Enigma4646... u seem to be happy wit ur chery... y tampal mitsu badge?

better seek outside price for leather trimming / fabric trimming ....NGV ....dont la.....lots of headache later......Hidrogen or water base also an alternative ...but playsafe .....petrol la.....price going to go down further.....

---

Added on October 18, 2008, 4:48 amwhy cant I rebadge my own MPV? why dont you ask that question to NAZA / Proton / Perodua / Inokom ?

I heard Plotong also wanna rebadge Mitsu Lancer to Ploton logo next year .....

I can even tampal BMW badge .....or Mercedes badge......why you wanna give me money if I tampal back those Chery emblem ???? he he he


This post has been edited by Enigma4646: Oct 18 2008, 04:48 AM

Enigma, how much do you spend for the special number 4646, anyway, did you put in any additional accessories/ trimming? As the interior are quite easy of get dirty, especially when you'd kids, any precautions? you had taken to avoid this, kind to share?

Hey bro, how's the ride so far? I'll be getting mine somewhere around early Nov. Can't wait.

How much full tank? I was told it's RM160 only, correct?

Main point I bought mine, and the high turning ratio too. The ride is so much smoother and comfortable than my friend's Avanza.


I bought Sapphire Silver too.

Try this: http://www.newtonleather.com/

Call 03-9285 8866 and ask for Colin Wong. Said you are refer by Mr Wong (me) who will be doing full Italian leather next month. He should give you a good price around RM3400.

NGV I think around Batu Caves got. Ask the taxi drivers.

Go Chery Go!!

mana full tank RM 160 ....that old petrol price meh???? 62 liter X RM2.30 = RM 142 only ....lets assume the fuel has 5 liters reserve....left only 55 liter to be filled up .....you count yourself la.....I just filled up RM 100 = 43.48 liters ... Puchong to Sg Siput consume only RM 70 worth of petrol........

go cherry go .....huh .....cherry sounds too feminine huh ?????? go go enigma !!!!

---

Added on October 18, 2008, 6:57 pmYou agree ....saei lok saei lok.....RM 350 only meh ....got JPJ close friends....I ask for WRV ...but he gave me WRW....fuhhhh lagi leng la......

anyway to avoid scratches and dirty ....try to any accesorries shop ....find a sticker i.e. like a bus floor ....checkers design .....that is chrome ....cut it nicely and put it under the door where kids always make it dirty .....perhaps tomorrow I will do it DIY ....and post some photos here....it cost RM 38 at kedai ABANG .....other accessories shop not sure......maybe enuff for 4 pairs of that thing ......

if lebih one .....can put at the back ......we will see.....

any one dare to put 18 inch wheel yet????? Jalan Kapar how much ????? just nearby my home......if got time ....will have a look.....



This post has been edited by Enigma4646: Oct 18 2008, 06:57 PM

no offense but when you put other brand badge into your car will make it look abit stupid
just stay original and proud of what you own
hope you are not angry,it jus my opinion.

i hope your review of can change the negative mindset of chinacar overhere

---

Added on October 18, 2008, 8:25 pmdont put big rims unless you will tune your suspension setting
or else later your car performance and comfort will be bad

This post has been edited by zacevox: Oct 18 2008, 08:25 PM

Ok ok, Go Eastar Go!!

I remembered there is an invincible Chinese martial artist called "Tung Fong Pak Pai". Same like this car lor...

Maybe I name my car "Silver Surfer" when I get it.

Will take my family up Genting once I break 1000km.

why need to wait till 1000km?

Genting ??? sure 2 after review it here......

---

Added on October 19, 2008, 12:17 amhttp://www.sgcarmart.com/news/review.php?AID=11

---

Added on October 19, 2008, 12:55 amFew Comparisons....

Honda Stream 1.8 RSZ (A) specifications

Engine
Engine capacity 1,799 cc
Engine type 1.8 SOHC i-VTEC
Compression ratio 10.5
Bore x Stroke (81.0 x 87.3) mm
Power 140 bhp
Torque 174 Nm
Performance
Acceleration unknown
Top Speed unknown
Fuel consumption 14.8 km\L
Misc technical data
Transmission 5-speed automatic with paddle-shift
Drive type FF

Measurements
Dimensions (L x W x H) (4570 x 1695 x 1545)mm
Wheelbase 2,740mm
Min turning radius 5,500mm
Kerb weight 1,400kg
Fuel tank capacity 55L
Brakes
Brakes (Front) Disc
Brakes (Rear) Disc
Suspension
Suspension (Front) Macpherson strut type
Suspension (Rear) Reactive-link, double wishbone

Chery V5 Crossover 2.4 (A) specifications

Engine
Engine capacity 2,350 cc
Engine type 16-valve DOHC 4 cylinders in-line EMPI
Compression ratio unknown
Bore x Stroke unknown
Power 130 bhp
Torque 198 Nm
Performance
Acceleration 15s (0-100kmh)
Top Speed 178kmh
Fuel consumption 11.3 km\L
Misc technical data
Transmission 4-speed automatic
Drive type unknown

