@kabukiawie

Lol.. Hard to find floppy now. Not much ppl use nowadays. Later wanna go my fren's hse dig..

@pengster

I guess my card got alot of head room to go. Thou.. See my latest result. 8.1k. Seems like the card core & memory can hit very high speed with hynix 2.8ns chip without artifact.

Core: 460mhz
Memory: 780mhz
Temp: 42'c (Well do in at early morning, so temp sure drop abit. )



Pls: If wanna see the benchmarks analysis. Click here.

Haha.. Nop. Cos my GC comes with RAM sink on it already. So i didnt use the one that comes with the zalman fan. Then i paste the zalman ram sink on my NB lo. the ram sink comes with thermal sticker on it. So no worry! Hah!

Haha.. That 8k score is with 98PRO original bios without modding. Guess will get better score if modded into XT bios. By then, this card really can go very high on core and memory. Alot of headroom for hynix chip. Push the core speed from 380mhz til 450mhz still no artifact found. So as for the ram, from 680mhz til 750mhz. Still running fine artifactless. Damn happy with the result.

Yea.. Finally manage to drop my NB temp. Without ram sink is around 42'c lidat. Kinda scare with do priming. But now it drop til 39'c consider ok liao..



@GCI99

Bro, u using p4p800 or p4p800 deluxe? Haha.. Thats weird.. Play around with ur ram setting? And try push ur proc higher. That helps getting better score thou.

By then guys, Geil and superTalent brand, which one got better OC ability?

Haha.. Yea! I think about that too. Its surprise with i see the result.. By then need to rescue my floppy 1st. Then can mod it.

By then i think my NB temp drop is due to the zalman fan. The fan comes with power air flow thou. The air blown on the NB thats why temp will drop.

Ic.. Bcos my fren wanted to sell his ram ma. Then i ask, which is better. Guess like i have to choose between supertalent and xTeem.

Hm.. Actually i was hunting for some ram. Thats why im asking. Haha.. But i heard my friend says, SuperTalent wasnt use Winbond chip for their products. So, it wasnt comes with BH5 chip. Wander i that true or not..

P/s: Successfully modded my GC to XT.

This post has been edited by fylon: Sep 8 2007, 11:53 PM

@pengster

Haha.. Dare not to say will archived the speed that u mention. But can try to make it thou. Run on 450/750 before, and it was artifact less for the card, so i assume it can hit that speed.

Well anyways, guys my new result..

Hit 3.75Ghz @ 3-4-4-8 timing. Gota lower then the timing to get this stable speed. Tried with 2.5-4-4-6 but unfortunately my system become not stable. Suddenly will restart.

Haha.. Unfortunately cant.. Tried before. Even run 512kb super PI also will restart. But can hit 3.7Ghz guess better already. Actually didnt know that the pro can hit that high speed.

Haah.. Break 3.6G but cant get to 3.8G thou.. Tried with 251mhz @ 3-4-4-8 system cannot boot up. Gota reset bios. Vcore set at 1.55v, vdimm at 2.85v,vAGP at 1.6v & pci frequency locked at 33mhz and agp 66mhz. System cannot boot up. Guess the ram is hitting the wall.

Any clue? I had tried all i can..

This post has been edited by fylon: Sep 9 2007, 03:11 PM

Cant.. P4P800 Deluxe max vdimm is only 2.85v... I wish i could up my vdimm thou but cant.

Haha.. Looking for vdimm mod! Jk jk! Wont do that.. Too danger.. P4P800 Deluxe is rare board thou. Hm.. I guess the ram had reached it limits. Tried with 3:2 & 5:4 mange to boot the system up but cannot prime. Dont even 1mins prime then goes restart. Guess i better stay a 3.6Ghz lo.. Due i want to have 1:1 ratio and stable system!

Haha.. Nop! Now going back to 3.6Ghz the most stable setting. Due can push my memory timing to 2.5-4-4-6.. And i wanna keep at 1:1 ratio.

Ic.. Hm.. Ya memory setting too tight? witting something to ROM?

Hm.. Seems like not really a good option to get high performance ram huh? Haha.. Guess i have to changed my mind of getting better ram thou.

Lol.. Now times for ram & chipset discussion? Yea.. All those good ram needs higher voltage to operate. Too bad for my mobo max vidimm only 2.85v.. Nothing much i can do. No point to get performance ram thou.

Uh.. Turn off PAT? Alright peeps.. Thanks for the hint. Go back try mine.. Thats remind me of my PAT is enable. Maybe that caused me cannot go over 251mhz..

Lol.. But can get 300mhz extra is a bonus already. Dont too sad thou.. Cheer up.. By the way, i guess i had found the sweet spot for my rigs. 3.67Ghz is the most stable speed i can go. Of cause i can go higher with change the ram ratio but i still prefer stick with 1:1.. So 3.67Ghz is the best point to stick with. Since my mobo cant give more then 2.85v vdimm guess is no point to get performance ram and push higher. So i let mine stick with this speed.

Woah.. Just tried C&C3 TW.. My system only can maintain 30fps eh.. During war drop until 20+... Gosh! Just on all medium setting only.. Dawn of war i still can maintain 40+ fps! So bad.. Need more juice from GC! By then my torrent sux.. Cannot try the H264 movie.

Lol.. Atleast u got 300mhz extra for stock volts ma.. Try pump in some vcore. I guess it should can help u get further. I pump mine until 1.485v eh..

Gratz! Ofcause, more ram means higher chance to fail OC. Due more ram chips are been use thus one of the chips failed to operate at the speed that u had set then consider OC failed.

Whats ur idle and full load temp for 3.6Ghz? Make sure u got backup cooling system for ur rigs.. On 3.6Ghz makes lotsa heat out.

By then, i dont use the front audio panel wor.. This u might need to ask bro shawty eh..

Hm.. 3dmark usually used for test GC.. Try run stress prime / orthos to burn ur procs to test the real stability of ur rigs. U can get it here thou. As for me, i would stress the RAM and procs together with priority 10..

Downloaded the H264 movie... Hehe.. Tonight go home see hows my rig perform on this type of media file.

Ic.. Ray how much do u pay for the HDD? Capacity how much?

Ic.. Not bad thou. RM299 get an OEM hdd.. Haha! But its too much for me. 250G count as overdos for m e already. Lol..

By then guys, how to check the fps when running some movie? Because i wanna see my system can give how much fps for the H264 video..

Thanks for the info! Just try the video.. Running at 3.67Ghz @ 90%+- CPU Usage. FPS is less 25< Average is 23.. For certain scene it drop until 18..

Addon: Dont what media decoder i was using. Well just know when i run the movie, there were a "Haali Media Splitter" icon appear on my task bar. Guess will that be the decoder?

This post has been edited by fylon: Sep 13 2007, 07:45 PM