Still got a lotta way to go man
My FSB can hit only up to 423 MAX (@ 9x multipliers of course, 10x is too much for the proc to handle) on E7400, but kinda unstable. I'm curious to see how much can you push the TPowerI45's FSB. It's a fact that u'r TPower mobo can do some impressive FSB values..

Anyways, this thread has been "asleep" nearly a month, too busy with 'open houses' i guess...

Ermm. 450FSB for this board having some boot issue randomly though not often.

-pWs-

Update w/ 416 x 10

Prime 1 hour no error. Hope to get 4200MHz.

-pWs-

This post has been edited by -pWs-: Oct 8 2009, 12:04 AM

HOLY CLOCK!!

why no thread for quad meh? no one want to try suicide run for quad meh?

4200MHz {420x10}



-pWs-

almost at the limit of Vcore by doing so.. tried lower multipler and pump FSB? 450x9

but yr value ram will reach its limit at 900Mhz..

Just want to find out how high this proc can go.
Daily running 450 x 9 or 400 x 10.

My value ram can exceed 900MHz @ CL 5.

-pWs-

That TRU 120 Ex does a pretty good job taming the heat of the E7400 on 1.56v+...
Man I think you'd broken the record of the 'highest mhz achieved' in this Topic alone
Are you gonna push the proc any further than 4.2ghz for the sake of benchmarking bro?

Your KVR shows that people dont really need HyperX to get the job done

@farscope,
How's it going man? have you OC your proc to 4.0ghz yet?

I will go for more than 4.2GHz for 3DMark bench later.

Sometimes KVR really does the job well.

-pWs-

i'm leaving it at 3.5Ghz as it is enuf for my 24/7 use.. haven get to try 4.0 thou.. 3.8Ghz yes..

my pariah mobo cant allow me to do anything higher than 3.6ghz. stuck at 343x10.5

This post has been edited by VT-Ten: Oct 18 2009, 01:10 AM

^ wat mobo n wat vcore?

cheapest 775 mobo from asus; p5kpl-am.
was pumping at 1.5vcore to do 400mhz with perf rams pinjam from fren.

heck, it cant even post at 400x6

What ram divider you use?
Btw, Happy Birthday.

-pWs-

running on 4:5
gee, thanks bro

Oh. Try 1:1 divider and push to FSB 400.

-pWs-

i wish. there is no 1:1 option on this mobo (or was i too n00b afterall?)

Just check your board's manual.
The lowest is 667 divider.

-pWs-

Bro, i can see that your minimum temperature for E7400 is about 38-40 Celsius. Is your pc in an aircond room?
My minimum can only get 42 Celsius..

yup, ram set to 667 and running on 343 FSB, the ram speed is already running at 428mhz.