Lol.. Discussion ma.. Comparing which is better lo now.. Hm.. I knew that E2160 is a o/c gem thou. Haha.. Ppl was calling it as a beast! Can hit almost 100% o/c.. And the performance not lost to E6600 if im not mistaken. Just lacking of the cache memory and FSB are rated at 800mhz only. Otherwise, overall is a good proc.

XD... Anyways, P4 not bad too.. Can stay for almost 5yrs and still have alot of supporter.

Lol.. Just away for a while then the thread is getting loaded. Yea.. Guess my 3.0E can push more if got a good PSU. Since with AkuComel already can hit 3.75Ghz.. Guess if got better one, sure np to get 4.01Ghz.

@khai84siong
Hm.. From what i read from the article.. Most of the ppl says that D0 stepping procs are much more cooler then the previous C0. Due the pipelining of the procs has been improved so will produce lesser hit. As for mine, i was running on D0 stepping. Guess what? My idle temp on stock speed is below 36'c with Hyper6+.. My NB somehow hotter then the procs. 38'c thou. By then, i know stepping wasnt affect much thou. Mine D0 could break the 3.6Ghz barrier.

By then, might wan to sell mine rigs if i strike TOTO or 4D Magnum la! No $$ for changing.

@kabukiawie
Actually is havent enough with the old rigs yet. Guess we all are trying the break the wall as chriswoo says. Heh!

Lol.. Was his fren and him eying my mobo! Yea.. Just break but havent go trough it ma.. Right? Lol.. Btw, ya mobo consider ok right? Should can help u archive atleast 3.5Ghz? Maybe PSU? Like me..

Ic.. Lacking of bios OC selection? Hm.. That sad. Sorry for that. By then, have u every try 5:4 with 3.5Ghz? Can goes that high with 5:4 ratio? Ur running on 1:1 now right? Haha.. Abit greedy like me. Die die also wanna stick with 1:1 even with loosen timing.

Aikz.. Pity! Hahah.. Seems like really ya mobo limiting u to hit high speed! Haiz.. Even with the most loosen timing on ur ram and running on 5:4? Sad news! Sell off ya rigs and go for E2160!! Jk jk!

Haiz.. Bored with no o/c life.. Cant do much thing beside surfing and watch movie thou. With 3.75Gh last time only manage to keep 30fps+- for C&C3, now with stock guess will get lower than that. NO GAMING!!

Was using ATI tools. As im using ATI card. Run it before start any game, then it will capture the fps of the game that ur running on. Yea.. The resolution were set to 600x800 with all medium setting. Hm.. The lag was cause by the system i guess.

@kabukiawie

Lol.. But anyhow, now want to o/c also cannot. Haha.. Using Tecom UPS now. No deal for any o/c related issues!

@shinjite

Yea. That stepping was made for P4 EE if im not mistaken. From what i read from the some website. There says that those P4 with M0 stepping was actually P4 EE but the procs failed certain test and thus they disable the L3 cache and sell it as normal P4 chip to cover the losses. But is true or not..

Lol.. How rare can u imagine for this type of procs to be availabe. But anyways, other stepping does well also. No doubt. XD

Edit: Some advises are needed before i make a jump for HDD. Our S478 mobo can detect maximum how large of HDD capacity? I was browse through the forum and found some tempting 320GB hdd but was worried could my mobo detect it or not.

This post has been edited by fylon: Sep 19 2007, 09:53 PM

Wow.. Edmin is here! xD Ic.. So, 320GB shouldnt be a problem huh.. Great news! 10 more days to go.. Waiting salary payout then can grab a new HDD! 30caps procs should ne can get better result in o/c right? Maybe mobo limiting u?

Wo.. U're 7600GS? Sounds good for this card to play on latest game eh! It makes me think fo the 79GS that i had ordered yet lie at shop store there!

Lol.. Diam diam aje! Haha.. Ic.. Hm.. How much had u o/c ur procs? Seems its satisfying ur needs, i guess it should be more then 3.3Ghz o/c right? Just an assumption thou. Hah..

