Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
100 Pages « < 83 84 85 86 87 > » Bottom

Outline · [ Standard ] · Linear+

 AMD® Socket-AM2&AM2+ Overclocking Thread V9, ~The Art Of OverClocking Continue~

views
     
fatalynx05
post Aug 27 2008, 07:53 AM

Fatalist
****
Senior Member
667 posts

Joined: Jan 2005
From: Johor Bahru
QUOTE(ah_khoo @ Aug 26 2008, 05:56 PM)
how bout usin lower ram divider? it could be psu juice not enuf if there's hisslin sound from mobo/psu. from my experience of oc'in am2 on 770 chipset board, u just need to play w/ cpu-nb voltage, vcore & vdimm. mebe u can pass me ya chip to play around b4 i change to 790gx board...  tongue.gif
*
i tried already bro...DDR800 ratio more stable to oc thumbup.gif

QUOTE(digswell @ Aug 26 2008, 07:52 PM)
HT and ND voltage is edy too high
HT voltage should be set 1.25(stock) or 1.275
NB voltage should be set 1.5 (stock) or 1.7
i tried already from stock till 1.3v tongue.gif  still cannot

did u lock up the option at bios CPU-VID to 1.35 ??
*
yup done already notworthy.gif

QUOTE(cyloh @ Aug 26 2008, 09:33 PM)
I got the same issue with my TA770 previously. Hissing like madness  doh.gif
But for me only way that will happen is when i oc my gc...  rclxub.gif
*
QUOTE(casperito @ Aug 26 2008, 09:49 PM)
i think the hissing sound are cause by the nb or sb voltages.. last time i OC and add the nb and sb voltages, it alway make the hissing sound...
*
yahhh...u r rite casperito..mine when i add vcore or oc exceed 3.1xx that sound will come out cry.gif when i fail on orthos the sound a more worse! rclxub.gif like got bug inside my rig lol laugh.gif is it really my psu fault? i use CM Extreme power 460W the device on my rig r : CPU | Mobo | 2 stick ram | 1 DVD-RW drive | 3 Led 120mm fan | 1 Aux Fan | 8800GT gc only...i done do the wattage calculation only use 315W tongue.gif

*btw can any1 recommend me what mobo r around rm300 that good to oc aye? whistling.gif thx...

This post has been edited by fatalynx05: Aug 27 2008, 08:06 AM
TSxixo_12
post Aug 27 2008, 08:21 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
2nd hand 790GX laugh.gif
ah_khoo
post Aug 27 2008, 08:57 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(imsmiko @ Aug 26 2008, 11:48 PM)
Anybody use 790gx board? No one buy yet?
*
d price here in sgp is really steep mate... i'm thinkin twice upgradin now coz d price tag gonna cause decent damage to my wallet... sweat.gif

QUOTE(AMDAthlon @ Aug 27 2008, 06:30 AM)
I think there will be a user to buy..But its not reaching here yet.
By the way,u bought ur rig le?

CPU-VID sadly no avail for AX78 doh.gif
*
why u need cpu-vid while u got no problem increasin vcore on this board bro... blink.gif

QUOTE(fatalynx05 @ Aug 27 2008, 07:53 AM)
i tried already bro...DDR800 ratio more stable to oc thumbup.gif
yup done already notworthy.gif
yahhh...u r rite casperito..mine when i add vcore or oc exceed 3.1xx that sound will come out  cry.gif when i fail on orthos the sound a more worse! rclxub.gif like got bug inside my rig lol laugh.gif is it really my psu fault? i use CM Extreme power 460W the device on my rig r  : CPU | Mobo | 2 stick ram | 1 DVD-RW drive | 3 Led 120mm fan | 1 Aux Fan | 8800GT gc only...i done do the wattage calculation only use 315W  tongue.gif

*btw can any1 recommend me what mobo r around rm300 that good to oc aye? whistling.gif  thx...
*
d answer is my abit ax78... tongue.gif
8tvt
post Aug 27 2008, 09:14 AM

Peace Lover
*******
Senior Member
8,753 posts

Joined: Jan 2003
QUOTE(ah_khoo @ Aug 27 2008, 08:57 AM)
why u need cpu-vid while u got no problem increasin vcore on this board bro...  blink.gif
to undervolt -

d answer is my abit ax78...  tongue.gif
bias  laugh.gif
*
ah_khoo
post Aug 27 2008, 09:29 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
undervolt? yeah, that's what i ask for in abit forum, d answer i got was... we are overclockers, so we don't need d undervolt option... sweat.gif

at least ax78 got no hissin sound when voltages are high, it overclocks x2 & phenoms pretty well too... flex.gif

This post has been edited by ah_khoo: Aug 27 2008, 09:33 AM
TSxixo_12
post Aug 27 2008, 09:55 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
all guys so kaya, can pay for high electrity.. laugh.gif
8tvt
post Aug 27 2008, 10:03 AM

Peace Lover
*******
Senior Member
8,753 posts

Joined: Jan 2003
QUOTE(ah_khoo @ Aug 27 2008, 09:29 AM)
undervolt? yeah, that's what i ask for in abit forum, d answer i got was... we are overclockers, so we don't need d undervolt option...  sweat.gif

at least ax78 got no hissin sound when voltages are high, it overclocks x2 & phenoms pretty well too...  flex.gif
*
so that board solely for oc? if atleast got that option not hurt much i think..
last time my TA690G also don't have.. after few updates got that option..

