Lol.. Google for Orthos that will be more better then SP2004 IMO.. Hm.. Its dpend on u. U might try change the ratio to 3:2 1st and see the sytem is boot able or not. If bootable then get into windows and run priming program.

By then, what is u idle and full load temp for 3.75Ghz?

xD... Im out dude. Let sang carry the mission forward. Yea.. He did a good job thou. Can hit that speed, might becos he was running on 3:2 thats why can push higher. As for me, i used to aim for PERFECT. 1:1 ratio, tightest timing with the fastest speed! Thats what im request from my rigs!

By then, 1.5v will be the max vcore for Prescott core. Dont over that line..

@kabukiawie
Haha.. Scare already. Later dead then gota migrade. By then, now dont have much time for OC. Its not a fun job thou.. Drain time for make it work! Wait my XMS arrived then see how. Gota pick up PSU 1st! XD

@sang
it should be ok for rising ur vcore to 1.475v. Mine i dare up ttil 1.55v before! As long as ur PSU can continuesly supply the current and good cooling it should be ok. Did ur casing side panel is taken away?

@albert
I think sang's temp is quite ok. I could reach that in a normal ambient with full load. Without aircon thou.

@colin
Prime95 Multithread is the latest one? Wanna try it after i got my PSU back to line!

Power supply almost kong already? Not enough juice...

By then guys, i found something weird wanna ask here. From what i read at OCZ website, they claim that their DDR Booster allows VDIMM adjustments up to 3.9V. Is that means, the booster itself can supply up til 3.9v vidimm to the memory without mobo control? Meaning if by using this tools, we can adjust the vidimm by our own instead of set it at bios?

Source: Click Here

P/s: Gratz for ur achievement. But stay tune when ur doing priming.. Error might just pop out in a sudden and sweep away all ur mood. Btw, if can, do priming for more then 12hrs then can estimate ur rigs is stable or not. 20mins-2hrs somehow still unable to clarify ur system is stable.

This post has been edited by fylon: Sep 25 2007, 12:11 AM

Ic.. Yea! I just wander how the ddr booster works actually. Due read from the website claim that user can fully adjust the vidimm as they wish. Haha.. Anyways, my xms havent arrived yet so i duno whats the chipset will it using. Actually get that ram is not for mainly for oc purpose. But just to cut the my ram stick from 4 stick to 2stick. For me, can get 3v for vidimm wil be enough for already.

As if im not mistaken, from the picture of the ram i found that it was xms v5.1, might be using Vitelic 5ns chip.

@sang
As albert says before, P4 system prefer loosen timing then tight. Dont get too tight for ya ram. But anyways, is glad to see ur high such high speed. Wait i got my psu back to live. :

Yea. Loosen timing give better response time. But somehow, tight timing were limiting u to reach high speed. As for my rigs, i need to loosen my ram to the loosen timing in order to reach 3.75Gh with 1:1 ratio.

Haha.. Anyways, IMO all those benchmark score wasnt means anything. Just a guide to tell u about hows ur rigs performance. As the score is different everytime u run it.

Haha.. Well well.. Im just handy itchy with o/c now. tempting me.. Just dam got not enough $$ for PSU. Gota wait until this sat then can get it.

Haha.. Cannot yet! My cooling is only left 50% life now. Dont have the potential to get 4G with air cooled.. Plan to sell off my Hyper6+.. Hehe!

Lol.. Just got my ram! Confirmed is was using Vitelic 5ns chip.. Waiting for PSU only right now.. By then, was running dual channel for 1.5G of ram. Not bad.

Gratz. Nice PI score. 36s.. Haha! Hm.. Value ram can hit 250mhz speed count not bad already. But just bad thing is cant run on 1:1 divider. Which means, u got high speed but low bandwidth. Hm.. Run prime for atleast 3hrs and see what happening.

This post has been edited by fylon: Sep 25 2007, 10:14 PM

@albert

Opss.. Sorry! Forgot about sang_karim was running on 5:4 ratio which means his ram was clocked at 133mhz before he start clocking. (correct me if im wrong). Thus running on 3.75Ghz was the proc itself yet not the ram. nless he was running 1:1 ratio then the ram and proc was on par.

@sang

Since when become so hardcore? Haha! But anyways, good to see ur having a good result here. 1:1 ratio at 215fsb has rebooted u? Pity.. Seems like u better keep track at 5:4 in order to hit high speed!

Lol.. Hm.. Just wander.. 1:1 lousier then 5:4? Hahah.. Cos mind 1:1 PI only 38s something only. At the same speed as sang. 5:4 low bandwidth but better speed? Gona try this out next week when got my PSU.

Haha.. The PSU was in front of me now. Ordered liao. Just need $$ to bring it home!

Lol.. Was just wander due to compare my pi score with sang. 1:1 ratio give me the fastest is 38s. But sang run at 5:4 can hit 36s. @ same speed thou.

This post has been edited by fylon: Sep 26 2007, 11:39 AM

Lol.. Welcome busta_dude!

@sang
Reading error perhaps? Like that time kabu 9550 GC 3D mark reading id more then 10k!~ Nways, is really a sweet speed for 1m @ 36s!

Opss.. Should me raymond GC not kabu! Haha.. Anyways, just rmb one of our member is having some weird reading with thier GC.

@kabu
Cannnot lo.. Gota wait got pay 1st then can grab!

@ray
Dont just watch movie la.. Haha! Take part also ma.. XD

Wah.. Cannot la.. We not movie maker! Anyways, i will left the show to sang i gues! Haha.. My cooling almost kong cannot OC too much. As AllnGap wasnt free atm so my deal with him will be postponed. Sang, the show is depend on u lo..

Yo pals.. Guess im using the same ram as u do. XMS!! Haha.. Whats ur ram rev? Mine was v5.1 and using Vitelic 5ns chip. Hm.. Using SATA cannot oc? Sure.. Die.. Gota make sure of this case 1st due im gona get a SATA for primary! Guys.. Any one can clarify this case pls? Hm.. Letting go ur 68GT? Unlockable? Might interested..

@kabu
Ur sata set as primary windows drive? Or just a slave/backup? Or ur PATA is the main drive?