I see...

Actually I did walk in yesterday and the CS said if sign with them then they will follow up. However since I sign online, then need to refer to official digi store. Thanks for sharing though... appreciate it.

I don't know how to check if it's public or private IP

I am able to download movie from popcorntime, so I presume torrent is working

what result of speedtest? got full 50mbps/20mbps or lower?

Pay only RM130. Postpaid line is optional, to take or not it's up to you. Same like Maxis One Prime.

Just go to Digi store and apply. Their system cannot check if you are doing switching hence when they call they assume it is a new application. So when new application, and in their system your port is full then they will say so.

You do wrong process bro. If you terminate and apply new, it will take at least 1 month for Unifi to clear up your termination. Should have gone through switching instead.

What model of Zte router? Can share speedtest to few server e.g. Singapore and Europe?

Speed test fluctuating 50-52mbps

Zte ZXHN H198A
Singtel server only 7mbps

Can try pinging these servers and help report results here:


Open a terminal on your computer and ping each one?

Windows: ping -n 10 <address>
Linux: ping -c 10 <address>

Cut and paste the average rate for each server here.

Thanks!

This post has been edited by Candy12: Oct 23 2020, 11:35 PM

did digi fiber gives public ip? I am interested to register as my unifi bill went up this month

This post has been edited by s9sa: Oct 24 2020, 03:49 PM

OVH Roubaix France: fr-ovh-roubaix-02-10g.nperf.net
Minimum = 267ms, Maximum = 362ms, Average = 311ms

Linode London UK: speedtest.london.linode.com
Request timed out

M247 Manchester HQ UK: speed.uk.man.m247.ro
Minimum = 206ms, Maximum = 313ms, Average = 266ms

AltusHost Amsterdam NL: nl.altushost.com
Minimum = 171ms, Maximum = 253ms, Average = 210ms

Ookla Seattle USA: sea.host.speedtest.net
Minimum = 190ms, Maximum = 297ms, Average = 237ms

SFR Paris FR: speedtest.mire.sfr.net
Minimum = 202ms, Maximum = 294ms, Average = 244ms

Salt Switzerland 100G(One of the FASTEST in Europe): ch-salt-zurich-01-100g.nperf.net
Minimum = 254ms, Maximum = 387ms, Average = 301ms

OPEN SINET Project 20G Tokyo JP: speed.open.ad.jp
Minimum = 83ms, Maximum = 84ms, Average = 83ms

China Mobile HK: speedtest.hk.chinamobile.com
Minimum = 46ms, Maximum = 48ms, Average = 46ms

OVH Singapore: speedtest-sgp.apac-tools.ovh
Minimum = 80ms, Maximum = 388ms, Average = 111ms

Newmedia Express SG: www.speedtest.com.sg
Minimum = 14ms, Maximum = 15ms, Average = 14ms

AIS Phayathai Bangkok TH 100G Server(First 100G public Test Server in Asia):
th-ais-phayathai-01-100g.nperf.net
Minimum = 34ms, Maximum = 35ms, Average = 34ms

Would like to know how is the installation for a apartment? is it the same as unifi where a telephone cable connect to the house telephone port (at one end) and then connect to the modem (at the other end)?

Thanks for helping out with latency results. Here's mine as a reference for using a Maxis home fibre line as comparison.

My current location is Ipoh. It's some 200km in distance from KL gateway NOC and you should see an additional ~5ms added on top of what you're getting for Asian routes because of the additional distance to traverse between Ipoh-->KL.

How to properly QoS, any working guide?

I am consider to apply this Digi IF90.
My area only have Unifi, Maxis Fiber, Celcom Fibre. No TIME No TNB-Allo.

Different router may have different setup but here for TP Link :

1. Login to router.
2. Go to advance section, locate QoS setting.
3. Enable QoS, set you internet speed download upload.
4. Set your device according to your priority, which one you wanna give more speed and bandwidth.

For me with 100Mbps, every smartphone i set at 10% priority. Mi box s & laptop 30%

5. Save the setting and done.

digi doesn't give public ip. tried requesting but they are not providing

Yes confirm it is RM90 +6% tax.

Thanks for the info. This is the crucial piece I am looking for.

digi use their own infra or tm infra?

Depends on area. They rent from TM, Time and TNB.

Hi ... I'm interested to apply to Digi Broadband due to I'm given up waiting for Unifi or Maxis come back to me due to no port available for the past 10 months. Which I check with Digi and it's say my area "available" for subscription.

May I know does Digi need to tied to 12 or 24mths contract. As I read thw T&C if we used our own router modem no contract needed.

Correct me if I'm wrong interpreting wrong on the tied down contract.

Thanks in advance for the reply.

as usual 24mnths for landed fibre

Yes, it is confirmed they are using TM backbone... just subscribed and Digi advised me to drop by TM point for the transfer...