thumbs up for tomato and victek... light and easy to understand .. not as bloated as others.. keep up the good work...

sry for the noob question here, how come the latest 1.25.8515 ND is in trx file type?

is been a while i didn't upgrade tomato ver. since the 1.23.8025 i'm currently using now.

if i'm not mistaken, all the previous normal version by victek is in bin file type right?

i thought the trx file is only can use by Buffalo & Asus router.

can the wrt54gl flash with trx?

if ur using tomato.. just go to upgrade and select the trx file... then press upgrade.. u can just change the extension to bin if u want to.. it makes no difference..

Just upload it and it would work okay. Make sure to save all your previous settings and start fresh (just to be extra safe)

I am on 1.25 , and I've to tell you that I am impressed

with both of ur words, i can say that the test version no longer exist. now it should become stable version.

How do i monitor bandwidth using users IP/MAC with tomato?

i dont think there's such function..but only detects overall bandwidth.

Hey Victek,
Do you have an ETA for the next release? (The one with the portal if my Spanish isn't that bad)

Victek - I would say it would be a nice request as I also find that would be very useful function.

i have some question....plz help
if i am upgrade from tomato 1.23 original firmware to victeck's 1.25ND do i need to do any nvram reset? and will the password log in to my routers page change? if so what is the default password for victeck's version? izit still the same like tomato default?
user: root
pass: tomato


thank you!!

it is recommended to do nvram reset after firmware upgrades... yeap it will be tomato's default username/password..

im using Buffalo WHR-HP-G54 .... using victek v1.23.8010 firmware...
is it safe to flash with Tomato RAF 1.25.8515 ND version ?

This post has been edited by StarNet: Jul 10 2009, 11:57 PM

Hi people .....

I heard of a new tomato firmware .. TOMATO MLPPP ..... I heard that it can bypass streamyx throttleing !!!!!! and bond 2 DSL lines .... the settings are almost the same .... i hope it can evade streamyx throttling ...

will this firmware support linksys am300??

yeap it's safe.. im using that too...

---

Added on July 11, 2009, 1:29 pmstreamyx disabled MLPPP.. so it wont bypass any throttling..

This post has been edited by IcEMoCHa: Jul 11 2009, 01:29 PM

Tomato 1.25.8025 (normal wifi driver version) is ready to download. When you must use this version? Do the following:

Open a DOS sesion and Telnet the router IP (telnet 192.168.1.1.. i.e)



If corerev digit is =>7 or 9 then use ND version (1.25.8515 ND)
If corerev digit is <7 use normal version (1.25.8025)

Thanks

This post has been edited by Victek: Jul 12 2009, 05:48 PM

the ND ver. is really awesome! now the wireless signal is even stronger than b4.

didn't upgrade the firmware since last year, now i realize how tricky to reset back all the config & setting to work.

i thought the Access Restriction didn't work on 1.25 or something i've mistaken setup & tend to revert back to 1.23.8025, luckly i noticed the time zone didn't set properly

now the 1.25.8515.ND will serve me for another few months? until any greater upcomin release ver. from victek. - U're ROCK!

what is this new function attached?

i couldnt telnet my router. whenever it ask for "? login" i tried "admin" i tried "root" but when it comes to the password i couldnt type anything.
im using wrt54gl flashed with original tomato 1.25, so which victek tomato should i use? the one without ND or the one with the ND?

Rearragement packets for output. Generally its all FIFO (First in first out) , now you have the option to choose , I prefer to use sfq (its very cpu-friendly)