@DevilMan

690? very nice one. i dont see ur mobo temp gonna increase much. 40 degree is good i guess.

how high ur volt?
if the temp below 60C consider ok for 24/7 use

idle? include SS plz..
if u r running ok with both SPI n orthos.. u can use it for 24/7, based on my xperience try to blend ram n cpu in orthos, until pass the first test, then try to do SPI 32M, PASS????  n u r getting the great 24/7 use 

run one by one, not both ok.. from ur sentence i understand like that 
k good luck bro..

Coretemp is smart and simple..

Guys,to run F3 above 3.5Ghz need water cooling or not?   

for running 3.5 need to pump a lot vcore to gain stable here...
heat running out and cooling fan is not enough to maintain it ...
for normal log in windows is fine... but when comes to prime... it fail...
so i dun think it can be use in cooling fan.. unless water cooling..
for those can prime 24 hours with cooling fan... i will salute your cpu...

Got my "Spider" yesterday...

Will try to O.C. after sorting out few bugs
Phenom X4 9500 | shaunk86 | MSI K9A2 Platinum | Crucial Ballistix Tracer 6400 | Stock HSF

[attachmentid=352683]

Experience With AMD Phenom + MSI K9A2 Platinum
* I'm new to O.C-ing AMD Platform. Any advice is greatly appreciated. 

Having alot of trouble with the MSI K9A2 Platinum Mobo + Phenom 9500

- Cannot boot stright away with USB mouse. Bios will ask u to press F1 to continue. It says " No PS/2 mouse detected. ( I'm using USB mouse )
- Ram running at Single Channel 5-5-5-18@800mhz when my ram is rated at 4-4-4-12@800Mhz
- No Option to change HT multiplier
[ Vista ]
1. AMD OverDrive won't run
2. MSI's own Dual Core Cell doesn't work either
3. HT multiplier stuck at 5X
4. Tried to CrossFire with 2X Sapphire Radeon HD3870, Performed like a single card. Single Card 3Dmark06 = 9735 points. Crossfire 3Dmark06 = 11452 points. (Using Catalyst 7.11)

[ XP ]
1. Won't automatically shut down the pc. Instead  show " It's safe to shut down your pc now" and you need to press the power button to shut down the pc. Like those Pentium 1 & II days.
2. AMD OverDrive works, but cannot adjust a single value
3. MSI Dual CoreCell works, but reporting my CPU at 100'c

So far, best result is 2.47Ghz @ 225FSB @ 5-5-5-18 @ 900 mhz [ Bios OC ]
Primed for 30min. CPU Temp at 54'c with stock HSF

psu???aiya..st56f still not good r... what make my psu like that???

for sure now many ppl will choose TA690

need help, i'm going to build new am2 rig...witch one i should get for the proc...4000+ or 4200+ or 4400+ ??
my budget is around rm300..
what stepping is good?? gonna buy at lowyat..
going to OC just a bit..coz afraid my case will become hot...using the lian li v600..it will block the cpu..

Go for handpicked dblooi bro's one la. F3 3800+. But from ur siggy ur already using 4800+ ... Why dont use the present proc till Phenom stabilized ? I think its a while only until stabilized ....

Go for handpicked dblooi bro's one la. F3 3800+. But from ur siggy ur already using 4800+ ... Why dont use the present proc till Phenom stabilized ? I think its a while only until stabilized ....

received an email from bro KenLee yesterday night
he says he wanna inform me about his F3 oc result 
and he don't mind to share it v others
so i guess i will just post his result here 

clockspeed : 3487.7MHz
vcore : 1.440v
ram : 872MHz
vdimm: 2.17v
HT link : 1046MHz