Nope,there's no Phenom X2,its a Athlon re-branded based on K10 architechture.
Its called GE with L3 Cache.Its basically Athlon X2 4600 with L3 Caches

= =
Cannot said all tiru later gg.
same lor like QPI tiru HTT
I hope,the Deneb will really suprises the Intel just like the HD 4000 Series Does..If its beat penryn its more than enough already..

AM3 mobo too ex..DDR3? T_T
Btw,Nehalem(Bloomfield) is an extreme edition,thus not right to compare with Deneb.But who knows..Furthermore,The bloomfield is somehow slower than Penryn in some games..still..

I guess no?You mean like Button at the I/O?
Dunky..if possible wait till Deneb out la..much worth

Oh that way ah,i think Abit also has this function.But i think all motherboard should have other Reset-CMOS Proceedure.We can also discharge the mobo by pulling the power cord and press the Power?Forgot edy - -

Wah..i love the AMD LOGO!!
Biostar only 690G has AMD Logo

I thought all AM2+ motherboard supports Deneb?
Just that we may be limited some of processor functions such as new saving features..etc?

Move back to AMD la once Deneb come out.If Deneb end up faster folding than your proc,will you join us back?

Yeah..Asus much more clearer..But i seriously like the AMD logo ..

Wah..Dont send shop so fast..= =
Check around the mobo whether there any crash/calar.
If no try reset CMOS..

Not a bad results there..Later will find my HTT Wall ..Waiting Dl finish

I got a roughly prices for Deneb systems(not all)..

evryone's bashing about buyin new 790x mobo eh.. i dun know when will i be able to buy new hardware... deneb+790x+hd4000 is a good buy eh.. how much u guys expect it will be?

As AMD Said their chips will be below $225

Deneb : Ranging from RM550~RM800
790GX : Ranging from RM 350~RM 1000(790FX).
HD 4850 : RM 500?450?

You should tell us more detailed.Whats your Spec?

Try push more..Not a bad results there

Get PCIE GC..Because IINM onboard GC limit the OC-capabilities..

No wonder..6000 Processor dont expect to push high..
bro pWs this is his problems

"Im ocing in AX78,
whenever i OC my cpu FSB to more than 220,
the bios will stuck at startup page and tell me to set the clock lower at Sofmenu. Is tht anythg i can do abt it?
all voltage is setting at their default value..
the cpu voltage default is 1.4V...
i hav to increase more?
i OCing with increase FSB, lower Multiplier, and then set HT multiplier to 4
did i miss some other setting?
and if i hav to increase vcore and vdimm voltage, how much shud i increase it? thank you"

Tell us your settings..

Example

230HTTX10
1.45VCore
1.9VDIMM
5-5-5-16-21 2T
..etc

Xixo..change your siggy..its V10 not V9 lehz
onimusha..tell us ur settings..

V1 is much more overclockable..Thou 4600 F3 requires 1.25V to stable@3.1 IINM..forgot edy

WHats diff with one sided and double sided?