Enable it. Enable 2T = 2T

Hold on bro,if you say so den why it has this?

N56BAC21.zip BIOS for TF560A2+
Release Date 2007/12/21
Update Description:
1. Update BIOS source code.
Note:
This BIOS is for the AM2+ only. Your board may not POST with an AM2 CPU if you flash this BIOS.

So which 1 are the safe for me to use?

tat 3 bios only can flash if u use phenom proc
others can flash with x2 proc (athlon & sempron)

did u understand wat is AM2 and wat AM2+ ??

This post has been edited by digswell: Mar 11 2008, 12:29 PM

you sure?Cos other also say same thing at the below..

enable = 1t, disable = 2t, dfi's bios is abit tricky but it's fun to play with...


bro, it's diff if compared to our board if i'm not mistaken, cpc = 1t, so one gotta disable it in order to run 2t.

This post has been edited by ah_khoo: Mar 11 2008, 12:55 PM

btw is there anyone here have ever use the same mobo as mine...

i nearly got, but that time tight budget can't afford.

just stick w/ it while waitin for d 790fx boards price drop...

hmmm..i'll double check the bios again later tonight...thanks bro..

I see, my bad though I thought it is the same with our board

ha...what is the price that time i bought at 3++ onli...

that's 2nd price, ta690 cost only $120 for a brand new board & it is proven clocker while 570sli is... ermm...

@ bro pWs:

pls verify that d 1t/2t thingy, as far as i remember, cpc = 1t rite? pls correct me if i'm wrong.

bro get one like me la.. so then we can have headache together .....

---

Added on March 11, 2008, 2:03 pmha..ha..ha.. i think that proven not so clocker mobo (570sli) is definately true...

This post has been edited by fuzore: Mar 11 2008, 02:03 PM

I got 3 options for that 1T/2T thingy.
1. "AUTO"
2. "1T"
3. "2T"

-pWs-

@bro dblooi..-pWs-
i followed ur advice on my ram bios setting and guess what i set it to 5-5-5-15-2t
but when i boot it cpu-z still read 5-5-5-18-2t then i tried 4-4-4-12-2t and it come up
4-4-4-18-2t also....
seem that what ever i do still cannot change that value la...

did u change the correct one? (maybe the u left it at auto and changed 12/15 for something else) or maybe bios problem?

ur lucky bro to have not suffer d headache.

dun quite get what u mean here.

cpu-z read timin showed d values saved in bios, if d value displayed are not d one u saved in bios, meanin that they were not saved properly. for ya case it could be d timin too tight to d board's likin.

This post has been edited by ah_khoo: Mar 11 2008, 02:37 PM

for me, if its too tight, it wont post. if it can save (in bios) and enter windows, i think maybe tras auto adjust coz too tight maybe? (dunno got such thing or not)

or maybe he can just try leave the tras as auto and use that setting and see what value it is given.

added : or maybe he can double check to see the value he changed was actually tras.

This post has been edited by awh85: Mar 11 2008, 02:45 PM

It seems like BIOS bug. Any new bios available to flash??

DFI ler

-pWs-

havent check yet .... donno new bios is good or not..

they just play with d language only... dfi always d best for amd...

@fuzore

try to flash w d latest bios.