ur mobo ta770 bios date version=?

can list ur rig spec..hard to know what hardware u using right now....

Ta770 do support 1066 ram (only when using phenom proc) ...and stock vdimm is 1.95v

This post has been edited by digswell: Jul 19 2008, 01:40 AM

New bios updated for Biostar TA770A2+ A78XA718.BST date 18/7/2008

Ram timing TRC can set lower....24 is quite high. maybe 15 or 18

Think bout it bro...Last time i did tell u bout the proc pin

i did try a few bios from there ..wat i can say is much better then offical bios.....especially A78XA328.SPX

This post has been edited by digswell: Jul 22 2008, 08:12 PM

Becareful ..some bios there only will boot when using phenom proc......athlon will no boot .

How to Hotflash the bios ....

Mobo A = mobo cannot boot or fail when flashing bios with many reason

Mobo B = mobo with all condition ok can boot

2 mobo A and mobo B must same model mobo (some time different mobo also can but must same model bios chipset , same N/B chipset and same bios program like Award OR AMI ..the program wan to flash the bios) ..hehe i do hotflash the abit NF7S2v2 bios on mobo MSI KN7delta2 (2 mobo use same chipset nForce2 and Award bios )
That Y my 2 rig same model mobo

1)Take out the mobo A bios chipset
2)boot the mobo B to bios ultility ( bios flasher ) until the step wan to flash the bios
3) with AC power on take out the mobo B bios chipset and put the mobo A bios chipset into mobo B ( this step need to do it carefully )
u can use a plastik clip to take out the bios ... is better do outside the casing
4)flash the mobo A bios chipset on mobo B until all is done then restart the pc (if 2 mobo is different model hv to direct shut down the AC power after the bios is edy flash)
5)if the mobo B can boot ...so the bios edy hotflash back
6)take 2 mobo chipset and put it back which mobo the bios belong to

This post has been edited by digswell: Jul 23 2008, 08:25 PM

So stressing the oc with orthos (at least 1 hour) or SPI 32M
and post the SS is all pass ..then ur oc resuft will in AM2 OC clan database

vcore is no high ..we do hv a ocer from here so same with u 1.40v at 3ghz

ur ram...u should use 2T mode for command rate
use all the ram setting at auto and set command rate (CR) to 2T
ur ram will run more stable if u use 2T then 1T (1T ram will run more faster but no stable)

Good ....see like is stable edy at 3ghz.
wat is cpu temp ?? maybe can usage for 24/7

oc the at big higher see how far the cpu can go if the temp is ok ...maybe 3.2ghz or 3.3ghz (for database only )

OFF TOPIC
U stay kampung melayu subang....4 years ago i work near there subang perdana

This post has been edited by digswell: Jul 27 2008, 10:26 AM

Anyone know....Can 5K BE oc the setting 15 x 220 HTT with enable CnQ ??



This post has been edited by digswell: Jul 29 2008, 02:44 AM

i no think AX78 can do the setting 15 x 220 HTT with enable CnQ for 5000 be

my point is can change proc multipier with enable CnQ ??
I wan to ask u guy b4 i upload the ss

---

Added on July 29, 2008, 9:23 am 5000be stock multipier is 13x ..so if 220HTT x 15X can enable CnQ or not ??

This post has been edited by digswell: Jul 29 2008, 09:25 AM

Any Biostar TA770A2+ user here face problem with latest bios A78XA718.BST ?? In Win XP SP2

I no very sure ....in vista sp1 and xp sp3 every is ok......but with xp sp2 i hv a lil bit problem...hanging opening program like explorer , IE7 ,FF 3.01 and other sometime it will sometime will not. Starting i think is the sata driver problem...after reinstall all the driver is still like da
Is the paging files also make this kind of problem ..Normal how big (MB) paging files u all set it

---

Added on July 30, 2008, 1:06 pmAgreed ...Windsor F3 is lil bit better then Brisbane G2 (Temp reading problem)


Ermmm Flashing back bios to A78XA328.SPX (for me is best bios for tis mobo)

This post has been edited by digswell: Jul 30 2008, 01:11 PM

she is a girl not woman (woman is old girl)

@imsmiko

4600 F3 LYP got sell..price is very cheap ...i think bout RM200. keep ur 9550 and buy da F3 . So u can oc X2 and X4

This post has been edited by digswell: Jul 30 2008, 02:49 PM

Last 2 week i did saw LYP@Viewnet got sell but no sure still got stock now ..price is bout RM180

Well ..much better then 5K BE ..need more then 1.50v oc to 3.4ghz

I still think how biostar TA790GX CF + Hybrid will work like ??
Last time i got scold by other forumer when i say AMD+ATi combo better then Intel+ATI in hardware Q/A forum there