@vtec
proc batch for ur highest oc???

do u guys disable C1E and EIST during OCing?... cuz i don't maybe thats why its not stable at lower vcore...

Yes...mine both C1E and EIST disabled...

will it affect the stability if enabled?

I off it when i oc.And it is pointless to on since it will step down your multiplier

Still, it is a nice power saving feature. Most of the time ur pc goes idle and every watt count might save ur bill.

those power saving function will help to save your pocket, if you have your system on 24/7.

the rampage formula bios is awesome

OMG u got rampage already........ uhh.... why is it awesome?

which bios version?

Someone over at Xtreme had a guide how to mod/use a Rampage BIOS on a Maximus Formula

trd 6 finally on 500 fsb.
lower vcore..

no dude this is using the afudos to flash the maximus into rampage..
was waiting till somebody posted the ES afudos so can revert back to maximus..

bios 0219
hence naming it Rampage Formula SE. .. actually should call it Romulus Formula SE.. kekeke

before mobo was stuck at 520 stable.. not benching stable at 545.. will post the e8500 when get the ram timing done

This post has been edited by cstkl1: Mar 16 2008, 05:09 PM

Err....i think my e8200 temp quite high lol
when idle it already 52-59c
after i overclock abit like 375mhz it goes up to almost 70c++
isit the software wrong or cpu problem???

btw i using different software to show the temp but all same

Try realtemp and see how.

Hmm....quite weird real temp shows 43~48 when idle while core temp shows 53~59. btw which one should i refer to? the difference is about 10c lolz...

yup..its 10c differnt reading..im using realtemp as it more accurate compare to others..

oh i m using 0219 as well... kinda nice bios lol...more control on PL

u said it..
but one thing ..
the PLL voltage has no effect.. i mean not much

like previously i need 400fsb 800 CL3 on maximus to run at set 1.54v NB 1.33v TRD 5
but now just leave it at 1.5v

previous 500fsb 1:1 need set 1.6v PLL NB 1.65v TRD 7
now PLL 1.5, NB 1.55v

both fsb termination on 1.3 set. GTL 0.61x

find it weird..
before the problem was i can pass memtest, orthos but need very high PLL so my dreamscene or video's can play without crashing
on rampage bios no issue.

This post has been edited by cstkl1: Mar 17 2008, 06:12 PM

just gotten a new proc...so i cant compare with maximus settings.... now need to find out all settings again... sigh... its good that it needs lower voltages for the default stable...so i dun think we shd complain much hahaha

is realtemp temperature readings trust-able?