then how many to add for oc??? how i should try?

Mate, overclocking isnt just involving vcore, there's lotsa tweaking and settings involving ram, mobo and of course your proc too. You can check out kmarc's oc guide for starter =)

Edit :

Added up the link for you - http://forum.lowyat.net/index.php?showtopi...hl=overclocking

This post has been edited by mizivincible: Jul 20 2009, 02:47 PM

i want to use bsel mod on my e2200\intel d945gcnl board

after searching through the internet,i found that i need a conductive ink pen to connect the contacts or use tin foil

since i don't have a conductive ink pen,i would like to use the tin foil

can any of the sifus here teach me how to attach the tin foil to the processor?use glue maybe or what?

any help is greatly appreciated

simply use any foil paper and touch both pin.. tin foil is just too thick

This post has been edited by chchyong89: Jul 23 2009, 03:50 PM

how to make it stick to the cpu's bottom?anybody care to enlighten me?

tried using setfsb yet?

tried,but it didn't work as the ram got oced too.it went too high

Hi all, I m very sad 2 say dis but my proc is gone 4 gud... Juz bought myself a E7600 C2D, dun be mad @ me... I really appreciate 2 all da E2xxx sifoo who help me out getting my E2180 to achieve 3.6Ghz for da past 2 yrs... Now I still have da proc wit me, Maybe I will build a decent rig 4 it n try 2 get it running back @ stock speed if possible...

from time 2 time, I will try 2 visit dis thread n contribute my OC experience 2 all TEAM E2OC members...

here is my bsel'ed E2180/2X1GB DDR2-667 corsair on ECS 945GC.. oc'ed @ 3Ghz by setFSB.



just get any alluminium foil paper, instead of tin foil. Simply use glue to paste on it.

However, i done 333Mhz bsel mod before on P35 long ago. And take note, 333Mhz mod NEVER will work on 945 chipset!

p.s. My processor temp is high, because i running my stock cooler @ 5v less than 1000rpm. load@60" max@62" , why? because i hate noise.. especially those cm blue, green, red fans, when supplying 12vdc : , the noise really make me goes like hell...

This post has been edited by chchyong89: Aug 6 2009, 11:43 AM

anybody still ocing e21xx?? i got 338x9 (3.04ghz) on stock voltage on my e2160 L2 stepping..i've never increase voltage before but since i've upgraded my gc, i think i wanna go further..hoho..this processor bottleneck my gc..demn it..any help??

This post has been edited by alanishev: Aug 7 2009, 07:48 PM

I do E2140 G0 at 440x8 = 3520 at 4-4-4-12 1:1 ratio on P35 blood Iron. with +0.50mW vid.

havent try pushing harder.

with +0.50mW vid <--what is this?? huhu..

400++ .. i wish i could go there..

i bump extra 0.50mW to my proc

i bought e2200 with dg31pr its a bundle i heard that you cant oc at all is it true for dg31pr?? plz tell me me also i have 2 gb ddr2 ram 800 bus and 160gb hdd it has 11x core multi so can go at least 4 ghz?

@NewbieBetta can you post cpuz validation and screenshot really want t see which ram did you use?

---

Added on August 19, 2009, 4:41 amalso is it running stable and are you using stock cooler??

This post has been edited by Riddhy: Aug 19 2009, 04:41 AM

1. Almost all intel mobos have their bios locked, so the only way you gonna get oc is thru pin mod or using an oc program like setFSB

2. Your multi is very high but keep in mind that most E2XXX are limited to around 3-3.2ghz on stock cooling, and most max out at 3.6ghz regardless of cooling methods

i tried OCing my E2160 to 3ghz,and when i try prime95,there is an error

i'm not really familiar with OC stuffs,is there anything wrong with the settings?

http://img44.imageshack.us/i/95665216.jpg/

How about your ram settings? Please run small FFT 1st. If its stable, then perhaps the problem lies with your ram

think i found the problem

i set the voltage control back to auto instead manual,and no problems.

but the games do crash once and a while,due to overheating?

unlikely, i think you OC is still not stable. Make sure u compensate for vdroop when setting your voltage. And please OC thru bios

I wonder weather the E2180 MO is capable of OCing till 3.8Ghz like the GO models... I never had chances of trying it... M y proc began 2 give up @ 3.6Ghz...

@ joe_star

Ur GO can run @ 3.8Ghz stable???