Super Talent and TeamXtreem are both good in AMD platform overclocking.Seems like you are trying to look for those BH5 RAM is it ?

Geil Golden Dragon...I hardly see the RAM before,is its' performance as good as those SuperTalent and TeamXtreem ?

My friend used to own a 256x2 Geil Golden Dragon rams, can overclock to 280Mhz FSB 1:1 2.5-3-3-6 without any problems, he say still can go higher 1

280MHz on Intel Pentium 4 or AMD ?What's the chipset using on the RAM,sounds very nice for the high FSB value.

ya on stock, but i went to OC 3.4 also result not touch 10K..

now what this mobo want more??

raymond ...edit my system on member page can? mobo and ram change already

P4P800 - Duluxe
RAM 2048mb

but help me with this mobo... please..

Hm.. Actually i was hunting for some ram. Thats why im asking. Haha.. But i heard my friend says, SuperTalent wasnt use Winbond chip for their products. So, it wasnt comes with BH5 chip. Wander i that true or not..

P/s: Successfully modded my GC to XT.

This post has been edited by fylon: Sep 8 2007, 11:53 PM

He is using AMD....
I am not sure what chipset it is using too....its handpicked 5ns rams...but 280Mhz 1:1 at 2.5-3-3-6 is good

not that soon lah..got budget constraint somemore i want to keep my s478 rig as a torrent rig or smth but i doubt my parents will allow that

congratz hows the scores now?try to hit 500mhz on core and 800mhz on the rams lah



This post has been edited by pengster: Sep 9 2007, 12:30 AM

@pengster

Haha.. Dare not to say will archived the speed that u mention. But can try to make it thou. Run on 450/750 before, and it was artifact less for the card, so i assume it can hit that speed.

Well anyways, guys my new result..

Hit 3.75Ghz @ 3-4-4-8 timing. Gota lower then the timing to get this stable speed. Tried with 2.5-4-4-6 but unfortunately my system become not stable. Suddenly will restart.

To all s478 sifus ,

I'm on p4 2.4b at 2.65Ghz with 1 512mb kingston ddr333 and 1 512mb apacer ddr333 on 2.5-3-3-7 timing. My prime95 ran 8 hours with 1 error on the blend type of the torture test. Just wondering is my system stable or not.

280MHZ 1:1 is really really sweet. using AMD?? i think it must be 939.

is it worst than last time?? hmm.......but your 6800gt cant even touch 10k is quite weird.

you ly down your casing like that all the time??

maybe try 3-3-3-6 if your ram wont run at c2.5. nice to see that you can proceed higher and higher. hehehe....

Haha.. Unfortunately cant.. Tried before. Even run 512kb super PI also will restart. But can hit 3.7Ghz guess better already. Actually didnt know that the pro can hit that high speed.

I've updated already.Are you using 2*1GB Kingston PC3200? What's the RAM timing and Divider using on the mobo?

280MHz on AMD properly won't be go that high in Intel P4 Platform,i've read reviews on on AMD and Intel which are using same RAM and found AMD will always better in high FSB that Intel P4 platform.I think our chipset is limiting the RAM's performance.

Wao,3.75GHz.Finally you hit it.I've updated on the first page.

Do you run the speed on normal applications and gaming?Does it cause restart or any blue screen?If not should be ok ofr that.

@fylon
I think 3-4-4-8 is the best you can set if wanna achieve higher speed. Maybe you can try change it to 2.5-4-4-8 juz for testing since dropping from 3 to 2.5 would juz give a minimal difference.


@raymond
Mind to change my system too?
Team Xtreme 512mb x 2
Abit AI7
HIS x1950pro AGP


@zeipher
I guess still ok, perhaps try adding little voltage or loosen the ram timing?

if thats the case,500/800 should not be problem with the XT bios and Zalman cooler finally you broke the 3.6Ghz barrier too can't hit 3.8?

nolah,only when i play with my stuff but now lazy to put it back up.anyway i just added a 40mm fan on my NB.its freaking hot even on idle

Just a lil more to reach my score.
Try harder dude!

Haah.. Break 3.6G but cant get to 3.8G thou.. Tried with 251mhz @ 3-4-4-8 system cannot boot up. Gota reset bios. Vcore set at 1.55v, vdimm at 2.85v,vAGP at 1.6v & pci frequency locked at 33mhz and agp 66mhz. System cannot boot up. Guess the ram is hitting the wall.

Any clue? I had tried all i can..

This post has been edited by fylon: Sep 9 2007, 03:11 PM

@fylon

Have you try increasing the VAgp to 1.65 or 1.7V? Then give the VDimm bit more, maybe around 2.9-2.95V region. VCore should be normal but Prescott generates too much heat if too much voltage applied.

If not, guess the ram is at the max speed it can attained.

Cant.. P4P800 Deluxe max vdimm is only 2.85v... I wish i could up my vdimm thou but cant.

The last solution maybe you need to use diveder, 3:2 or 5:4 so the system is not to dependent on the ram.

I guess with divider you can get higher clocks?

That's what is limiting me......my RAMs can go higher 1...sigh
Compatibility not high with Intel...