Measurements
Dimensions (L x W x H) (4662 x 1820 x 1590)mm
Wheelbase 2,800mm
Min turning radius unknown
Kerb weight 1,505kg
Fuel tank capacity 62L
Brakes
Brakes (Front) Ventilated disc
Brakes (Rear) Disc
Suspension
Suspension (Front) Independent MacPherson strut with cylindrical coil spring, dual-acting tube damper and anti-roll bar
Suspension (Rear) Independent Multi-link type with cylindrical coil spring, dual-acting tube damper and anti-roll bar

Kia Carens 2.0 (A) specifications

Engine
Engine capacity 1,998 cc
Engine type 2.0L 16-valve CVVT
Compression ratio 10.5
Bore x Stroke (86.0 x 86.0) mm
Power 145 bhp
Torque 189 Nm
Performance
Acceleration 11.9s (0-100kmh)
Top Speed 181kmh
Fuel consumption unknown
Misc technical data
Transmission 4-speed automatic
Drive type unknown

Measurements
Dimensions (L x W x H) (4545 x 1800 x 1650)mm
Wheelbase 2,700mm
Min turning radius 5,400mm
Kerb weight 1,418kg
Fuel tank capacity 55L
Brakes
Brakes (Front) Ventilated disc
Brakes (Rear) Disc
Suspension
Suspension (Front) MacPherson strut with coil spring
Suspension (Rear) Multi-link with coil spring

Toyota Wish 1.8 Aerosports (A) specifications

Engine
Engine capacity 1,794 cc
Engine type 4 cylinder 16 valves VVT-i DOHC water cooled
Compression ratio 10
Bore x Stroke (79.0 x 91.5) mm
Power 132 bhp
Torque 174 Nm
Performance
Acceleration unknown
Top Speed unknown
Fuel consumption unknown
Misc technical data
Transmission 4-speed automatic with super ECT with sequential shiftmatic
Drive type unknown

Measurements
Dimensions (L x W x H) (4560 x 1695 x 1590)mm
Wheelbase 2,750mm
Min turning radius 5,300mm
Kerb weight 1,300kg
Fuel tank capacity 60L
Brakes
Brakes (Front) Ventilated disc
Brakes (Rear) Disc
Suspension
Suspension (Front) MacPherson strut type, Coil spring
Suspension (Rear) Torsion beam type, Coil spring

Mitsubishi Grandis 2.4 G (A) specifications

Engine
Engine capacity 2,378 cc
Engine type 4G69 MIVEC
Compression ratio 9.5
Bore x Stroke (87.0 x 100.0) mm
Power 165 bhp
Torque 217 Nm
Performance
Acceleration unknown
Top Speed unknown
Fuel consumption unknown
Misc technical data
Transmission INVECS-II 4-speed automatic with sports mode
Drive type unknown

Measurements
Dimensions (L x W x H) (4775 x 1935 x 1685)mm
Wheelbase 2,830mm
Min turning radius 5,500mm
Kerb weight 1,690kg
Fuel tank capacity 65L
Brakes
Brakes (Front) Ventilated discs
Brakes (Rear) Drum-in discs
Suspension
Suspension (Front) Macpherson strut coil springs
Suspension (Rear) Semi-trailing arm coil springs

Toyota Alphard 2.4 AX (A) specifications

Toyota Alphard 2.4 AX (A) specifications

Engine
Engine capacity 2,362 cc
Engine type IMZ-FE, 4 cylinder, Inline, DOHC
Compression ratio 9.6
Bore x Stroke (88.5 x 96.0) mm
Power 157 bhp
Torque 220 Nm
Performance
Acceleration unknown
Top Speed unknown
Fuel consumption unknown
Misc technical data
Transmission 5-speed automatic super electronically controlled
Drive type unknown

Measurements
Dimensions (L x W x H) (4845 x 1830 x 1935)mm
Wheelbase 2,900mm
Min turning radius 5,800mm
Kerb weight 1,790kg
Fuel tank capacity 70L
Brakes
Brakes (Front) Ventilated Disc
Brakes (Rear) Disc
Suspension
Suspension (Front) MacPherson strut
Suspension (Rear) Torsion beam

Toyota Alphard 3.0 MS (A) specifications

Engine
Engine capacity 2,994 cc
Engine type 1MZ-FE watercooled V-6 DOHC
Compression ratio 10.5
Bore x Stroke (87.5 x 83.0) mm
Power 220 bhp
Torque 304 Nm
Performance
Acceleration unknown
Top Speed unknown
Fuel consumption unknown
Misc technical data
Transmission Super intelligent 4 automatic
Drive type 2WD

Measurements
Dimensions (L x W x H) (4845 x 1830 x 1935)mm
Wheelbase 2,900mm
Min turning radius 5,800mm
Kerb weight 1,850kg
Fuel tank capacity 70L
Brakes
Brakes (Front) Ventilated discs
Brakes (Rear) Disc
Suspension
Suspension (Front) Strut coil spring
Suspension (Rear) Torsion beam coil spring


