Haha.. Just edit my post then saw ur reply. Duh.. U got almost the same stuff as me.. When wanna show me ur 4.16Ghz record?

@pengster

Yo! Nice to heard that ur system can run stable with 2.7G! Atleast dont have BSOD.. Not bad!

@overclockalbert

Yea. Last night just try to reach that speed havent do any tweaking yet. Just loosen the timing to default.. Will try to tweak the system again when im free. But kinda impress that this proc can reach such high speed with 1.475v vcore. As my previous 3.0E need to pump until 1.5v in order to stabilized in 3.86Ghz.

Dont plan to get active cooling for ram as i would gonna rise the vdimm above 2.75v! Gonna save the active cooling $$ for something better. Maybe high CFM 12cm fan!

@herojack41

The Hyper6+ is smaller then BT.. Hm.. But u gotta have a good casing in order to use it. By then, there were some got interested with it already.

@kabukiawie

Haha.. Nop! 4GH will the limit.. The temperature is kinda scary on 4Ghz. Dont plan to put my rigs on risk! By then, 4GH will the history of my life with S478!

@edministrator

Haha.. Thats the step on with 4GH. Yet tweak the system to max and make it stabilized. Just raw result atm! By then, P4 should have the potential to be HTPC since kabu is going build his CTPC with 30' inch LCD!

@Ray

Thank you! Just hand itchy and try it out who knows dream come true!

@sang_karim

Actually u can break 4GHz easily with ur stuff. U have almost the same rank item as me. Same mobo, on par ram & cooler, proc almost the same as mine also.

Actually the higher speed the lower chance to OC. Like mine, i think i almost hit the wall already.

---

Added on November 15, 2007, 11:23 am@Sang

Haha.. I believe ur 3.0E can do better then mine! Go go!!

@Ray

Wanna join this hardcore OC?

This post has been edited by fylon: Nov 15 2007, 11:23 AM

@Sang

Haha.. I had say in previous post.. 4GH will gona be the hotest topic for now. Yea.. But anyways, try when u guys are free and WHENEVER u can. Dont force. No hard feeling.. If ur proc can 4G then it will be faster the mine actually, cos extra 1G speed.

@Kabu

Haha.. Encouraging huh? Yea.. I can see sang had invest kinda alot for his rig.. Maybe he can ask more abit from his system. Haha.. Dont waste the $$ than had been invested.

Haha... Bakar Jangan tak Bakar! Learn new thing! Yup.. Sang, since u had invest kinda alot for ya rig.. Atleast push more abit to satisfy and worth ur investment.

Duh.. By then, was looking for ThermalTake 12cm 78cfm fan.. Anyone know where can get it beside garage sales?

@Ray

Haha.. As previously i was using CL2.5 that why the PI score are slight faster. As breaking 4Gh barrier, i gotta change back to CL3. So, the result only faster by 1.+s.. If can tweak the ram timing again i believe the score will be slightly better abit.

Hm.. Ray u continue be the boss la! Better! Ur in the club? In the club of poor man or the club of OLD man?

@Kabu

Yup. Current fan cannot satisfy me yet. Due only running 1.3k rpm.. The CFM also kinda low due is just a normal fan. Unable to keep my monster below 40'c @ 3.6Ghz..

Haha.. Ray will die if he sold off his mobo. guys.. 40post to get V5.. Guess new thread will be born soon.. Very very soon!

@blonely

Yea. Its hard to find. By then, leosia not gonna sell his mobo at low price. I had pm him before actually. Atleast 250 & above i guess. As his mobo is one of the legend S478 mobo.

This post has been edited by fylon: Nov 15 2007, 02:40 PM

If u just wanna do 10% oc.. P4P800-X will be the suitable board for u. Otherwise, if u wanna break 4GH.. Then u need to get leosia board!

Haha.. Actually is not easy to get those old school stuff. It depend on ur luck.. As for me, i take 1 week to rebuild my new system after the previous one is burnt. Take ur time..

@albert

Hm.. Full load during SP2004 hit around 48-51'c maximum. Well.. I was using 2 90mm to draw the heat out from the casing and 2 80mm to pull the air in. Urs more like a gem if compare to mine. 2.8 @ 3.8E By then, usually a high speed proc wont go so far. Can hit 4Gh with low vcore count very lucky already.

About the fan, im still looking for it. Maybe TT the 80cfm will do already. Since my room kinda small, if pump on a 100cfm fan i cant sleep during torrenting.

Woah.. Someone's hand god itchy! Edmin edmin.. Starting pushing ur rigs already? By then, i believe ur at least can be push to 3.7 like what raymond had did.

---

Added on November 15, 2007, 11:32 pmOkies.. New PI record with some tweaking.

CPU: 4.017Ghz
FSB: 251Mhz
RAM Timing: 2.5-3-3-8
Ratio: 1:1
PAT: Disable
Vcore: 1.485v
Vdimm: 2.75v
vAGP: 1.6v
PI Score: 33.532s
Idle Temp: 48-49'c
Full Load: 50-53'c

Screen Shot:


P/s: No time for priming yet. But able to play C&C 3. Reducing the CL does make alot of changes in PI Score.

This post has been edited by fylon: Nov 15 2007, 11:32 PM

@Sang, Kabu, Ray & blonely

Haha.. Yup! New result again after tweak the timing. But then, i still unable to on my PAT on this speed. If PAT on, i cant even on Everest. Terus got restart. But if PAT disable, then no problem. 33s? Got time wanna tighten the timing and see again.

Its ok ray.. Take ya time. Not everyone were free ma.. Haha! V5 soon.. Mana boss dia?~

Sang.. Mana ur result? Haha.. Atlast 3.8GH ma.. But do it when ur free la! Haha.. Just some entertainment see how far ur rigs can go actually. Testing purpose.. XD

By then guys, any reliable priming software? SP2004? Cant really trust Orthors!

@blonely

What test are u taking? Btw, i dint see u make any thread of buying S478 item in garage sales. Why dont u try ya luck with open a thread there? I think it will be better if u do that.

@Ray

Haha.. Gotta see got any volunteer wanna be the boss or not. Otherwise, maybe u continue be the boss! 9 more post to get V5.. V5 will born today! By then, ur owning a legend mobo, no doubt can push ya proc go higher. Whats ya mobo max vidimm?

C&C 3? Yea.. But if set to ultra high my GC will still lag the game. Im currently using the high setting only. A step lower then ultra high. Not enough juice.

@blonely

Ic.. Where is khai84siong? Dint heard from him for quite sometime. Missing already? Getting new GC? X1650XT? Hah..

@herojack41

U mean for Asus mobo? Yea. There was, but nothing much can expect from that setting. If im not mistaken, if just tighten the North Bridge timing. I set mine to standard a.k.a disable it. Dont really high if u wanna oc to high speed. Timing to tight might cause error.

This post has been edited by fylon: Nov 16 2007, 09:47 AM

@herojack41

North bridge is one of the component inside the motherboard. Google it for more information. Its kinda technical thing.

@blonely

Ic. No wander dont see him around all these day. Was wander how his system now.

Haha.. Time for new thread. V5 is borning..

@herojack41

Anyways, north bridge are always come with heatsink. What mobo are u using? It suppose to have the heat sink. Did u see wrong? North bridge is on top one. South bridge then is located and below. Which is somewhere near to the pci slot on ur mobo.