nope.. nite time.. air cond is about 29/30°C.. air cond room decrease the load temperature more..

if noon time idle is about 35/36°C

Nice
My idle temp use to be 30C/34C. (E7400@ 3.8ghz, 1.31v)
But now I'm using Windows 7, its 35C/39C.

It's weird though, what could W 7 have done to increase 5C on both of my cores...

I wish i have air con...

Mine 40,36 even in aircond. Stuck DTS.

-pWs-

Damn!! this is not fair!
my idle tempreture never reaches below 42 celcius even at night!
Care to explain this?

u r using hyper tx2 plus a cheap casing.. which means u have bad air flow?

---

Added on November 3, 2009, 9:51 pmyr graphic card is a dual slot cooler or a zalman fan type? mayb the heat from GC made yr air in the casin to be warm.. lack of ventilation..

This post has been edited by farscope: Nov 3 2009, 09:52 PM

allrite then, i'll install a mini aircond inside my casing..

since when hyper tx2 plus became casing?
that's cheapo heatsink no wonder it's warm..

He said "....hyper tx2 plus a cheap casing....." The PMR aftermath must have gotten you all fuzzy ah bro?


Anyways hazairi, install another fan on that TX2... becomes twin fan
Or sell it in Garage Sale and get a RM100+ HSF minimum.
C-Zone @ LYP got AC Freezer Extreme for RM149. I'm using it, 3.8Ghz idle 35C/39C (30C/34C before using Windows 7) in the hot noon. Max 59C. (not bad for aircooling HSF)

lol unfortunately hyper tx2 plus also a heatsink..
what PMR..

My E7200 @3.86Ghz


6 Hours OCCT

This post has been edited by sky5191: Nov 11 2009, 10:22 PM

1.5v is high bro. How is the temp?

-pWs-

1.55vcore only stable for it around 67c somthing....... last nite only test 406x9.5 @ 3.86Ghz @ 1.60vcore OCCT 8 hours 72c smthing ... picture havent upload....

is there a big different between E7400 and E8400?

how big is big?

in terms of cache size, E8400 is twice the E7400..

btw, tis is an OC thread.. not hardware thread.. pls proceed to Hardware Q&A if u hav any other doubt..

Currently testing a E7400 in office (Office CPU) from 2.8Ghz@3.57Ghz with 1.28V. Temp around 60c full load now with stock cooler

Using budget ASUS P5KPL-AM mobo with Kingston Value RAMs DDR667 1 GB X 2 with Hynix chips

Currently at 340Mhz FSB 4:5 ratio, RAM at 425Mhz (DDR850) 5-6-6-15 (Orthos testing)

This post has been edited by shinjite: Nov 12 2009, 11:22 AM

u OC ur office pc?? u are insane.

mine use e7500 but kenot OC it, it's dell brand.

is E7500 good for ocing?
i saw sumone selling it...

Yupz, what to do, bored at office so play play a bit loh
Its been years since I overclocked any PC, my time was during the P4 era~~

Anyway, found out the limitation of this board

1) Cpu Vcore max 1.4V only
2) CPU and memory ratios are ballz. 667Mhz is 4:5, 800Mhz is 2:3 and 1066Mhz is 1:2, there is no freaking 1:1 ~_~
3) Limitation of the RAMs, can't post at 431.25Mhz
4) No option for turning off spread spectrum??? ~_~

So final OC which is able to post is at 343Mhz FSB X 10.5 = 3600Mhz, RAM at 429Mhz 5-6-6-15-2T (4:5)
Orthos stress testing now at 1.288 Vcore & Dram voltage set at 1.95V

Temperature at full load hovers around 58-62c, highest is 65c with stock cooler

This post has been edited by shinjite: Nov 12 2009, 04:30 PM

If OC phailed, then no problem coz office property huh bro? Those office PC's are better off to be OC'ed anyways, they'll serve better purposes that way
My E7400 can OC safest with stock cooler is around 3.2ghz...
Anyways a 667mhz RAM give a more versatile OC presets if OC below 3.6mhz, with guaranteed stability... but of course u need 800mhz/1066mhz if you start wanting to OC above 3.6ghz.

E7500 is RM20 more than E7400 and E7500 is 0.13ghz more than E7400, the cache is the same, dunno why intel bother to produce this chip though, but I have the slightest faith that the Vcore is lesser than E7400, (the only purpose i can think off why intel produce this chip) this one gotta google up.

Good for OC'ing?? Why not..

Hmmm....funny, it won't POST no matter what I do if set the 345Mhz FSB
344 FSB can post, ~_~