go enigma go !!!!

makan wsih 2.0 can .........

---

Added on October 17, 2008, 3:29 pmthe time I try to makan wish 2.0 is at traffic light uphill some more.....the torque trick for chery was so great....we talking about the torque this china / mitsu is acceptable.....tonite if got time...I will upload my black enigma.....any1 know market price for airtrek 4G63T potong engine ????

---

Added on October 17, 2008, 3:31 pm198nm at 3K RPM .....gosh ...use tiptronic......fuyooooo .....bolt on turbo will improve more.....

This post has been edited by Enigma4646: Oct 17 2008, 03:31 PM

http://img253.imageshack.us/my.php?image=2...43725c46uw3.jpg

This post has been edited by Enigma4646: Oct 17 2008, 04:24 PM

Wish 2.0

Length 4560mm
Width 1695mm
Height 1590mm
Wheelbase 2750mm
Kerb Weight 1360kg
Gross Weight N/A
Fuel Tank Capacity 60 liter
Bore X Stroke = 86 X 86
Max Power = 114KW at 6000 RPM
Torque = 192nm @ 4000 RPM


Chery Mitsu 4G64 engine

Length 4662mm
Width 1820mm
Height 1590mm
Wheelbase 2800mm
Kerb Weight 1505kg
Gross Weight 2030kg
Fuel Tank Capacity 62 liter
Bore X Stroke = 86.51 X 100
Max Power = 95KW at 5500 RPM
Torque = 198nm @ 3000 RPM


--------------------------------------------------------------------------------
Added on October 17, 2008, 4:17 pmtaikoh.....ni bukan syok 2 sendiri meh .....lacing punya wooooo ....

http://img362.imageshack.us/my.php?image=2944022225cd9152758ayb2.jpg

---

Added on October 17, 2008, 4:33 pmhttp://img527.imageshack.us/my.php?image=2944022217c8296872aeiv0.jpg

This post has been edited by Enigma4646: Oct 17 2008, 04:33 PM

service cost for 20K is totally free la.....for 1st 1000 customers they are using AGIP engine oil meh....done my 1st 1000km service ....they change AGIP engine oil and chery oil filter......so no need to worry on service fee.....TOTALLY FREE.....and comes with 3 year warranty.....

FC so far RM 100 = 450KM long distance .....to east coast ....

town RM 100 = 380 KM....at RM 2.45 a liter....now will more cheaper and more distance laaa...

BTW my right foot is so 'heavy' lo.......tiptronic maniac......

---

Added on October 17, 2008, 8:17 pmone more time .....wish gone slowly in my rear mirror.........

This post has been edited by Enigma4646: Oct 17 2008, 08:17 PM

better seek outside price for leather trimming / fabric trimming ....NGV ....dont la.....lots of headache later......Hidrogen or water base also an alternative ...but playsafe .....petrol la.....price going to go down further.....

---

Added on October 18, 2008, 4:48 amwhy cant I rebadge my own MPV? why dont you ask that question to NAZA / Proton / Perodua / Inokom ?

I heard Plotong also wanna rebadge Mitsu Lancer to Ploton logo next year .....

I can even tampal BMW badge .....or Mercedes badge......why you wanna give me money if I tampal back those Chery emblem ???? he he he


This post has been edited by Enigma4646: Oct 18 2008, 04:48 AM

mana full tank RM 160 ....that old petrol price meh???? 62 liter X RM2.30 = RM 142 only ....lets assume the fuel has 5 liters reserve....left only 55 liter to be filled up .....you count yourself la.....I just filled up RM 100 = 43.48 liters ... Puchong to Sg Siput consume only RM 70 worth of petrol........

go cherry go .....huh .....cherry sounds too feminine huh ?????? go go enigma !!!!

---

Added on October 18, 2008, 6:57 pmYou agree ....saei lok saei lok.....RM 350 only meh ....got JPJ close friends....I ask for WRV ...but he gave me WRW....fuhhhh lagi leng la......

anyway to avoid scratches and dirty ....try to any accesorries shop ....find a sticker i.e. like a bus floor ....checkers design .....that is chrome ....cut it nicely and put it under the door where kids always make it dirty .....perhaps tomorrow I will do it DIY ....and post some photos here....it cost RM 38 at kedai ABANG .....other accessories shop not sure......maybe enuff for 4 pairs of that thing ......

if lebih one .....can put at the back ......we will see.....

any one dare to put 18 inch wheel yet????? Jalan Kapar how much ????? just nearby my home......if got time ....will have a look.....



This post has been edited by Enigma4646: Oct 18 2008, 06:57 PM

Genting ??? sure 2 after review it here......

---

Added on October 19, 2008, 12:17 amhttp://www.sgcarmart.com/news/review.php?AID=11

---

Added on October 19, 2008, 12:55 amFew Comparisons....

