my rig got a rare prob.. sometime blue screen appear & auto restart..
& sometime when i play dota the screen hang for 1-2 sec & got 'eeeek..' sound come out..
how to fix it ??

This post has been edited by cwk88: Aug 26 2008, 03:59 PM

try to reset ur cmos back.. n start oc back from beginning.. or u can try to investigate one by one..

DFI fans
It kinda expensive for GayGayByte

-pWs-

my setting is normal no oc

What PSU you use?

-pWs-

cheap 1.. power logic 450w true power ..
1 years old dy

yup, dfi fans boy here...

d price for gaygaybyte is way outta budget, on newegg they're sellin it quite cheap thou... inflation has reach its limit in singapore...

owh my bad.. i thought u oc..
check from supply.. mite sumting wrong there

the prob is rarely appear.. i think 2 time from the day i bought proc, ram & mobo (1week+ ago)

u shud pinjam from ur frenz n try it.. maybe this is the prob
emm too many superb hardware with ur ATI card

This post has been edited by xixo_12: Aug 26 2008, 04:20 PM

i will try oc after the prob solve

*waiting 4670 release (10 sept) =)

change ur psu lor.. wanna oc with ur cap ayam psu?

aiyoyoyo i already give up ( just a few days ) ocing my rig... even i applied CM ramsink on the mofset still heard some wierd sound area mofset that mean not stable for the system ...i think my rig already full of fan including wall fan lol ...y arr when applied the vcore around 1.5v and oc to 31xx the system must not pass the orthos even i lose the ram timing and HT link... huhuhu..my cpu temp on 15min of orthos r below 60c..here my last setup :

AM2 5200 Windsor F3 89W
Biostar TA770 A2+ (A78XA328.SPX Bios)
Corsair DHX PC6400C4 rev 1.2 1GBx2 kit

FSB 285 x 11 (cpu multiplier) | Vcore increased +0.125 to +0.150 from 1.35v
DDR 800 (ratio) 5-5-5-18-23 2T 2.1v (ram already run memtest 3.4 stable)
HT Link i put 600
HT volt i put 1.300v | NB i put 1.9v (correct me if iam wrong)

is it my proc already reached the limit??
or my mobo cannot handle the proc wattage on oc? thx!

yeah, long time no see..quite bz with final year project currently, but still got time to hunt for a decent board

right now, TA780 is my absolute choice..but since the 790GX might be released soon, im thinking its better to wait for it

how bout usin lower ram divider? it could be psu juice not enuf if there's hisslin sound from mobo/psu. from my experience of oc'in am2 on 770 chipset board, u just need to play w/ cpu-nb voltage, vcore & vdimm. mebe u can pass me ya chip to play around b4 i change to 790gx board...

HT and ND voltage is edy too high

HT voltage should be set 1.25(stock) or 1.275
NB voltage should be set 1.5 (stock) or 1.7

did u lock up the option at bios CPU-VID to 1.35 ??

I got the same issue with my TA770 previously. Hissing like madness
But for me only way that will happen is when i oc my gc...

i think the hissing sound are cause by the nb or sb voltages.. last time i OC and add the nb and sb voltages, it alway make the hissing sound...

Anybody use 790gx board? No one buy yet?

I think there will be a user to buy..But its not reaching here yet.
By the way,u bought ur rig le?

CPU-VID sadly no avail for AX78