Ha...I dun think AMD got vNB.
It depends. What not enuf add what lo

-pWs-

bump a little vdimm.. and try to push HTT after u change to 2T

what -pWs- try to said.. trial and error

This post has been edited by xixo_12: Oct 1 2008, 06:59 PM

eh AMD don't have ke?ok

up vdimm eh.ok.

it's just that this KN9S mobo is a bit pain in the ass. sometimes i reset the cmos jumper, take out the cmos battery oso this thing dont want to reset the BIOS

---

Added on October 1, 2008, 7:11 pmanyway, what's the use of MCP55P voltage and HyperTransport voltage?

This post has been edited by cloudstrife07: Oct 1 2008, 07:11 PM

Guys..i dont know why my CBID so Kanasai..Report very high Wattage
It states 134760.09W
May i know what version of CBID u guys using?
And..why my CNQ doesnt works with my Abit AX78?

maybe is u using 64bit vista
bois hv enable CnQ and control panel there the power option hv to select balance or save enery

This post has been edited by digswell: Oct 1 2008, 07:54 PM

btw what's the max safe voltage for KVR RAMs and Windsor procs?

There are no safe voltage..Every increament are danger
Usually KVR Rams 2.1V Max
Windsor..1.57VCore is max safe voltage(DEPENDS ON COOLING AND NOT RECOMENDED FOR 24/7).However,since u are using Stock Cooler..1.4V is the safest for you..

thanks buddy

my target now is 2.6Ghz. let see if i'm able to go that far using stock cooler.

update: unable to go more than 255Mhz HTT. pumped vcore up to 1.350 and vDIMM up to 1.95 also cannot boot. perhaps it's my proc limiting me

now primetesting @2.54Ghz in windows (2.55Ghz in BIOS).

This post has been edited by cloudstrife07: Oct 1 2008, 08:21 PM

2.2v for me, i used to run a pair of d9dcl w/ 2.2v for 24/7 naked passively. for chip it'll depend on ya load temp. as long as < 60'c, i'm fine w/ that.

ram changed to 2t still can't boot? which slot u put ya ram? try to put in diff slots mite help.

this is interesting. i've never heard putting RAM in diff slots helped OC

will try it later after i succeeded in hyperPi 32M

bro...we have the same mobo here..

i`m using KN9S to..

i can OC my F2 38 to 2.8Ghz stable..

of course the Vcore is 1.45V and the KVR is 2.2V@5-5-5-15,935Mhz

WTF!

http://www.insidehw.com/Reviews/CPU/AMD-Ph...ck-Edition.html

3.2Ghz at only 1.325V!
Although it goes on a voltage spree after that, wow. Performance of a quad core with better performance in games.

I said it was worth it, and here it is.

ain't that a bit dangerous?2.2V on KVR?

and also, u got red scorpion mah, me stock cooler only

maybe i should follow the settings you put on your siggy

yup..it`s a bit dangerous..but i put cap ayam heat spreadder on it...

if u OC with stock Vcore..u use the stock cooler like i did dulu...

the result may be different...so good luck...

btw...i dun always OC...i juz OC to benchies..

how much can u push using the stock cooler?

mind telling me your vcore, vdimm and ram timing as well?maybe i can make that as reference

Budak blue camp nih

That is bug bro. I also having that value last time.

Nothing is safe.
Want overclock then bear the risk.

Yea...put the the slot near CPU socket.

-pWs-

ala, blue camp zaman P4 dulu..now all those dualcore tricore quadcore octocore korkor mana ada camping dah. i'll go whenever my money takes me

i am putting the RAM at the slot nearest to the CPU.maybe this board needs to put the farthest from the CPU?

You can hav a try.
But for me, ram slotted near to CPU yields better result.

-pWs-

ahkhoo, that guy over at xs did 9850 b.e 3.6 on sb600!

3.5 on air?!

possible?

i think wc la , if i'm not mistaken to understand any sentences..