Honda Stream 1.8 RSZ (A) specifications

Engine
Engine capacity 1,799 cc
Engine type 1.8 SOHC i-VTEC
Compression ratio 10.5
Bore x Stroke (81.0 x 87.3) mm
Power 140 bhp
Torque 174 Nm
Performance
Acceleration unknown
Top Speed unknown
Fuel consumption 14.8 km\L
Misc technical data
Transmission 5-speed automatic with paddle-shift
Drive type FF

Measurements
Dimensions (L x W x H) (4570 x 1695 x 1545)mm
Wheelbase 2,740mm
Min turning radius 5,500mm
Kerb weight 1,400kg
Fuel tank capacity 55L
Brakes
Brakes (Front) Disc
Brakes (Rear) Disc
Suspension
Suspension (Front) Macpherson strut type
Suspension (Rear) Reactive-link, double wishbone

Chery V5 Crossover 2.4 (A) specifications

Engine
Engine capacity 2,350 cc
Engine type 16-valve DOHC 4 cylinders in-line EMPI
Compression ratio unknown
Bore x Stroke unknown
Power 130 bhp
Torque 198 Nm
Performance
Acceleration 15s (0-100kmh)
Top Speed 178kmh
Fuel consumption 11.3 km\L
Misc technical data
Transmission 4-speed automatic
Drive type unknown

Measurements
Dimensions (L x W x H) (4662 x 1820 x 1590)mm
Wheelbase 2,800mm
Min turning radius unknown
Kerb weight 1,505kg
Fuel tank capacity 62L
Brakes
Brakes (Front) Ventilated disc
Brakes (Rear) Disc
Suspension
Suspension (Front) Independent MacPherson strut with cylindrical coil spring, dual-acting tube damper and anti-roll bar
Suspension (Rear) Independent Multi-link type with cylindrical coil spring, dual-acting tube damper and anti-roll bar

Kia Carens 2.0 (A) specifications

Engine
Engine capacity 1,998 cc
Engine type 2.0L 16-valve CVVT
Compression ratio 10.5
Bore x Stroke (86.0 x 86.0) mm
Power 145 bhp
Torque 189 Nm
Performance
Acceleration 11.9s (0-100kmh)
Top Speed 181kmh
Fuel consumption unknown
Misc technical data
Transmission 4-speed automatic
Drive type unknown

Measurements
Dimensions (L x W x H) (4545 x 1800 x 1650)mm
Wheelbase 2,700mm
Min turning radius 5,400mm
Kerb weight 1,418kg
Fuel tank capacity 55L
Brakes
Brakes (Front) Ventilated disc
Brakes (Rear) Disc
Suspension
Suspension (Front) MacPherson strut with coil spring
Suspension (Rear) Multi-link with coil spring

Toyota Wish 1.8 Aerosports (A) specifications

Engine
Engine capacity 1,794 cc
Engine type 4 cylinder 16 valves VVT-i DOHC water cooled
Compression ratio 10
Bore x Stroke (79.0 x 91.5) mm
Power 132 bhp
Torque 174 Nm
Performance
Acceleration unknown
Top Speed unknown
Fuel consumption unknown
Misc technical data
Transmission 4-speed automatic with super ECT with sequential shiftmatic
Drive type unknown

Measurements
Dimensions (L x W x H) (4560 x 1695 x 1590)mm
Wheelbase 2,750mm
Min turning radius 5,300mm
Kerb weight 1,300kg
Fuel tank capacity 60L
Brakes
Brakes (Front) Ventilated disc
Brakes (Rear) Disc
Suspension
Suspension (Front) MacPherson strut type, Coil spring
Suspension (Rear) Torsion beam type, Coil spring

Mitsubishi Grandis 2.4 G (A) specifications

Engine
Engine capacity 2,378 cc
Engine type 4G69 MIVEC
Compression ratio 9.5
Bore x Stroke (87.0 x 100.0) mm
Power 165 bhp
Torque 217 Nm
Performance
Acceleration unknown
Top Speed unknown
Fuel consumption unknown
Misc technical data
Transmission INVECS-II 4-speed automatic with sports mode
Drive type unknown

Measurements
Dimensions (L x W x H) (4775 x 1935 x 1685)mm
Wheelbase 2,830mm
Min turning radius 5,500mm
Kerb weight 1,690kg
Fuel tank capacity 65L
Brakes
Brakes (Front) Ventilated discs
Brakes (Rear) Drum-in discs
Suspension
Suspension (Front) Macpherson strut coil springs
Suspension (Rear) Semi-trailing arm coil springs

