hummm, will big heatsinks(like CCF/Iceblade/killer whale) cause motherboard to *abit* break apart in the future? Since the hsf is heavy..?

sry need to ask. what the best for phenom x4 9950 be?

If your casing is there all the while I think no problem, but if you always bring your casing all around (and handles it a little rough) well not so sure about that.

Got screws ma.. u r pikacu, board belum break u already gatal to upgrade .

---

Added on January 28, 2009, 3:51 amPersonal choice, CCF and TRUE.

This post has been edited by chyu89: Jan 28 2009, 03:51 AM

Using Killerwhale. Not really heavy. Manufacturers do consider the overall weight when designing the HSF.

ifx-14 + 2x fm 123=above 1kg edy i think

want to join..

here is mine :

kolong / ice blade pro / tuniq tx-2 / intel c2d e7200 @ 3.8Ghz (cpu oc : 52.61%) / 1.37@ bios : 1.368@cpu-z / ice blade stock fan / 25c / 50c / non-aircond / dual orthos on blend

haha damn u niggaaaa

i think ill try to use CCF , and see how it will perform on my current mobo

hi guys
need an advise

my specs :

E8400 EO stepping
Biostar T Power I45
Power Color PCS + HD4870 1GB
4GB CellShock 1066 2,3V Micron
Seagate 750GB 32MB NCQ
ToPower PowerBird 1100W
Recom PowerStation with 5 fans

so one thing i am missing at this point is a good cpu cooler to start adventure with overclocking my system, can buy in 2 days one of these :

ARCTIC COOLING Freezer XTREME 72USD
Asus Lion Square 70USD
Magicool Liquid Cooling 100USD
Scythe Mugen 70USD
Rosewill RCX-Z5-Ultra 92mm x 2 Two Ball 81USD

thinking about purchasing Mugen, but its kind of huge thing and that's what makes me feel not quite comfortable, don't know why

so any advise will be very helpfull for me

thanx

Those r not really 1 of the heaviest kind though

Cooler master V10 previewed....peltier assisted air cooler

rumoured to be launched around february



here is the pictar bomb to torture ur screamyx









BBQ: http://www.tweaktown.com/articles/1717/1/e...sink/index.html

too big,how to install it ?
more big more good ?
haha
btw the design cool~

peltier in malaysiaa?
ive tried coolit before
damn those condensation
the weather is too humid here

a guide on how to lapped a Core I7 proc................

http://www.atomicmpc.com.au/Feature/135165...-lapping.aspx/3


some guys are just nuts.

Review


now where can i get this in Malaysia.

Is it really necessary ar? Normally i just go hardware get some 火酒 .

Dunno what it called in english, Pour and wipe.

Haha, Kerosene? petrol? alcohol? I just use alcohol

Smells like alcohol. Not kerosene not petrol

beer? wine? lolwut!

pakai minyak cap kapak oso can la...

zippo pun bley

i think you meant lighter fluid/zippo oil ler...

anyways..speaking of replacing brackets for CCF...i dunno will it work for CCF but i did some modding on my AC freezer7pro recently..
i bought the xigmatek spring & screw thingie with the bracket (RM35)...pull out the washers from the screw to separate it from the bracket it came with...
and then...cut the plastic snap-on pins on my freezer and replace them the xigmatek spring and screw thingie with the bracket...
works fine after that ... got about 2-4 degrees drop in temps...and felt a little secure that my mobo wouldn't break anytime with the bracket..

this is the product i used ::Xigmatek Crossbow??