Got more mod bike pic here please share little boring.

Yes, you are damn right!!
So, ride slow and be super ultra extra alert on rainy days!!!


Hey uncle, don't buy at Nibong. That shop lacks professionalism and expensive. RM6600 is a bit expensive too, you can get a bit cheaper from Hong Leong Yamaha. You can do free service in Yamaha Service Center beside Jelutong high way. The Malay mechanics there are quite pro compared to Nibong folks.


Sure, lemme share this guide. It is a simple mod, 0 cost if you can DIY. Else, gotta pay about RM20 - RM30 for workmanship.

First, take off the plastic cover below your basket. There is an airbox with air filter mounted inside.
Remove the air filter and you can see 3 holes. One big big one at the center, attached to carburetor.
There are another 2 small holes on the left and right.
The left small hole is connected to the engine blower pipe, and the right hole is connected to the exhaust pipe.

Right hole function is to suck in air into exhaust pipe to the unburned fuel from exhaust stroke.
Left hole is like an engine 'breather'. If you open the bike throttle, you can feel some hot air going into the airbox. This hot air contains some petrol as well.
If you remove the hose connected to this hole, performance will increase slightly, because you have more cold air (cold air has more oxygen molecules) and no petrol moisture going into the carb. You got a cleaner air.

grabbed from kom135 :









the most nice mod I've ever seen!

Darn... i already paid deposit at nibong motor shop yesterday. My old bike already broke down and i have not much time to reseach for other shop liao...If i buy from nibong, can i still service my bike at Yamaha Service Center? Where is the best place i should go if i want to change my tyre?
Thanks for your advise.

The footrest really cannot pass JPJ ??? and the rear disc brake also cannot pass?

Is that the back light is CBR wan??....where can i gt the light..

im currently using HI PERF 4T SPECIAL 20W50..



btw ..
dont have time to go to service centre..
my only transport to go to work..

I think you can only let Nibong shop to service your bike. btw, full servicing in Hong Leong Yamaha is about RM30, quite worth.
If you wanna change tyre, go Bukit Mertajam. Nibong sell Dunlop TT900 80/90 @ RM95, and many shops in BM selling about RM75 only. Petrol and bridge tol add up oso less than RM10.


No wonder your engine vibrates. Your valve clearance got some problem ady, gotta readjust the valve and rejet your carburetor. How many km is on your odometer ady?

read at many forum LC SE got vibaration prob after a few thousands KM.
thats one of the reason i am rethink back of getting SE version...

got a question here, what's the difference between 'normal' TT9 and TT9 Low Profile / LP version?
here in my area, TT9 80/90 one can get around RM65 only, but dunno wat type.

errr bro, where got Special Edition / SE meh?
only Extreme Spirit or ES only la

I want to buy the cover for my cooler...i ask is about rm30 and an exhaust color ring is rm12.
Cheap or?
I also want to buy a orange color sticker for my rim.This cost how much?
If someone know the price please share it.
thanks

I buy my LC one month already..odometer is 49++ ....................

This post has been edited by mls_gamer: Nov 3 2008, 07:50 PM

Huh really ah? Die lah like that If i bring my bike to Hong Leong Yamaha for service leh? I dont mind paying RM30. I think got money they also want to earn right?
Wah go all the way to BM. Can I put 90/90 at rear tyre? Since ori rear tyre already 80/90, i want to make it bigger. Mind to tell me what size of front and rear tyre you using now?
Thanks bro

---

Added on November 3, 2008, 8:14 pmI will get my LC tomorrow, black and white one.

This post has been edited by UncleCheang: Nov 3 2008, 08:14 PM

born of new LC user.

yay post photooo

speakin bout oils the place where i buy my bike give me HiRev 2T oil 

and my new LC front  light blow ......so fast ... bike not even one month old yet...
any idea how much will that cost to replace a new one guys?
and today i went to change my helmet visor and i was asking about LC assesories and i asked the tauke if he had racing footrest..he paused, looked at me one kind and say no ...like i ask wrong question  
LOL


This post has been edited by Spayz: Nov 3 2008, 09:51 PM

I saw lot of yamaha legenda bike also tinggal satu mata saja..ego and nouvo also same.............

racing footrest cannot pass JPJ..............

Today lot of EX5 user trade their EX5 to LC when i mod my bike ...haha
i think more than 3.

hmmmm thats why laaa haha i think the tauke think im crazy
hey change seat also cannot pass JPJ ar? oh by the way is there assesories to add a rpm meter on lc?

hmm LC is getting more pop now....i think the price of LC gonna increse?

That's cheap, RM65 only!!
Low profile means the tyre side wall is shorter. For example, 90/90 punya side wall supposed to have 90% of 90mm tyre width (81mm). 80/90 will have 90% of 80mm tyre (72mm), and 90/80 --> low profile series, will have 80% of the 90mm tyre width (72mm). Low side wall decrease tyre rolling, so your grip is better. If you got a low profile at rear, the cornering is more stable. I've tried TT900 LP 90/80 at rear, very satisfied. I m forced to use 80/90 now bcoz tyre kena nail and can't go Bukit Mertajam for 90/80


Maybe it's my perception that they are not good. You can try servicing your bike 1st time, see if they check your valve clearance and carb settings. If not, you can always go Yamaha service center
yeah, u can put up to 100/80 at the rear, but front tyre can go up to 80/90 only.
I am using standard size, 70/80 F and 80/90R. Next round I am going to try low profile tyre --> 80/80 F and 90/80R. I've tried TT900 LP 90/80R last time, and it performs very very well. Near botak oso can corner faster than my stock V-rubber when new...

for now just 12K plus only..
the problem start since the first day..
shop told thats normal..then now its getting worse..

do u have full address shop @ Nibong..?

---

Added on November 4, 2008, 7:56 amthe normal price for radiator cover just around RM15 only.. last time i ask a shop at kulim..

This post has been edited by salimbest83: Nov 4 2008, 07:56 AM

haha...wrongly type, suppose ES...
Anyway, there are forumer posting the price list at previous page....

New LC user reporting

Side view




Front & Back View




Inside View


Front Tyre. I moved ori back tyre to front


Back Tyre. Then I replace the ori back tyre with this Dunlop TT900


Speedo Meter


This post has been edited by UncleCheang: Nov 4 2008, 04:34 PM