Toyota Estima 2.4 Aeras (A) specifications

Engine
Engine capacity 2,362 cchttp://forum.lowyat.net/index.php?act=Post&CODE=02&f=20&t=803752
Engine type 2AZ-FE 4 Cylinders DOHC with VVT-i
Compression ratio 9.6
Bore x Stroke (88.5 x 96.0) mm
Power 170 bhp
Torque 224 Nm
Performance
Acceleration unknown
Top Speed unknown
Fuel consumption 12.4 km\L
Misc technical data
Transmission Super CVT-i with sequential shift-matic
Drive type FF

Measurements
Dimensions (L x W x H) (4795 x 1800 x 1730)mm
Wheelbase 2,950mm
Min turning radius 5,700mm
Kerb weight 2,140kg
Fuel tank capacity 65L
Brakes
Brakes (Front) Disc
Brakes (Rear) Disc
Suspension
Suspension (Front) Macpherson strut type, Coil spring, Independent
Suspension (Rear) Torsion beam axle



This post has been edited by Enigma4646: Oct 19 2008, 12:55 AM

lol
my grandis fc only rm120 full
+164hp with 2.4l

but chery not bad..
just wonder why its so cheap only 8x,xxx
then gt 2.4l mitsu engine and honda stream need 14x,xxx but with 1.8l

because it's china's brand... if this is mitsu brand it would be rm140-180k already

btw 1.8 wish FC is rm105 = 550km

average 14km per litre

50% city & 50 % highway

This post has been edited by AiRBooM: Oct 19 2008, 01:29 AM

Enigma, pls. post us the DIY once it is completed, maybe will copy your design...hopefully no need to pay royalties-hor...

ha ha ha pray dont rain this afternoon.will update later.FC according to spec. 11km a liter ie 22 cent a km for a 2.4liter.why this Eastar is cheap bcoz China has 'copy it right '....even a grandis version I already saw in one of d china forum!

"Acceleration 15s (0-100kmh)" the data is WRONG!
the sgcarmart.com content mentioned 11s, but the title put 15s ??
15s will be as slow as old hilux pickup already

they did mentioned used tiptronic can get 11s maaaa...15s is using std auto gear ( spec in brochure )......faham meh???? i own one ...and i did tried .....can prove to below 10s if using oped pod air filter........

---

Added on October 19, 2008, 1:04 pm"There, sitting placidly under the hood, was a Mitsubishi-sourced 2.4l SOHC 4G64 engine – nothing like the workhorse 4G63 performer but still a monster when it came to torque. As an encore, it brings the car to 100km/h from standstill in only 11 seconds.

This was done with the automatic shifted into ‘tiptronic’ mode. The major limitation here was that there were only 4 speeds to play with, soaking up the ‘fun’ factor from the overall driving experience." quote from thr review

---

Added on October 19, 2008, 1:10 pmChery A1

---

Added on October 19, 2008, 1:38 pm

Chery A1 1.3 5dr (M) specifications

Engine
Engine capacity 1,297 cc
Engine type 4 cylinders inline, 16 valves, DOHC, EMPI
Compression ratio unknown
Bore x Stroke unknown
Power 82 bhp
Torque 114 Nm
Performance
Acceleration 16s (0-100kmh)
Top Speed 156kmh
Fuel consumption 16.6 km\L
Misc technical data
Transmission 5-speed manual
Drive type unknown

Measurements
Dimensions (L x W x H) (3700 x 1578 x 1527)mm
Wheelbase 2,390mm
Min turning radius 4,750mm
Kerb weight 1,040kg
Fuel tank capacity 43L
Brakes
Brakes (Front) Disc
Brakes (Rear) Drum
Suspension
Suspension (Front) Independent MacPherson struts with cylindrical coil springs, dual acting tube damper and anti-roll bar
Suspension (Rear) Semi-independent trailing arm type with cylindrical coil springs and dual acting tube damper


This post has been edited by Enigma4646: Oct 19 2008, 01:38 PM

tis 1 nt bad..
i think the price can be considered since the mpv only 8x,xxx
the should be 5x,xxx-6x,xxx

If CKD sure cheap one.....not bad huh .....it was Italy 'claim' designer by Cherry ....price diff between CKD and CBU I think around RM 50K ........

To Dynasan ....sorry today Shah Alam ...rain heavily .......and lots of open houses .....the sticker purchased already at RM35 ......for a meter length.....perhaps tomorrow....I start my DIY.......just get back from Sepang ......Naza Ria pun 'Kena' .........he he.......at 22 cent a KM ......you only need RM 100 for a 450KM of journey .......driving speed 90-100KM/H .....

sure....looking forward for the photos.
makan Naza again ar...sure your 46464 will be well known liao...

---

Added on October 20, 2008, 1:04 amRm100 for 450km is not bad...even my old WAJA will give Rm140 for about 500km (city driving)

This post has been edited by dynasan: Oct 20 2008, 01:04 AM

haimeh?.....just test the capability....

Hey Dynasan,

Got you car already? How izzit? Have you change to full leather seats & trims?

Are you sure only RM100 for 450km on a Mitsubishi 2.4 engine? This is fantastic!!

Even my Waja makan RM130 for about 500km in the city like you.

Hey what you do with your old Waja, what is the best way to sell it off, newspaper ad?