well according to gigabyte website there is a new bios .... so i'll just try flash this new bios la...

wahhh...this new bios alredy support for amd tri-core maaa....
but sure bottleneck la when put tri-core in this mobo...

This post has been edited by fuzore: Mar 11 2008, 03:05 PM

If it is a good OCer, then for sure current AM2 mobo will bottleneck its potential. But then I'm afraid that it will be just like Phenom X4, which is not so good in OCing because tri-core is a quad with one core disable right ?

tri-core b3 phenoms arrivin may this year...

bro u r right when u & the others said it was bios bug problem i just flash my mobo to latest & tried setting up
ram everything works like i want to...

Well guys i am back!I manage to reach 3.0GHz without any probs after changing to older version of BIOS.But i cannot run Super PI Mod !! It says

"Not Exact In Round"

May i know what happends?I hope some1 can help me.

well, i wasn't d one who said it was bios problem. credit goes to bro awh85.

meanin that d oc cpu clock and / or ram speed is not stable. increase voltage or decrease speeds/clock.

Oh.I will lower it then..

Add one step of Vdimm.

-pWs-

bro, can i assume error message "not converge... sq..." means add more vcore then?

Oh I see. My bad

-pWs-

there are two type of error message i supposed but i'm not so clear what both mean...

usually, when these two errors occured,ill try to increase vdimm first..if still cant, ill increase vcore,and so on..trial and error..but "not convergent..." usually is bcoz of the ram..

= = deadly
I increase the VDIMM=BSOD..I dont think need increase VCore as my vCore already 1.5V..= = Thats a high.Btw,here's some screenie.



AMD Athlon 64 X2 4000 G1 | AMDAthlon | Biostar TForce 560 A2+ | Kingston DDR2 667 | Unknown | 4-5-5-15 CR 2| Artic Cooling 64 Freezer Pro

This post has been edited by AMDAthlon: Mar 11 2008, 05:57 PM

Alamak, abang abang, still you guys havent rekemen good OC SLi board. The card I wanna SLi isnt G80 Ultra or GTX la haha, just 320 G80. Sayang wanna sell the card so might as well SLi.

---

Added on March 11, 2008, 6:16 pmTo bro -pWs-,

My ss dont know where, perhaps I ter-delete it. At 3.3ghz, I need 1.38v, when orthos full load 1.35v With timing 5-5-5-15-21 2T. Full stress 12hours. Thot gonna use this for 24/7 but now run 3.2ghz at 1.31v, 1.28v load.Anything that I missed out ?

This post has been edited by mizivincible: Mar 11 2008, 06:16 PM

Bro, mine last time with 4-4-4-12-16 2T I manage to hit 3.0ghz with 1.44v. Heres some screenie, hope it helps -

Stable meh?

Haih, add another step of vcore for safety purpose and run orthos for you, there u go. Picture tells a thousands words.

@AMDAthlon, ur ram speed will be 580Mhz

Thanks zaz

But still mine not stable lehz..= = 5 Sec STOPPED!!.
Why ah?Voltage same with you edy even the clock.

Can anyone tell me what is spread spectrum again ? And if I wish to go higher, does increasing HT voltage or NB/SB voltage helps ?