@cloudstrife07
at Advanced Chipset Features
option name HT Frequency
or see ur manual book at page 3-8

This post has been edited by digswell: Oct 1 2008, 12:02 AM

yup, d ht multiplier could be referrin to k8<->mcp55 ht speed.

oh thanks guys

now im at 2.5Ghz already



This post has been edited by cloudstrife07: Oct 1 2008, 12:59 AM

is it prime stable? if yes u mite go as far as 2.7~2.8GHz w/ higher volt. put command rate to 2t & ramp up d frequency of ya ram...

priming right now. it's just that i felt so excited that i post the CPU-Z screeny 1st

higher vcore?i wish i can do that though. on stock cooler now and the RAMs are Kingston ValueRAM

btw which is better for stability test?OCCT or prime95?

This post has been edited by cloudstrife07: Oct 1 2008, 01:08 AM

well, if coolin is limitin u then try to bring down d volt needed by doin burn in, it helps sometimes.

i believe even ddr667 kvr is capable of 800 @ 5-5-5-x w/ 1.9~2.1v.

prime 95 is d toughest test for amd imo... i can run occt pass but prime failed within an hour.

ic..so prime95 is the toughest for AMD while OCCT is for intel Intel Burn Test is for Intel

1.9~2.1v eh..i tried playing around with the setting just now to get 2.6Ghz.but it seems the BIOS failed to boot. tried to up vcore oso no use. issit because of the RAM voltage not enough?

now back to 2.54Ghz. doing priming.

This post has been edited by cloudstrife07: Oct 1 2008, 03:10 AM

Hi guys and girls,

anyone tried the Sempron X2 2100?

I heard that its stock vcore can hit 3ghz

it brisbane chip.. so no wonder can hit 3ghz.. somemore could need a little bump of voltage

How about the performance?

Peformance maybe not much diff cos just 512KB L2 Cache..

But it is dam cheap lol, new one not over RM 145..

HOLD ON...
RM 120?
Whats the stock clock?
AMD are cutting the price LIKE HELL
RM 1000 is enough to build AMD systems..

What to do?
AMD have to cut price to fight w Blue Camp the other side

-pWs-

Clearing stock and discontinued production. sempron can 1st b4 athlon

amd seem like focusing more into energy saving sector.. like HTPC setup..
that only their target

AMD focusing on Mainstream..Then only Highend.Btw
Next year,no more Single core for AMD..Its AMD Phenom X2?Stripped Phenom X2(Maybe with 512 L2 Cache?)
IINM..

This post has been edited by AMDAthlon: Oct 1 2008, 04:01 PM

i'm also into energy savin... d increment of ~22% on electricity bill has forced me to be more environmental friendly...

that's why my 5600+ need to go... runnin my 3500+ @ stock w/ 35W now...

this is true call saving
[attachmentid=612572]

I always run it CnQ enable with setting 250 x11 , current power is bout 25W