Siram…

You will get better performance on a newer ASUS router

The AC68U USB performance is kinda poor.

But… at the cost of buying a new ASUS router, you can get a proper 5G modem router. Might as well keep it

Got english guide?
I cannot understand........

Edit: Found English tutorial, seems quite leceh, will try figure it out.

Edit 2: Tried, doesn't work. No data flowing in the tunnel.

Edit 3: I used Cloudflare free Warp, finally works for torrent. But dunno can last how long.

deswai i ask him to try to use ethernet tethering with a dongle (if his phone support this feature)

he is now using wifi hotspot gonna generate damn lot of heat for the phone
just follow exactly what the video shown then could get u ahem warp+ and use on wireguard client.

deswai i ask him to try to use ethernet tethering with a dongle (if his phone support this feature)

he is now using wifi hotspot gonna generate damn lot of heat for the phone
just follow exactly what the video shown then could get u ahem warp+ and use on wireguard client.

Not sure if Xiaomi phones support it
I know Samsung does
Even if it does, you are limited to roughly 300Mbps due to USB2 to Gigabit Ethernet adapter, (480Mbps USB with overhead)

He’s using USB Tethering to the ASUS router to work as WiFi router so the heat won’t be so bad on the phone

But older ASUS routers don’t have a fast USB port, AC68U is like a 10 years old model now

Still receiving frequent firmware updates tho, got to give credit when it’s due

yes, ethernet tethering should be able to fetch him around 300mbps because his usb tethering direct to laptop gives him 320mbps.
300mbps is better than his current 120mbps
u double check again his usb tethering to asus router only fetch him 12mbps. deswai he is using wifi hotspot and asus router as repeater or media bridge.

yes…888s unisoc and 888 x62, 888 ultra x65

yes…expensive. ppl rather go for mediatek t750 platform.

u see tplink put a fan inside x50 5g (x62 chipset) then u know how hot it will be for older x55 but higher performance.

so i really recommend those ppl who using fanless qualcomm chipset 5g cpe turn off its wifi and wired connect to another router as access point to offload the wifi chipset heat. of course you can use a fan if u don't want so hassle.

Yes my mc888 sibei hot
Operating @ 60c constant
And i use it as modem only, didnt have wifi on and connect to my tplink mesh
Anyone has t750 normal operating temp? For zyxel nr5103e that rebrabded as ee/3? Zyxel 5103e also got fan at bottom

just follow exactly what the video shown then could get u ahem warp+ and use on wireguard client.

But older ASUS routers don’t have a fast USB port, AC68U is like a 10 years old model now

fiberhome LG6121F

https://kknews.cc/digital/yxxvlna.amp

Ya i follow exactly the video, don't work.
Maybe u mobile block.

Have USB 3 port, I cucuk to USB 3 eventhough the phone USB 2 only.

So which one is the cheapest bestest 5g cpe that can lock band?
Tp link x50 5g? 1.2k ringgit oh....

too bad
try use type c to ethernet je if phone support ethernet tethering

https://s.lazada.com.my/s.TFd7W
cheapest maybe this…i don't know

https://s.lazada.com.my/s.TFd4o

Okok will try ethernet.

The modem used what chip?
Qualcomm x75?

I just bought the 3 version..speed average 250mbps, huge upgrade from 4g router of cap 20mbps. Satisfied. Bought during 8.8 sale RM690 after 10 percent discount.

3 version is ok…don't get the EE version.

4g is vastly depends on the area congestion

some area even with 3CA (1+3+7) also less than 20mbps, some area can hit more than 80mbps.

in my area, i rather use single band b28, at least i can get 30-50mbps download speed.

Why EE version sheet?

u can ask The Wee Bear, he got EE and Three variant

https://www.ispreview.co.uk/talk/threads/ne....38663/page-107