AMD Athlon 64 X2 4000+ Brisbane BH-G1 | AMD Athlon | Biostar TForce560A2+ | Kingston DDR2 667 Value | 533Mhz | 5-5-5-15-CR1 | Stock



Btw how to add voltage eh?I add via BIOS straight kena BSOD
Btw using stock voltage too.I guess might upping higher if got good cooler like Artic Freezer 64?Maybe?
Temperature Idle very cool oh 33C when stress 60++ when gaming 40-50++

This post has been edited by AMDAthlon: Feb 21 2008, 11:35 AM

Dont think so eh..Everest not accurate meh?

o.O

Increase the chipset voltage how much ah?Dont want so high..insufficient cooling

Btw,yes i use it and set it to 100% de..
Yeah temperature abit crazy but when idle very cool oh 33C...



This post has been edited by AMDAthlon: Feb 21 2008, 12:20 PM

got 1 25CM fan and 1 80CM fan..i need more fan lor..Btw,chipset cooler good?And looking for cheap one.Which 1 you guys prefer?

Damn hor..I need to get Cooler soon..if not cannot achieve higher...and perhaps better PSU..Waiting Tri Cores..Hope Phenom Tri Cores does better OC too?Maybe...

Kind off topic here

I hear AMD Tri Cores gonna be released in Late March and perhaps we recived it on early April?So what do you guys think about the price?And i guess TLB bugs should be fixed.I've read somewherelse that the bug has been fixed..Btw,if the phenom still doesnt satisfied us..our only chance is...Fusion..Which is on December.Uses 45nm Processor,while Intel are switching to 32nm next year.Btw,Once reach@dec/Fusion released no more 65nm processor in the market.AMD will pull it and replaced it with 45nm.I guess say goodbye to X2 after Phenom X2 released
And perhaps phenom X2 might performs better?

This post has been edited by AMDAthlon: Feb 27 2008, 08:13 PM

From what i hear the newer phenoms will be using B3 stepping too eh..If not AMD stupidly use buggy stepping for X2 and X3 lor..

Yeah i guess so..Amd X2 still being best bang for buck..So i hope it will AT LEAST give good OC capability,Larger cache at least for our hunger OCers.. .I still satisfied even it cannot beat intel very well...But at least..an improvement.

This post has been edited by AMDAthlon: Feb 27 2008, 08:20 PM

Yes the disabled one core.But surely they will disable with Fixed TLB one..If not its a waste lor..using a buggy Phenoms.Yes its upcoming Deneb 45nm proc.Come see this thread..No ones cares though.. and Fusion Chip is based on phenom..

http://forum.lowyat.net/index.php?showtopic=620926&hl=

This post has been edited by AMDAthlon: Feb 27 2008, 08:25 PM

Phenom X2 is codenamed Kuma de..If tri core using b2 batches..its a buggy processor then.Btw,if the price is@RM 400 who gonna grab it?=x Since Phenom is 700++..i dun think tri cores higher than 600..

Kuma @RM400 high liao..I mean for Tri Cores..If Tri Cores 400-500 its time to save $$ le..

Lol yah sorry too.Btw Sempronic,does your Phenom system can OC well?= =

Definitely lor..Cos Quad core ma
Btw,how's your sempron system doing?

Btw sempron dual cores is coming $55USD..who gonna grabbing it?Those hardcore overclockers sure hunger for this baby..Sorry for of topic.

Btw,If we increase VCore,the CPU temperature will rise too right?

Whoah so many moving..I am waiting for X3 before moving to a newer mobo=x

But i still prefer for Biostar..I am sure when Phenom X3 out..There will be a new mobo to support it.

For Phenom's Overclocker,here some news for you guys.


AMD, Rumored to Ready the Overclockable Barcelona B4 Stepping
- What will happen to the upcoming Cx is a complete mystery.


So good that we've skipped a version

AMD's K10 quad-core processors seem to have been followed by bad luck in each of the previous revisions. Some of them were fully-fledged disasters (such as the over-dissected TLB
errata in the B1 and B2 steppings) that kept the quad-core powerhorses away form the retailers' shelves. The upcoming B3 revision finally brought the Barcelonas back to functionality and sent to hell the TLB bug. However, it seems good is not enough, and AMD is in a quest for perfection.

The B3 stepping is slated for release somewhere in the second quarter of the year, after a number of delays and fake rumors alleging that it is still crippled by design bugs. However, a bug-free silicon is not quite enough for AMD because of its limited overclocking potential.

That is, while the upcoming healthy Phenoms will be clocked at core frequencies of 2.2 - 2.6 GHz, Intel will unleash the 3.2 GHz behemoths embodied by the soon-to-be released QX9770 45-nanometer Intel Core 2 Extreme quads. To cut it short, Intel is one Gigahertz ahead of AMD, and this happens at stock core speeds.

Add some other 400 or even 500 MHz that can be squeezed out with some professional cooling solutions and you'll see that the picture is kind of sepia, if not fully black and white. On top of that, while Intel's QX9770 is an energy-efficient, low-heat byte devourer, AMD's K10 series is manufactured on a 65-nanometer process.

Rumor has it that AMD is secretly baking the B4 version of the silicon, that will include both the B3 bug fixes and some extra overclocking capacities. The B4 is expected to kick in during the second quarter, also, but it might directly replace the B3. This way, AMD could adopt Winamp's slogan: "so good that we've skipped a version", although this would be too sadistic to its customers. The B4 stepping will make an excellent starting point for the future Black Edition and Phenom FX series, that would allow them to overcome the 3.0 GHz barrier.

Still, one of the previous reports alleged that there will be no B4 revision ever, since the next silicon will be the Cx, based on 45-nanometer Shanghai cores. But again, can anyone of you remember when was the last time AMD kept its promise to the end?

Quite interesting huh?I hope the B4 stepping is really for a hardcore overclockers.

Source

AMD Phenoms tri cores price is at RM 500 sia..

This post has been edited by AMDAthlon: Mar 4 2008, 07:26 PM

But when i change the Windows are UNBOOTABLE..I change to lower since me using 667..but still after i change it stuck before Windows screen come

VCore is at 1.35V..Yeah i should pump Vdimm = = VDIMM in other means is Memory Voltage ah?

Just now i did pump the memory voltage up to 2.20Volts.Still the results same unable to boot windows.Dont tell me that it needs higher volts?..Wont it damaging our rams?= =

Integrated Memory test you mean?I need to run the test first ah?