haiya.. why is it so hard to upload pics..

u use what to upload pic??

imageshack is quite ok

---

Added on December 5, 2007, 11:07 amlately quite buzy in FYP

last time been try 2.1v with loosen timing

this is the highest i get~ tonight try tight the timing



This post has been edited by tachlio: Dec 5 2007, 11:09 AM

it is a MUST for amd platform, and install the stronger ram nearest to the cpu.

This post has been edited by gsan: Dec 5 2007, 11:09 AM

need try every stick ??

Wow that need more time le~


maybe wait back campus i try it out~

bored~~~ where is the result??.. too little F3 user show the result

ya, you have to find out which stick of the ram is more overclockable, then you put it nearest to the cpu.

bored?..hehheh...

they still in progress..once got stable 1 this thread sure will flood..mine OTW...

3.2-3.35 pass super PI 1M at vcore 1.3 vdim 2.2..but all failed super PI 32M(while in progress my pc shutdown.if not sure pass)

3.4GHz Vcore 1.35 Vdim 2.2...

will post ss once i got stable...

no bro , install the stronger ram to nearest dimm slot will lower down ur oc
hmm...let's explain it with an example

assuming that i've 2 sticks of crucial 10th,
one stick can reach 1300 ( call it as stick A)
another one can reach 1280 ( call it as stick B)

if i put stick A to nearer to cpu area and stick B next to it (forming dual channel)
most probably i will get 1240 like that only

if i put stick B to nearest dimm slot,
i will get roughly around 1260-1270 like that

the stronger stick should place at 2nd nearer dimm slot while the weaker one should place at nearest dimm slot in order to get best performance

This post has been edited by dblooi: Dec 5 2007, 01:05 PM

all busy OC kaw2 lor..

now they getting "sweat" spot...

After some sweating+tweaking, once got the sweet spot sure they will upload OC results here

---

Added on December 5, 2007, 1:13 pmagreed as the stronger stick easier to OC and no need to put nearest to CPU.....

those hard to OC stick put near CPU lah!

This post has been edited by ongbs: Dec 5 2007, 01:17 PM

what happen if my pc keep shutdown???when saw temp all ok..cpu and pwm around 40 only..system 36...

Mostly is because of PSU.

-pWs-

psu???aiya..st56f still not good r... what make my psu like that???

Haha...Just suspect. Not sure though
Try to lend other ppls PSU and test.

-pWs-

Looking at your specs, your psu is goof enough for OC'ing.

So how? Managed to get tighter timings or lower vdimm?

Tried 5-5-4-11-15. No much time to test yesterday.

-pWs-

abang ong, mana iced water?
no more oc nowadays?
oh ya, how's the proc on DFI ultra2-m2?

maybe caused by unstable bios also. try to use diff bios, if u use latest bios, try to reuse older bios.
bios which not properly installed will caused stability issue..moreover when u oc ur proc..

yeah, maybe true. but i think his PSU already great enogh for ocing...

What's the 11-15 indicate?

Yeah, I know..... my rig also no free time.... have to fold..... (I'm otherwise quite free!!!)