well running orthos without error is not 100% will make ur gaming not crashed or get BSOD...
there's several things u might consider..
1- ur gfx driver...most likely this one
2. ur ram...timing to tight or high speed...loosen a bit
3. ur fsb to high..lower it a bit
4. ur vcore at the lowest line...maybe ur proc need more in gaming instead of orthos

This post has been edited by flatfinger: Apr 22 2008, 10:20 AM

Thanks for the comment .. I guess the problem is RAM now .. Orthos blend doesn't 100% stress the RAM also ..

yup correct...try memtest in window about 200% above...

Never use memtest before .. Where can get it ?

NVm.. found it .. thanks anyway..

This post has been edited by Amedion: Apr 22 2008, 10:54 AM

for others
Memtest Download link

This post has been edited by flatfinger: Apr 22 2008, 10:56 AM

i would suggest to run your memtest with this settings

1. Since youre running dual core, run two memtest programs simultaneously and for each of it run Total ram you have divide by 4

Totat{Ram}/4 for each memtest program till it reaches 1000%

Then confirm stable.

hmm......i find that memtest also a lil buggy, gives me errors in systems that hv proved totally stable over long long periods. Prefer the original memtest86, that u boot into straight after bios

ok guys got my ballistix..so pushing my E2160 to the limit...here's the result....

Mama mia.....beautiful

Best result ever in LYN... flatfinger, I will update those results tomorrow, got to go to sleep now

well best ever for a e2160 that is... cant help look at the FSB and the multiplier... still good stuff for e2160... flattie can u do a 32M super pi test for me..

Still waiting for someone to hit a sub16 seconds for e2140.

will try later if clould...i'm not sure it will stable or not...already bump 1.7v.... coz my target only for SP1M

This post has been edited by flatfinger: Apr 22 2008, 10:43 PM

what cooling are u on bro?

gigabyte 3d galaxy...

1.7vcore --> WC ok la bro...3d galaxy also nt bad...

This post has been edited by Bigblock: Apr 23 2008, 09:12 PM

walao!nice dude

Wc always nice
thx

new core temp release!!!

Core Temp 0.98.1 link

This post has been edited by flatfinger: Apr 24 2008, 10:55 AM

The temp shown for 45nm procs are still wrong

newbie reporting in
Just get some new toys,
G0 E2140 (Check CPU-Z) & Elpida chipset KVR

3.6G Pi 1M


1.8vdimm 1000MHz dual 32M stable


my rig


offtopic bench


found some issues
1) Blood Iron couldn't post with crucial 10th anny installed
Anyone try 10th+ BI combination before?
2) Blood Iron NB heatsink, can i remove it without voiding the warranty? It's very hot and kissing my HP-1204 air cooler

3) The ram slot hard to close/open with gc installed

4) Not enough JFAN port to use ( 3 only)
I have 4 JFAN ports for my AMD matx mobo TA690G
5) Issit possible to flash LAN Party UT or DK P35 bios into blood iron?
I need CMOS reload function badly

guidance & suggestion are needed, thanks in advance
will try to bench further once I'm free

This post has been edited by dblooi: Apr 26 2008, 04:38 AM

That's why I hate my current abit IP35-E... Have to clear CMOS everytime I mess up