Toyota Alphard 2.4 AX (A) specifications

Toyota Alphard 2.4 AX (A) specifications

Engine
Engine capacity 2,362 cc
Engine type IMZ-FE, 4 cylinder, Inline, DOHC
Compression ratio 9.6
Bore x Stroke (88.5 x 96.0) mm
Power 157 bhp
Torque 220 Nm
Performance
Acceleration unknown
Top Speed unknown
Fuel consumption unknown
Misc technical data
Transmission 5-speed automatic super electronically controlled
Drive type unknown

Measurements
Dimensions (L x W x H) (4845 x 1830 x 1935)mm
Wheelbase 2,900mm
Min turning radius 5,800mm
Kerb weight 1,790kg
Fuel tank capacity 70L
Brakes
Brakes (Front) Ventilated Disc
Brakes (Rear) Disc
Suspension
Suspension (Front) MacPherson strut
Suspension (Rear) Torsion beam

Toyota Alphard 3.0 MS (A) specifications

Engine
Engine capacity 2,994 cc
Engine type 1MZ-FE watercooled V-6 DOHC
Compression ratio 10.5
Bore x Stroke (87.5 x 83.0) mm
Power 220 bhp
Torque 304 Nm
Performance
Acceleration unknown
Top Speed unknown
Fuel consumption unknown
Misc technical data
Transmission Super intelligent 4 automatic
Drive type 2WD

Measurements
Dimensions (L x W x H) (4845 x 1830 x 1935)mm
Wheelbase 2,900mm
Min turning radius 5,800mm
Kerb weight 1,850kg
Fuel tank capacity 70L
Brakes
Brakes (Front) Ventilated discs
Brakes (Rear) Disc
Suspension
Suspension (Front) Strut coil spring
Suspension (Rear) Torsion beam coil spring


Toyota Estima 2.4 Aeras (A) specifications

Engine
Engine capacity 2,362 cchttp://forum.lowyat.net/index.php?act=Post&CODE=02&f=20&t=803752
Engine type 2AZ-FE 4 Cylinders DOHC with VVT-i
Compression ratio 9.6
Bore x Stroke (88.5 x 96.0) mm
Power 170 bhp
Torque 224 Nm
Performance
Acceleration unknown
Top Speed unknown
Fuel consumption 12.4 km\L
Misc technical data
Transmission Super CVT-i with sequential shift-matic
Drive type FF

Measurements
Dimensions (L x W x H) (4795 x 1800 x 1730)mm
Wheelbase 2,950mm
Min turning radius 5,700mm
Kerb weight 2,140kg
Fuel tank capacity 65L
Brakes
Brakes (Front) Disc
Brakes (Rear) Disc
Suspension
Suspension (Front) Macpherson strut type, Coil spring, Independent
Suspension (Rear) Torsion beam axle



This post has been edited by Enigma4646: Oct 19 2008, 12:55 AM

ha ha ha pray dont rain this afternoon.will update later.FC according to spec. 11km a liter ie 22 cent a km for a 2.4liter.why this Eastar is cheap bcoz China has 'copy it right '....even a grandis version I already saw in one of d china forum!

they did mentioned used tiptronic can get 11s maaaa...15s is using std auto gear ( spec in brochure )......faham meh???? i own one ...and i did tried .....can prove to below 10s if using oped pod air filter........

---

Added on October 19, 2008, 1:04 pm"There, sitting placidly under the hood, was a Mitsubishi-sourced 2.4l SOHC 4G64 engine – nothing like the workhorse 4G63 performer but still a monster when it came to torque. As an encore, it brings the car to 100km/h from standstill in only 11 seconds.

This was done with the automatic shifted into ‘tiptronic’ mode. The major limitation here was that there were only 4 speeds to play with, soaking up the ‘fun’ factor from the overall driving experience." quote from thr review

---

Added on October 19, 2008, 1:10 pmChery A1

---

Added on October 19, 2008, 1:38 pm

Chery A1 1.3 5dr (M) specifications

Engine
Engine capacity 1,297 cc
Engine type 4 cylinders inline, 16 valves, DOHC, EMPI
Compression ratio unknown
Bore x Stroke unknown
Power 82 bhp
Torque 114 Nm
Performance
Acceleration 16s (0-100kmh)
Top Speed 156kmh
Fuel consumption 16.6 km\L
Misc technical data
Transmission 5-speed manual
Drive type unknown

Measurements
Dimensions (L x W x H) (3700 x 1578 x 1527)mm
Wheelbase 2,390mm
Min turning radius 4,750mm
Kerb weight 1,040kg
Fuel tank capacity 43L
Brakes
Brakes (Front) Disc
Brakes (Rear) Drum
Suspension
Suspension (Front) Independent MacPherson struts with cylindrical coil springs, dual acting tube damper and anti-roll bar
Suspension (Rear) Semi-independent trailing arm type with cylindrical coil springs and dual acting tube damper


This post has been edited by Enigma4646: Oct 19 2008, 01:38 PM

If CKD sure cheap one.....not bad huh .....it was Italy 'claim' designer by Cherry ....price diff between CKD and CBU I think around RM 50K ........

