Lol.. Both of ur LCD had killed me! Haha.. I was planned to get a LCD recently but the stupid AkuComel had blown out i gota spend for PSU now Haiz..

Yea.. I was now aming for the Real Power PRO 550Watt and Real Power 450Watt. Btw, do the 450Watt Real Power comes with 6pin PCI Express Power cord? Im just worried that if next time i swap to PCI-E but this PSU doesnt have the 6pin power cord then gota change PSU agn.

Lol.. Cannot! Must save up for UPS! Expensive eh.. Now invest more then next time dont need to wait suffer ma. Lol.. My place couldnt fit in 2 PC. If i migrate mostly i will sell off this rigs! Anyways, make up my mind. Will grab the CM real power 550Watt type! Since is SLI ready so no worry for further migrate.

Btw, HDD run half way and goes turn off is because of lacking power?

I think my current TECOM was having not enough juice problem. Dam.. Gota get new PSU ASAP now.. Worrying me. Scare HDD will burnt!

Lol.. Agreed with Edmin statement. We are from kuching bro. Not easy to find those good and rare thing here. XD By then, aiming for CM Real Power Pro now. Gues it will feed my rigs!

Where got loaded. Gota dig some coins from my piggy bank to exchange in order to get the PSU eh.

Yea.. As what u had says previously ma. Hurt now but relax after that. By then, read many review already, currently not much mobo and GC can really utilized the SLi power. So no point to going for 2 card by now. Maybe few years after then..

P/s: By then, havent check the price for CM Real Power Pro products yet. Update 2mrw after i asked.

This post has been edited by fylon: Sep 20 2007, 11:13 PM

@sang_karim

Lol.. Gratz! Finally can get back to the line! OC..? Wish u break the wall dude.. 4.01Ghz!!

Lol.. Break shawty 4Ghz record peeps! Smoke his record! Jkjk.. Later he saw this post sure chop off my head!

By then, just slowly lo.. Ur use the standard series mobo. Guess u will face some limitation like kabu does. Lacking some O/c setting in bios.

Lol.. 3.0E with stock voltage should me can reach 3.4Ghz if im not mistaken. Try up ur vidimm 1st.

By then guys, cannot get the CM Real power and real power pro at kch!! Stock havent arrived so cannot assume the price. So bad.. Guess gona stick to the problematic TECOM until next week.

@kabu
Icic.. But not as much option as dlx version right? Sang, o/c actually very easy one. Kabu knows more the us here! xD

Provided my TCCC & D43 can reach 270mhz lo.. Haha! By then, hard as well. Dont know my procs got the ability to clock to that speed or not.

This post has been edited by fylon: Sep 21 2007, 04:08 PM

Lol.. But it doesnt means that S478 were weak thou. There were still many S478 user around. Hm.. Its depend on u guys has ENOUGH with it or not ma right?

Hardcore of push the old school to their limits perhaps. Haiz.. No PSU yet. AVF dont have the stock for the one that im looking for. Gota wait next week then might got. What a bad news.

Btw, did u guys using AVR? I mean auto voltage regulator. Is that a necessary thing?

Lol.. Dont have that type of funding for water cool / DI cool! On air can hit 3.8Ghz is very very good already.

Was hunting for a good casing now. Now using the chapalang type. If change new PSU sure cannot fit in.

This post has been edited by fylon: Sep 22 2007, 12:20 AM

Lol.. Haiz. Just planning to grab a casing only. Now cant even find the PSU i want. So bad.. CM Real Power & Real Power Pro series wasnt available in kch yet.. Gota wait next week or next month they AVF dealer says. By then price unkown. But assume will more then 300 for those above 500watt.

Edmin, sell ur PSU la.. So i dun have to look around for it. By then, just checked ST400 the effciency are only 79% at MAX..

Wow.. 1.4 krpm with Zalman cooler? Thanks great.. Damn silent right? My hper6+ only mange to keep below 2k rpm thou. Idle will be 1.9k rpm while full load will hit 2.3k rpm. But mange to keep the temperature within 49-52'c during full load.

Me too. Haha.. But mine full load @ 3.75Ghz is around 51-52'c. For idle it will drop around 39-42'c. But ur cooler seems better then mine alot. Can main the fan RPM at 1.4k thou. R ur cooler using 10cm fan?

Ic.. Oh yea! Its hard to find S478 cooler nowadays. Due this socket is phased out in market already. But then, there were some like Zalman which comes with universal socket then it can fit for S478! Lol..

Haha.. But its depend as well. If cooler can support the new rigs socket that u're going to get, no harm to get it and apply now. Since both of the new & old system can be use. Save cost also!

Lol.. Dindnt plan to sell it off huh shinjite? Make it as torrent pc?

Ops.. What happened to ur rigs sang.. After changed the PSU u seems like having some problems! Maybe during the time u disassemble the PSU and accidentally loosen some pc parts? Hm... Is pity u can run dual channel atm.

By then guys, got a question here. As if in this case, i have 1.5G of ram. Which means, 2x 512mb and 2x256mb. Can i activate the dual channel function? Lets sey, Slot 2&4 for 512mb and 1&3 for the 256mb. Is that possible?

Ic.. Cos i just grab a pair of Corsair XMS, then plan to run 1.5G ram if can. Due wanna test vista ultimate.

Wah.. True? Meaning vista will be changed back into XP agian? Any source?