Acson warranty claim not efficient as york, i prefer you go with York much better customer service..

ok you got your reason... too, i love my inverter for save the noise issue...

Not cheated you, I'm the user for what I usage everyday.

Quitter is one thing off what you paid as worth for money and enjoy it every night.

Current I own hitachi DC inverter for Others Room indoor air flaw noise really worst than Mitsubishi Electric StarMex inverter for my Living hall and masterbed room.

Hitachi Noisy at low speed still can near the air flaw noise.
Starmex got quiet mode at 19db only. For low speed at 21db that's can't hear any noise at all.

This one ahh... You got screw driver and open up the casing and clean out all the water drain for jelly thing.

Also use and same size of strew slot in on indoor drain pipe and use mouth to blow with air mixed with water too.

Can be blow out as many dust & jelly until the water running smoothly with not stuck at all, then put back the while casing with screw back that so..

Even silent mode also can't flight. The air flaw noise can be killing my ear.. Lol
What ever installed already just face to usage until spoiled and change into Mitsubishi electric starmex

No worried,, that claim from my Aircond contractor.
Cause due to vibrator until the sliding door got sound..lol
Cause I'm lucky to chosen inverter type.

This post has been edited by kimsim: Oct 13 2013, 11:15 PM

I knew that, cause my 1st aircond is non inverter mah, panasonic, hitachi & York from Singapore of split unit, in 1 outdoor inside got 2 compressor.

Daikin ah.. nothing special.. don't easy clean model..

even buy york inverter also enjoy the same cooling..

from what i knew on daikin R22 pre model is using AC inverter..

that's why i go with hitachi & Mitsubishi electric.. even my friend in singapore is aircond contractor he also said Daikin ah... you want the brand and not want do more repair works.

This post has been edited by kimsim: Oct 14 2013, 12:17 AM

Hmm I Guess daikin already running R410a model like Singapore now.. Baru energy saving

R22 really older already.

How bout price for daikin R410a vs R22 in 1hp now?
For last time I asked is more expansive then Starmex inverter

Claim from my friend he own now, not even cold at 25 degree, he almost use at 22degre for smaller room size.

22 vs 25-27 degree on R410a which one can save more?

Double

This post has been edited by kimsim: Oct 14 2013, 12:45 PM

Most of inverter brand is variable fan & compressor speed of outside temperature self adjust speed.

That's outdoor cut off an indoor still few is cold without become warm.

This post has been edited by kimsim: Oct 14 2013, 12:44 PM

Just avoid to buy Panasonic only,
Even York still cheaper.

Mine both hitachi & Mitsubishi already running near to 4 yrs Liao

So far so good still keep the same cooling.
Just got one of hitachi unit wire cable failed.
Due to DC current is quite sensitive, even the power wire no broken but can't switch on, after change wire can function all.

I guess u go for 1.8hp for starmex now, due to cutting cost for fancoil become a smaller size as 1.0hp now.
Cooling wise may take longer a bit to compare as 1.8hp.

For 15ft x 15ft = 4.5x4.5m x 3.2m high is very common area, for what I can suggest, go for Starmex inverters to be save time and quick cooling for set at 25 degree only.
Fan speed at low already good than enough.

Cause for my living hall + dinner area is open until kitchen area.
For my Starmex 2.5hp inverter only set at 25-26 in low fan at afternoon sun.

This post has been edited by kimsim: Oct 14 2013, 07:18 PM

All BTU and specs can find here :
http://www.coolserve.com.sg/htmdocs/coolAd...visor.aspx?id=9

But Panasonic got 1.75hp right, If I not wrong

This post has been edited by kimsim: Oct 14 2013, 08:03 PM

Got 18k btu = 2hp...lol

wanna get more cooling and saving more, just go with Starmex inverter guaranty you set in 25-26 degree good enough, even place outside of window still quiet in working.. easy clean and bigger condenser can keep more faster cooling time..

Cause you never appreciate with inverter Aircon.

Unless I recommended with daikin brand then you have no comments right

This post has been edited by kimsim: Oct 15 2013, 10:15 AM

Same my history here...
Why i didn't chosen on Daikin? due to malaysia daikin too slow marketing in passed 3 yrs... still ruining R22 inverter at that time..

Even you wanna buy from R410A for inverter for 1hp in many air cond shop they quote me on 1hp at Rm1750 without installed, also waiting 1-2 months delivery from thailand or singapore.

So end up to decided mitsubishi starmex inverter never regretted so far..

Daikin got eye sensor to detect human in place, but expansive parts.
Panasonic inverter all made in china, but not durable, from some shop they recommend to add extra warranty for PCB, also smaller size of outdoor condenser.
Hitachi since is old brand also done in good job in non-inverter for higher BTU at 10k and come with silent mode, but today all DC inverter an not silent/quiet mode at all, even use on quiet mode you can feel not enough cooling all the area..
Mitsubishi Starmex since is most popular in Singapore for 1-3/1-4 split... end out decided to Starmex had not regret..