth it..

My SPI 1M sis imsmiko.. update pls





Attached thumbnail(s)

is 8750BE available in malaysia yet? anybody knows?

read at some website.. i think released last month.. can hit 3.4Ghz.. really tempting..

This post has been edited by sharkeer: Oct 10 2008, 09:06 PM

1.6v?

i thought with 45nm fab, stock vid should be lower.. if need 1.6v to get 4ghz, still not good enough