To Dynasan ....sorry today Shah Alam ...rain heavily .......and lots of open houses .....the sticker purchased already at RM35 ......for a meter length.....perhaps tomorrow....I start my DIY.......just get back from Sepang ......Naza Ria pun 'Kena' .........he he.......at 22 cent a KM ......you only need RM 100 for a 450KM of journey .......driving speed 90-100KM/H .....

haimeh?.....just test the capability....

I sold my waja 2003 ( M ) at RM 26000 ....last month .....cash buyer .....with 3 kids and a maid u sure need an mpv....

To all Malaysians that are sceptical about chery MPV ....let it be.....for me and the rest of chery user ....we are happy with our choice.....as long as my family happy ....and my pocket also happy .....

At Kapar they trade in our std rim at RM 900 with tyre for a selected 18 inch rim ....gosh ......insane to change 18inch .....!!!! Hope they will design our bodykit soon.....lets pray ...

---

Added on October 20, 2008, 12:19 pmyes....China too good in " copy it right " !!!! but i like it .....

This post has been edited by Enigma4646: Oct 20 2008, 12:19 PM

What China did now...is too give us M'sian more choices and value for money vehicle...fake handbags / perfumes / watches / toys / all made in China .....but I'm happy .....They make it AFFORDABLE.......

---

Added on October 20, 2008, 12:31 pmat least the CD/MP3 player have an USB connection ......new Myvi facelift just include it recently ......next purchase to buy sun visor DVD player to distract the kids....he he

This post has been edited by Enigma4646: Oct 20 2008, 12:31 PM

got maid also BTW saw at kedai abang ...DVD sun visor left side come with 7 inch screen and DVD player ....can use 12V socket maa....only RM 290 ......plug and play .....if want cheaper ....go to Jln Pasar KL .....lots of choice ....or buy online thru lelong meh ......

18 inch too large ya........will think about it.........

??????

Ploton MPV is based on ????????

My Eastar MPV bring along 5 adults 2 kids and 1 toddler so far so good....I think we need to compare Apple to Copyright Apple laa.....he he.....

Ipsum 2.4 / Estima 2.4 / other MPV with 2.4 engine.........whatever it is .....we have more choices to choose what MPV suit our budget and family needs.......

tonite will start my 1st phase DIY .....

so far i haven't seen yet ....they now bz in roadshow.......i also waiting .....keep in touch .....

---

Added on October 21, 2008, 1:58 pm...last night DIY the sticker ......too bad...the std sticker glue not so reliable.....so tonite need to redo .....maybe add some gajah glue.....sighhhhh.....

---

Added on October 22, 2008, 9:53 amDIY ......the original sticker glue not strong .....gam cap gajah or double sided...tape...





This post has been edited by Enigma4646: Oct 22 2008, 09:53 AM

halo Kucau .....dont bikin kacau here hahhhhhh ...have you test drive PLOTONG MPV yet?????? sudah keluar ka????? ....

errrr do you know how to drive ???? what car / MPV do you have at the moment ???? dare to review????

you saw me???? waaaaa got fans oledi hah??? he he.....tak perasan la bos.....if on the way to klang ....I'm just come back from buying sun visor DVD from kedai abang ..........I'm on MC since in the morning I had a bike accident......my bike slide cause of the sand.........gosh......there's goes my knees and palm.......lucky no cars behind me.......huyoooooo.......got 2 days MC....tomorrow....go to clinic again ....cuci luka.......sure sakit meh........

---

Added on October 22, 2008, 8:29 pmtinted already ......shah alam ....all except front ....a bit of black tinted in front to cover tha dashboard from sun .....also buy a nonslip mat at RM 35 and cut it accordingly ......the last two glass I tinted black .....rear and the rest normal tinted....sure JPJ no kacau ......if not leceh ......

if you go for tinted....the accessory guys sure will break your door panel clips......sure one....but dont worry they will replace them......and pls dont ask them to measure and cut the film on your glass......mine already scratch to their negligence....thats why i ask them discount ......nak marah pun tak guna ......

please choose a professioanl tinted master......next time i can open the door panel myself....so easy .....

first I learn ....then I DIY ....same as I install myself tonite my sun visor 7inch DVD ......senang meh.........

on your booking and car.....have to q ???? i think ....lots of people already booked this chery la.......nasib baik I dapat dah .......tomorrow might go for allignment ...........

hope you get you chery fast man......so you got the real xperience......

This post has been edited by Enigma4646: Oct 22 2008, 08:29 PM