Which manufacturer are u 76GS? Seldom can see 76GS with DDR3 thou.

@edmin
Wah.. 10% already enough and satisfy ya needs? Lol.. Guess im one of the HARDCORE dude here.. Keep pushing & squeezing juice from my system. Oh yup.. Makes my rigs alive with that TECOM PSU now. With 0% Oc lo.. Due my GC consuming more juice already. Haiz.. Owh? CM real power series? Izit those iGreen type? Guess my work place there got few. 2rmw go spot the price..

@kabu
No la.. If i dump all my salary into my rigs than i early early arleady get the HDD and PSU liao. Just anways, not enough budget then gota wait payout ma.. Haha!

P/s: Btw, RAPTOXX PSU good?

This post has been edited by fylon: Sep 19 2007, 11:23 PM

Lol.. Was take some time to survey on that RAPTOXX PSU just now. Seems like is kinda solid thou. got 3 +12v rail and 85% efficiency.

By then, yea! Will check the price list of the CM Igreen and CM real power series 2mrw!

Lol.. Just go store checked the CM real power series PSU. 450Watt cost me rm270 eh.. Hm.. Was thinking should i get CM real power or the silverston ST400...

@overclockalbert
Hi bro.. Thanks for the reminder. Yup. Do do some research last night and found that raptoxx wasnt that reliable.

@kabukiawie
Aduh.. Kch where can found those rare stuff.. Haiz.. I was aiming for the cooler master real power series lo.. As recommended by Edmin..

Haha.. Not wo.. ST400 wasnt available in kch.. My shop here only Gigabyte, antec, CM and other cap palang type lo.. Hm.. Not so worth to get PSU from bulk imo! Cos usually good PSU are dam heavy.. Plus in the postage the price are almost same with the price here already. XD

Yea.. The CM real power series kinda sweet! I saw at my shop here lo. It comes with a voltage meter also.. Can place in floppy slot..

Aming for this one. >> Real Power 450Watts. Later wanna go down check with the AVF dealer see got stock or not!

This post has been edited by fylon: Sep 20 2007, 12:01 PM

@sang_karim

Hm.. U sure everything has been placed into their place properly? Usually replacing a PSU does not require for format windows one le. Try unplug everything and reassemble it agian.

By then guys.. I found my cooler master PSU already. Real Power 450W (RS-450-ACLY). RM255...

Lol.. Search til the supplier warehouse to find this psu. Hm.. Havent get it yet. Not sure what will be the package. 2mrw i guess. Not enough cash on hand and saberkas dont have maybank ATM. Gota wait lo..

This post has been edited by fylon: Sep 20 2007, 02:54 PM

Wah.. iGreen got 450Watt meh? I thought only 500 and 600?

Haha.. Kabu.. No $$ arh.. Still got 10 more days to go before got pay oh. Haiz.. Need to check iGreen 500 Watts price agian.. I think it should be cost more then.

500 and 430 not much different right? Wanna cut cost!

Lol.. Haz.. Just now when to 3E survey and found the enermax liberty and FMA.. The price is killing! Really when see it. around 400+ for 450Watt type.

By then, was consdering few CM real power PSU thou. Haha.. Cannot make my mind. iGreen 430Watt, Pure Power 450Watt, Pure Power 550Watt and Pure Power Pro 550Watt. Guess my tECOM cannot stand longer. Im now having problem with it.. The HDD will suddenly stop spinning for sometimes. Gota change the PSU ASAP. I dont wan to burn my HDD.

Lol.. Ur work station is killing man! S478 still ass kicking! Yea.. Wanna ask the supplier about the iGreen 430Watt. By then are ur supplier direct to kch local AVF warehouse? If same then i guess dun nid to ask already. Hahha..

450Watt seems good for me. But if can, i would like to go for Real Power Pro 550Watt thou. That really tempting..

This post has been edited by fylon: Sep 20 2007, 08:19 PM