3dmark06 with 9600gt @ 700/1750/1000 mhz & e5200 proc @ 3.4ghz
resolution : 1024x768

sry.. the info in the pic is kind of blocked but u can see that the proc is at 3.4ghz and its 9600gt..
i took this screenshot weeks ago and now i cant run 3dmark cuz i tried to reapply thermal paste and found out its finished after rubbing off the old layer
gotto buy new thermal paste >_>



cpu score b4 oc'ed is around 2.4k or less if i recall correctly..
*at 1024x768*

This post has been edited by Sprinz: Oct 17 2008, 11:51 AM

Owh..very nice score la...thnks.but i want to ask if i only use stock cooler to oc how much GHZ can get.3.0ghz can?

i was using stock cooler to get 3.4ghz stable..

check my post at page6.. (4th one)

..but i think my 13k 3dmark score is mainly due to my graphic card, since my bro with proc that performs almost same as mine get around 4k marks with 8500gt..

This post has been edited by Sprinz: Oct 17 2008, 12:45 PM

The CPU is 2.5Ghz right? But Vista is showing 1.9Ghz. I tried to set the multiply in BIOS (G31 mobo) but the max is 12X200Mhz = 2.4Ghz. Any thought?

Wah..This E5200 very good ma....3.4GHz using stock cooler...Haiya manyak Syok wo....
thnk for your info...sure i will buy this baby soon..yeah

not all e5200 can do 3.4 at stock voltage....u must be very2 lucky to get one....most of them can do above 3Ghz with just abit bump on voltage..

GTG

okeh..3.0Ghz above .. ok le tu... mybe mobo also affect oc...

i highly doubt its ur GC...

coz i have an E8400 (stock) + Zotac 9800GT Amp! in the office and if im not mistaken im getting around 12+

besides.... 3dmark06 is VERY CPU dependant... so its ur CPU thats seriously boosting up ur score.

This post has been edited by mADmAN: Oct 17 2008, 06:49 PM

[quote=diadokmai,Oct 16 2008, 03:10 PM]
krizalid88.wat about the cpu 3dmark06 score?before oc and after oc..



my cpu score when oc:

[attachmentid=633799]

This post has been edited by krizalid88: Oct 17 2008, 10:13 PM

wtf???my e3110 3.6ghz + 9600gt 12xxx oni u get 13xxx hwt happen

Look at his resolution, its 1024x768, resolution does affect the bench as well. I doubt u use higher resolution thats why get 12k.

haiyaaaaaaaaaaaaaaaaaaaaa.......missed the resolution part...

change settings for wat??? leave it at stock settings then test la....like that then only u can properly compare with other people....

3dm06 is 1280*1024 on stock settings if i remember correctly....

yes it is 1280x1024 if u didnt touch anything from it, if reduced resolution sure can shoot higher, so best way dont change setting if not u hard to compare the results with other.

check ur EIST or C1E settings in the bios..its the kind of the intel seepdstep techology..reduces multiplier when idling and uses all multiplier at load...

or maybe try update mobo firmware ..
since my e5200 set its multiplier to 6 and that's like 1.2ghz when speedstepping..
just my 2cents...

btw.. i only get 11390pt when using default resolution..
my old ss used 1024x768 because i using old 4:3 crt monitor
and removed my stock thermal paste so cant run 3dmark at 1280x1024..
therefore i just posted my old 3dmarks screenshot..
sorry for confusion caused..
now using tuniq tx-2 and reduced the temp by like 5c when full load..



This post has been edited by Sprinz: Oct 18 2008, 05:19 PM

excuse me, i wan to ask a question

X2 3800+ compare with E5200 which 1 gives better performance?

This post has been edited by noos: Oct 18 2008, 09:50 PM

Thank for ur info bro...


GO for E5200, X2 3800+ only can score 1400+- compare to E5200 can got 2400+- in 3dmarks06 under normal frequency. If Overcloak E5200 still the winner.coz E5200 can oc more than X2 3800. E5200 is means to fight X2 5000+ and above AMD model. X2 3800 only can compare to E2160.

E5200
X2 3800

This post has been edited by diadokmai: Oct 19 2008, 02:24 AM

heres my achievement, manage to get it running at 3.6Ghz@ 1.31v stable using stock cooler. i think if i tune the GTL and etc.. i can get lower voltage but didnt have time to do that

Nice oc there..
i hv question..u change buss speed and cpu voltage in bios? or use software? i'm not very good in oc..before this i only change the buss speed in bios..to oc..voltage not change...

This post has been edited by diadokmai: Oct 19 2008, 02:19 AM

yup i only change the fsb and voltage in the bios. dont really like to use software to oc my computer but ppl say DFI ABS system is quite good. Will try it if have some free time