OC is addictive.. hehe.. im new to OC too. recently just managed to OC my 4000+ at 2.6. Now trying my luck to reach 3.0 tho. heheh..

erm guys. nyone can tell me how to reduce screenshot file size? I cant upload la. haih~

bro -pws-

Please update mine.

OC cant go higher due to 'sayurness' value ram. Even top up vcore to +0.050, i can up to 273 only. Soo better stick to 270mhz which is rock stable indeed.




This post has been edited by nadeng1987: Dec 2 2007, 02:20 AM

AMD X2 4000+ brisbane G1 | nadeng1987 | Biostar TA690G | Kingston Value Ram PC5300 1Gb | Xigmatek S963

One thing i do not know bout OC skill is ram timing . I only set the divider to ddr400(instead of default ddr667). Do u care to xplain a bit?? pleeaasseeee..

Im having the same prob as you man. No need to play with ur vcore(for heaven's sake, ur using F3!! pakai default vcore pon bole cecah 3.0Ghz). It's just ur ram couldnt tolerate wit the speed anymore(eventho it is stil underclock). We both need to buy better ram la. huhu.


P/s: wonder why bro -pws- havent put me in the list after giving my details huhu. Maybe my OC result cap itik je kot.

This post has been edited by nadeng1987: Dec 2 2007, 11:12 PM

As bro -pws- wish. Here's again my ss.



Thanx for adding.

---

Added on December 3, 2007, 8:22 amhaha. wait for me to learn more bout ram timing or perhaps changing my ram, i might surpass everyone for G1 core. hehehe.

This post has been edited by nadeng1987: Dec 3 2007, 08:22 AM

bro xixo. here's the memset ss.

Now, start from here, wat do i do? erm.. CL5 means what bro?





Attached thumbnail(s)

orite.

U mean, i use the same divider(ddr 400) but then loose the timing to 5-5-5-15-20-2T?

ok. i know the risk. hahah. Ive done everything u told me aidy including the MAL value and trfc dimm 0. now wil try to start OC back. will update you my result later.

Thanx bro xixo.

bro xixo.

I did wat u told me to do. I set the ram timing to 5-5-5-15-20-2T byusing ddr400 divider. I set trfc dimm 0 to 195 and MAL to 10. Then i push the fsb to 273(initially at 270) and i cant boot to windows. Then i push up vdimm to 2.05 but stil couldnt boot into windows. I figured out maybe need to pump some vcore and i gradually add up some vcore till +0.050 then baru bole get into windows. But the system wasnt stable and cant even do super pi 64k. I reduce the fsb to 272 but stil couldnt get a stable system running. Then i add up vcore to +0.075 using 272 fsb baru system stable a bit but fail at superpi 4m.

By looking at this result, what exactly resisting me from getting higher fsb??

I had just finished my trial and error session. Apparently, i think my ram is limiting me.

I tried to start OC back from scratch(fsb=200Mhz), this time i set the multiplier to 10 and the ram divider to ddr400 so that it becomes 1:1. Set ram to 5-5-5-15-20-2T trfc0=195 MAL=10.

Everything went smoothly indeed until i went more than 260 fsb. Note that my ram was also at 260Mhz. Even 261 fsb, super pi 512K pon x lepas. I played with vcore,vdimm nothing worked.

FYI, My last OC the ram cannot pass 260Mhz as well, no matter what i do. The ram is still in its underclocked state but cannot go higher.
So weird lah . Rase cam nk campak my ram to loji tahi near my house .

So i guess the highest i cud go with my proc and my stupid ram for the time being is 2835Mhz with Fsb 270 X 10.5.

This post has been edited by nadeng1987: Dec 4 2007, 01:40 AM

yeah. i think so too. Might wanna try 533 divider after this. See how far i can go with the htt. But not now la. Now need to sleep huhu..

haiya.. why is it so hard to upload pics..

Finally!! Managed to reach 3.1Ghz stable!

After so many trials and errors, this is the best i cud get out of my system with current setup. It can go much higher, but didnt dare to add more vcore. Scared oredi.
Thanx A LOT to bro xixo_12. Without your help, i wouldnt be able to achieve this.
And now i managed to know a lot about ram timing due to own tweaking and your guide as well.
Thanx dude!!

To bro -pws- ,

Please update my new OC result.
Thanx a lot.

Aiyak. Ive been using this setting not just for benching lorr. Its for gaming as well. One thing bout using orthos to stress my cpu is that, TOO BOSAN WAITING FOR IT TO END huhu

Maybe if i bosan playin games then i'l proof this setup is stable enuf.

Dats not default vcore man. I added up 0.075V to the proc. Default vcore is at 1.296V for 4000+ brisby. I say it's stable bcoz it is la haha just kidding..

Might test this setup 24 hours later on. Now very2 malas to test it yet.

This post has been edited by nadeng1987: Dec 5 2007, 08:12 PM

thanx bro.
told cha i will surpass everyone using G1 core hehe

---

Added on December 5, 2007, 8:42 pmyeah.. its brisby G1.. not super f3.

I'l try to stress it 24 hours later on. Will update to you soon.


This post has been edited by nadeng1987: Dec 5 2007, 08:42 PM

thanx
I think it's bcoz i did LOTS of trials and errors during my OC and eventually the chip becomes better hahah..
Kinda funny bcoz initially i thot i had a very bad brisby. Cant even pass 2.6. That was the time i had not discovered ram timing yet.
Lots of thanx to bro xixo_12. He helped me with the timing.

Go and download a software name memset on the net. I for got which version is latest tho. Then you will be able to change your ram timing in windows.



This post has been edited by nadeng1987: Dec 6 2007, 12:03 AM