harhar... then really sorry i dont know how to help u "see" alredy ar.

developer , working in your request .. will add reset button disabled option in administration screen... but a silly question, how will you enter in your router if you forgot your password? ..... funny... Use the SES front button and select 'Reset to default', then after you pressed continously for more than N seconds reset is done, is ok for you?

victek..i found tat the 1.25 version ip/mac bandwidth limiter sometimes not working. i nid to disable and enable back again only will back to normal. i've encountered few times already.
i never encounter this prob in 1.23 version.

that would be wonderful. thanks!

by the way victek, the ip mac bw limiter is indeed buggy. i has set the tcp limit to 10 and udp limit to 5/sec and the person still can download torrent at high speed. i thought when the tcp limit is 10 then the router will only allow a maximum number of 10 concurrent tcp connection right?

thanks victek for the reset button disable feature.

This post has been edited by developer: Aug 13 2009, 06:01 PM

set piority low and limit speed (ip)

In case anyone was still interested here is the changelog for .2:

*. Buggy implementation of 140 user position for IP/MAC and Access restriction. Fixed.
*. Added new GUI page to execute shell commands. Tools Menu.
*. smbfs updated to the latest version from kernel 2.4.37. Not used but fixed for other mod compatibility

i can set low priority but i cant lower his speed since he know how to speed test and he will report if it is not up to par

IN QOS Classification,

Set your friend "Src IP or MAC" + Port number (10000-60000) + Class (Lowest)


IP/MAC Limiter:
only set piority low



speed test no affect.

will throttle p2p ?

hi ... i have a WHR-HP-G54 ... may i know which 1 should i flash?
# Tomato RAF 1.25.8025.2
# Tomato RAF 1.25.8515.2 ND
hmm can directly flash from factory firmware?

it's hard to find stock for whr-hp-g54 nowadays.. any shops to recommend in klang valley..

You can use either, but I would recommend 1.25.8515.2 ND. The ND version has better compatibility with various wireless cards and tends to have better wireless performance.

You will need to TFTP to the router the first time you flash it with third party firmware. After that, you can flash from the user interface.

^- ok thanks =)

tomato possible to implement below function?

when no people surfing net, the bittorrent is running full speed but if there is surfing net and dl bittorrent at the same time, the priority goes to surfing net...

is it the function of QoS ? if yes, how to set it?

tomato already has the function build on but i dont know how to configure properly..

when running bitorrent, the program will hog the bandwidth and establish many conenction to other peers.


These connections are preventing my other programs such as Steam to establish connection to its server.

At the moment, i have to reboot the router to fix the issue. I also have QOS done. But it doesn't really helps when i have the torrent running or stopped

However, when i quit the bitorrent program, the connections are still there. The question is is there a way to discconect the connections without having to reboot the router? Thanks

This post has been edited by tyss: Aug 16 2009, 03:52 PM

Hy. Tomato is a great firmware. But it only works on broadcom routers with at least 4Mb flash. I own the GC version of Asus wl-520. It's the same as 520gu but no usb and only 2Mb flash. Do you think that it is possible to strip some features like bandwidth monitor, themes, overclocking so that the firmware will fit on a 2 Mb flash? Thanks.

normally i just set the tcp connection timeout to be shorter. like 2 minutes or something

---

Added on August 19, 2009, 10:27 pmi am using 1.25.8515.2 ND now and i have a problem. when i issue a reboot command via the web interface, nothing happened. it just says rebooting and give a timer for me, then after that it would just redirect me back without rebooting.

This post has been edited by developer: Aug 19 2009, 10:27 PM

Is anyone using Victek's firmware on the WHR-G125? I would like to know if can support or not. Quite interested to change the firmware on the router to Tomato mod, but dunno if supported or not.

I don't own that router, but yes, you can use the ND version of Victek's firmware on it (Tomato RAF 1.25.8515.2 ND). Do NOT use the non ND version (Tomato RAF 1.25.8025.2) as it will likely brick the router. That particular chip-set requires the updated wireless drivers to function correctly afaik.