Lol.. Want to OC.. Atleast set u vcore til 1.45v then slowly raise ur fsb. If can, set ur vidimm to 2.85v for safety. So ram need high voltage then can operate at high speed properly.

IMO.. Its depend either do u have the budget to migrate. If got, do make a move a learn something new over there.

@sang_karim

Hm.. Before do that, i mean up vdimm and vocore do make sure ur cooling system can function well. Always rmb, more voltage more heat produced. As for me, i will always make sure the system will get enough juice before pushing it. Thats why i always up my vcore and vdimm at certain level before start the OC job.

Or u may try up the fsb slowly either is 1 or 2mhz step by step until the system become unstable then start do tweaking on ur bios such like up vdimm, vcore, change the ram timing and so fort. But that will cost u alot of time thou.

Well.. Here come a good guide for how to OC for beginner! Hope u learn from SIFU albert here! Jk..

Hm.. Look for DRAM speed / DRAM frequency under ur bios option.

The sequence should be in this if im not mistaken.

FSB:RAM

200:200 = 1:1 Ratio
200:166 = 5:4 Ratio
200:133 = 3:2 Ratio

* Correct me if im wrong!

This post has been edited by fylon: Sep 23 2007, 11:28 PM

No la.. Is just the normal XMS nia.. Get it for RM160 include postage. Got that money after sell off some spare part ma.. Haha! Cos now using 4 stick ram really hard to OC.. Thats why i changed to 512mb 2x.. More better!

By then.. Still waiting for the PSU to arrived. Really poor already..Haha! 79GS still far away..

P/s: By then.. Somehow put some time on garage sales u will found some good thing in cheap price! Thats how i grab my part!

This post has been edited by fylon: Sep 23 2007, 11:37 PM

Haha.. Dried already now.. Donate me some eh? Jk.. Hmm.. Not really sure yet. Due i wanna try see whether i can run 1.5G ram with dual channel or not first. If can i might just let keep 2 of them and let go the rest.

Otherwise, will let go all four sticks. Why? Interested?

Haha.. Nways, after i grab the PSU. I guess it will be the last thing that im gona invest on this rigs. Not going for 4Ghz as well.. Risky! Bomb PSU once now scare already. Just wish can get back to old time 3.6G with slightly more tighten ram timing will do already. As u had says, better save up for other better thing ma. Guess i gota send the 79GS back to the supplier!

Haha.. Well.. S478 really bottleneck that gc alot.. No point to pump on that card. Good gc pair with a bottlenecking procs wont produce good result. XD

Yea.. If got then chance then grab a 73/76GT will do already. By then AGP version wasnt that cheap. Galaxy 76GT cost around RM400 for new set @ AGP slot. Gota think quad time before planning to buy it.

Yea.. Working now not much time for gaming. Better save the time for sleeping! Hehe..

Haha.. Icic.. Ok! I will try once i got my new ram! Hm.. I know.. But somhow the procs were bottlenecking the GC ma.. Even though can play game smoothly doesnt means P4 procs can fully utilized the gc.

By then.. Ofcause is a good deal to invest on this high end gc.. But $$ also one of the factor. Dont forget..

@raymond5105

Sorry for ya bad news raymond. Hope u be fine.. Cheer up! Yea.. Know that. By then. For galaxy product i can get it easily from my supplier. Can check before purchase it. RM380 @ lyn is a cheap price liao. Me here, check with dealer without markup price also cost RM410..

Yea.. Well.. Kch price are lidat lo.. Haha! If u wanna get one do tell me. At least i can get dealer price!

Haiz.. Just got call from supplier.. No stock arrived yet for the PSU. By then, i found a company at kch here is bringing silvestone products..

Lol.. No la! Just now browse the dealer list and found that. Anyone interested with Silverstone products can tell me.. I try to dig for u guys! No $$ now.. Haiz.. Wander wanna get CM iGreen or ST50f. Seems both of them are almost having the same price range.

Haha.. Yea! Kinda.. No $$ thats why need to make the WISEST decision lo.. Plan to take this PSU for long run ma. Haha.. Wanna make some comparison before make my mind.

Lol.. Random pick later half way bomb then die agian. Haha.. Well.. Was aming for this 3. CM Real power 550W, CM iGreen 500W and ST50F. 3 choose 1, abit hard.. Lol.. For that XMS just for cut down the OC ability for rigs la. Wont fire too high for it thou.

This post has been edited by fylon: Sep 24 2007, 02:48 PM

Lol.. Gt the same thinking as u do sang! Due that Real Power 550 only 75% efficiency max only 80%. Guess i take the iGreen 500W will do already. Since it were all pre sleeved.

P/s: iGreen 500W RM380...

This post has been edited by fylon: Sep 24 2007, 03:14 PM

Lol.. The price are too high! Saw at Modernopc only cost RM330, include shipping also 360 the most. Save back 20 thou. Sweat lo.. ST50F now no stock.. Phone the dealer already. Need wait place order. Since igreen cost more the 350.. ST50F sure around that price la..

Lol... Yup! That alot for me.. Last option is to check the Power Series 550W.. If still over 300 then i will go back to real power 450W de lo.. RM245.. By then that psu is good just lack of a pci-e power adapter only!

@sang

Yea.. Do share abit about ST400 ma.. Good?

P/s: iGreen 500W at moderno only RM330..

This post has been edited by fylon: Sep 24 2007, 03:49 PM

@sang

I checked that already. Haha.. ETA is 2-3weeks le.. Now is open for booking only. Wait until that time my rigs die liao.. Cant wait to get PSU to fire my XMS eh! Think get the real power 450W will do already.

Yalo.. Always need to find alternative way! Haiz... We need airasia to get there! Duh.. Guess just grab that 450W will do already la.. 80% max efficiency should be alright..

This post has been edited by fylon: Sep 24 2007, 05:14 PM

Yea.. Just grab that 450W ok liao lo.. Bopien.. Hahah! well.. U going to KL edmin? Grab me some casing! Jk..

Yea.. The one with blue fan and power usage meter. RM245/250 lidat. Dont the AVF got raise the price or not due that day i ask is old stock. Interested? Nah.. Jk la.. Anyways, planning to get CM Centurion 5. The one with all black edi. Hehe.. Here got! No worries!

Wow.. Ur firing ur rigs up man! Good result.. 3.75Ghz.. Good result! But ur rams speed seems kinda crappy. Try change ur ratio to 3:2? Running on 5:4 were giving low bandwidth thou. Haha.. Can hit that speed with 1.45v core sounds not bad. Mine last night need to up until 1.535v then mange to maintain the stability.

I always prefer to run on run speed, 1:1 ratio! But its hard to achieved due need to push the ram speed same as the procs.. As for me, i will always run stability test 1st. Cos if ur system can pass the stability test means its stable at that speed, thus no worry that u cannot get that speed.

By then, what program are u using for test out the stability sang? For me, i used to use Orthos! Its will automatically detect how many thread and ur proc has and prime both of them at the same time. And also, if can, do ur priming at priority 10. To fully test out the system. Give 100% burn in.