but i do really think the CPU-VID is needed since sometimes default value that been set by mobo is not correct..
some cpu got lower/higher default vcore..
so adjusting correct voltage is also the art of the OC..
OC not just pump high vcore.. surely who answer that too bolt..
ah_khoo
post Aug 27 2008, 10:09 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(xixo_12 @ Aug 27 2008, 09:55 AM)
all guys so kaya, can pay for high electrity.. laugh.gif
*
not reach, but for d sake of contributin to this thread mah... tongue.gif

QUOTE(8tvt @ Aug 27 2008, 10:03 AM)
so that board solely for oc? if atleast got that option not hurt much i think..
last time my TA690G also don't have.. after few updates got that option..

but i do really think the CPU-VID is needed since sometimes default value that been set by mobo is not correct..
some cpu got lower/higher default vcore..
so adjusting correct voltage is also the art of the OC..
OC not just pump high vcore.. surely who answer that too bolt..
*
tweakin/fine tunin is d most enjoyin/challengin part of oc... nod.gif
digswell
post Aug 27 2008, 10:33 AM

Look at all my stars!!
*******
Senior Member
2,484 posts

Joined: Nov 2007
From: Nilai,N.S.D.K
Who can tell ...x2 3800 F3 the real stock vcore is it ??

From my 4200 F2 65W , vocre is 1.2v to 1.25 so wat is the real vcore
i found da if i dont lock the CPU-VID....if i oc with vcore +0.05. so u really think the vcore is 1.3 ?? wrong it droping to 1.27 or 1.28
the vcore at load is 1.3 (sometime will at 1.29) and idle at 1.27v

the CPU-VID is to lock the CPU vcore
after it lock at 1.25 ....if oc +0.05...the vcore is 1.3v .. it wont drop (depend the PSU good 1 no hv problem)

This post has been edited by digswell: Aug 27 2008, 10:36 AM
8tvt
post Aug 27 2008, 10:40 AM

Peace Lover
*******
Senior Member
8,753 posts

Joined: Jan 2003
that's the thing vcore ranging from 1.15-1.25
some software can report.. some need to test with default clock..

with CPU-VID is easy to check coz not automatically set by mobo..
digswell
post Aug 27 2008, 10:41 AM

Look at all my stars!!
*******
Senior Member
2,484 posts

Joined: Nov 2007
From: Nilai,N.S.D.K
QUOTE(xixo_12 @ Aug 27 2008, 09:55 AM)
all guys so kaya, can pay for high electrity.. laugh.gif
*
my rig runing 250 X 11 + CnQ +vcore 0.025

idle vcore is 1.168v and load is 1.280v

This post has been edited by digswell: Aug 27 2008, 10:57 AM
MENCHELSEA
post Aug 27 2008, 10:43 AM

GEMENCHEHTER UTD
****
Senior Member
566 posts

Joined: Mar 2008
From: SEREMBAN or Gemencheh N.S
QUOTE(imsmiko @ Aug 26 2008, 11:48 PM)
Anybody use 790gx board? No one buy yet?
*
I think u might bought it in the first place. considering u are at oversea right?

This mobo sure selling at high price at Malaysia due to high demand. drool.gif
digswell
post Aug 27 2008, 10:44 AM

Look at all my stars!!
*******
Senior Member
2,484 posts

Joined: Nov 2007
From: Nilai,N.S.D.K
wait bro dblooi bulk selling for mobo biostar TA790GX A2+
8tvt
post Aug 27 2008, 10:45 AM

Peace Lover
*******
Senior Member
8,753 posts

Joined: Jan 2003
IINM my brisbane last time @ stock speed with 1.1v..
eventhough the default is 1.25v
digswell
post Aug 27 2008, 10:55 AM

Look at all my stars!!
*******
Senior Member
2,484 posts

Joined: Nov 2007
From: Nilai,N.S.D.K
just see from 3800 F3 ..some ppl can oc to 3ghz with stock vcore some cannot
the reason is some CPU stock vcore at 1.25 or at 1.23 or at 1.20
8tvt
post Aug 27 2008, 11:03 AM

Peace Lover
*******
Senior Member
8,753 posts

Joined: Jan 2003
yup the lower stock vcore we get more lucky on oc..
cwk88
post Aug 27 2008, 11:52 AM

On my way
****
Senior Member
653 posts

Joined: Dec 2006
superPI work on vista ??
8tvt
post Aug 27 2008, 11:55 AM

Peace Lover
*******
Senior Member
8,753 posts

Joined: Jan 2003
QUOTE(cwk88 @ Aug 27 2008, 11:52 AM)
superPI work on vista ??
*
ofcourse.. i'm running on 32bit
cwk88
post Aug 27 2008, 11:58 AM

On my way
****
Senior Member
653 posts

Joined: Dec 2006
coz my sometime no responding.. but prime95 work fine for me
ah_khoo
post Aug 27 2008, 11:59 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(MENCHELSEA @ Aug 27 2008, 10:43 AM)
I think u might bought it in the first place. considering u are at oversea right?

This mobo sure selling at high price at Malaysia due to high demand.  drool.gif
*
exactly... i'm not so sure whether this is distro problem or manufacturer, but d price in europe/states is alot diff than here in sgp... mad.gif

QUOTE(digswell @ Aug 27 2008, 10:44 AM)
wait bro dblooi bulk selling  for mobo biostar TA790GX A2+
*
i wait til my neck get long ledi... tongue.gif
« Next Oldest · Overclockers United · Next Newest »
 

100 Pages « < 83 84 85 86 87 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0266sec    0.38    6 queries    GZIP Disabled
Time is now: 12th December 2025 - 10:23 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.