Membrane filters with 0.01 micron like NESH wont filter off chlorine.

APDWS1000 is dual stage carbon block filter with thicker and better quality carbon block compared to AP Easy complete. It would b better if you can drop by my showroom as we are having promo til 30 Aug and it would b easier to explain with the actual product infront of us.

Pls join my facebook for more info
http://www.facebook.com/builders.hardware?sk=info

This post has been edited by zheilwane: Sep 12 2012, 08:02 AM

This is how good 3M APDWS 1000 compared to regular activated carbon filters.

For those who doesnt wan to install 3M indoor water filter undersink, you can also install it like this



This post has been edited by zheilwane: Sep 26 2012, 08:53 AM

well, there were two forumers who PM me asking for a table top unit, so i jus posted this photo to share with other members

This post has been edited by zheilwane: Sep 26 2012, 04:32 PM

Just connect to show forumers that it could b done. Ofcoz, it would look nicer if it is installed properly. I m using my existing tubes to connect, didnt wan to cut as it will b a waste.

Ofcoz, installing it under sink is the best and save space.

U should drop by my showroom to have a look and select the items instead

You can install 3M AP902 outdoor filter but you need to double check with management whether they allow you to install or not.

Here is the reply from 3M US engineering team

Carbon Block used in APDWS1000 is acid washed wood based carbon. The acid is used to help clear the pores of ash during the activation process. The initial draw of water with a silky/soapy consistency might have an elevated pH due to the alkaline cleanser used to neutralize the acid residual.

---

Added on October 18, 2012, 6:43 amAnother thing to add on, some forumers saw the word soapy, they thought it is like soap. FYI, the water is smooth/silky initially due to alkaline as explained by 3M and it is safe to drink. Just need to flush approximately 10 min before using

This post has been edited by zheilwane: Oct 18 2012, 06:45 AM

For that price u can get 3M AP902 Outdoor filter + 3M APDWS1000 indoor drinking filter (Less than RM 2k) as per my signature below, free delivery within Peninsular Malaysia. AP902 outdoor has very good flowrate of max 75 litres per minute, while regular sand or membrane filters are less than 40 litres per minute. So, you might not need to get an extra pump to boost the direct water supply.

3M filters are certified by NSF and it is fully imported from USA.

This post has been edited by zheilwane: Nov 1 2012, 08:31 AM

The alkaline will eventually got flushed out, i wont b like that all the time. Once all the alkaline has been flushed out, it wont b silky anymore. Btw, it is also to safe to drink alkaline water.

Got the link to say COway bankrupt?

Btw, not all filters with NSF are good. YOu will need to check which NSF standards that they meet. Some filters have NSF but for material only and not the water quality

U should have strong pressure unless it is an old condo. 3M outdoor filter has the best flow rate compared to other products

If you are going to purchase a filter tap for drinking purpose, better check twice before buying. Some filter taps are brass while some stainless steel taps are not 304 grade or the cartridge used is made of brass.

3M undersink filter APDWS1000 comes with filter tap which was also sent to NSF for testing. So, you can be ensured that water going through the filter tap wont b contaminated.

My mandarin is not that good but i think i heard the conclusion saying that alkaline water is good for health is jus a gimmick and not 100% true. I read it online and also it was mentioned in the video that our body will automatically adjust the PH level. So, if u drink alkaline water, it wont affect our body's PH level. I like what the last person said, "water is H2O, what esle can it be"

---

Added on December 9, 2012, 11:28 pmYOu can try Apply Cider Vinegar or u need to get some skin care product to treat ur acne.
http://www.youtube.com/watch?v=DCKRBEq5p_E

Btw, get the brand BRAGG it is available in Guardian but the smell is very strong. I tried it once

This post has been edited by zheilwane: Dec 9 2012, 11:28 PM

Most membrane filters like Hydro1 are about the same, 0.01 micron filtration and optional automatic flushing. Most membrane filters will claim that they are durable, would not reduce water pressure and etc but in fact most membrane filters could not withstand high pressure and is quite fragile. No doubt filtration wise, membrane is the best but due to the super fine filtration of 0.01 micron, it will reduce water pressure a lot. The question is, is 0.01 micron filtration required for washing clothes, showering and etc? With the fine filtration, filters get clogged easily and require regular flushing (everyday). Here is a demo of it



This post has been edited by zheilwane: Mar 26 2013, 09:29 PM

yup no problem but i would recommend to put the tap on the right side instead. You don need filter water for garden, then the filter can last longer

Should b ard RM 250-300. However, we only provide installation for our customers as we dont really make profit from installation.

you can install it like this

Check for certificates like NSF