Outline ·
[ Standard ] ·
Linear+
Q6600 Overclock and Temperature
|
kmarc
|
 Apr 18 2008, 02:57 PM
|
The future is here - Cryptocurrencies!
|
QUOTE(ysh_kobe @ Apr 18 2008, 01:42 PM) Hi guys. Finally got my Red Scorpion last nite. Thx to ckhoong... Quickly fix it onto my mobo with S&S kits... And OC my Q6600 to 3.2ghz (400x8). The temp for idle is 40-42 while for load is 58-61.... Is this ok? Btw I 1 to ask. If i set the vcore too high, wat will happen? I'm d proud owner of GIGABYTE EP35C-DS3R....
Added on April 18, 2008, 1:43 pmI'm using tuniq tx2. And i found tat my temp had risen 2day. risen ab 2-3C during idlle. Why is this happening? Is it becos i din apply the thermalpaste properly? Full speed fan.
Added on April 18, 2008, 1:45 pmBtw, my vcore is set at 1.375 now at 3.2ghz.
Added on April 18, 2008, 2:01 pmHehehe... Sorry, I forgot that I din close my casing last nite.... I closed it just now. And stress using OCCT. the temperature shoots to 65 which is the temp i set for OCCT as max temp. Is this over too hot? I'm using Lian-LI PC007 with 2 stock 12cm fans and i add a 8cm fan at the top.... Can anybody teach me wat to do to reduce my temP? I'm not feeling so comfortable with it..... If too high vcore, worst case scenario, kaput lor......  For Q6600, recommended not to go higher than 1.5v for 24/7 usage..... of course, the lower, the better.... 65'c at 100% load is still ok, as the general recommendation is not more than 60-65'c. You can read my guide on "CPU core temperature" (in my sig). There's a section on how to reduce the CPU temperature too....  |
|
|
|
|
|
remysix
|
Apr 18 2008, 04:23 PM
|
|
|
QUOTE(kmarc @ Apr 18 2008, 02:57 PM) If too high vcore, worst case scenario, kaput lor...... For Q6600, recommended not to go higher than 1.5v for 24/7 usage..... of course, the lower, the better.... 65'c at 100% load is still ok, as the general recommendation is not more than 60-65'c. You can read my guide on "CPU core temperature" (in my sig). There's a section on how to reduce the CPU temperature too.... but that one is 3.2G at 65c la bro...imagine if he goes higher...will his q6600 stay below 65c  |
|
|
|
|
|
kmarc
|
Apr 18 2008, 06:17 PM
|
The future is here - Cryptocurrencies!
|
QUOTE(remysix @ Apr 18 2008, 04:23 PM) but that one is 3.2G at 65c la bro...imagine if he goes higher...will his q6600 stay below 65c It will be hotter lor....  Was replying based on the questions he asked in each paragraph......  |
|
|
|
|
|
ysh_kobe
|
Apr 18 2008, 06:23 PM
|
|
|
wats kaput?
|
|
|
|
|
|
kmarc
|
Apr 18 2008, 06:38 PM
|
The future is here - Cryptocurrencies!
|
QUOTE(ysh_kobe @ Apr 18 2008, 06:23 PM) Errr..... had to google that for you..... from the German word meaning out of order, not working, broken, utterly finished, destroyed, hopelessly outmoded (hmmm... good word for modders....  ) Next time google it yourself  This post has been edited by kmarc: Apr 18 2008, 06:39 PM |
|
|
|
|
|
ysh_kobe
|
Apr 18 2008, 07:51 PM
|
|
|
Haha. I tot its a local slang..... Thx.... Is my temp counted normal under xigmatek red scorpion and open casing?
Added on April 18, 2008, 7:52 pmanybody with the same setting?
Added on April 18, 2008, 7:52 pmBtw, 3.2ghz on air cooling is counted high onot?
Added on April 18, 2008, 7:56 pmI c your setting is almost d same as mine.... your stock vcore is? my stock vcore is quite high. 1.325v
Added on April 18, 2008, 8:00 pmQUOTE(kmarc @ Apr 18 2008, 07:38 PM) Errr..... had to google that for you..... from the German word meaning out of order, not working, broken, utterly finished, destroyed, hopelessly outmoded (hmmm... good word for modders.... ) Next time google it yourself Kmarc, I c you are a Sarawakian? I'm a S  arawakian too.. haha, jz living in Kota kinabalu now... This post has been edited by ysh_kobe: Apr 18 2008, 08:00 PM |
|
|
|
|
|
bryanyeo87
|
Apr 18 2008, 09:08 PM
|
|
|
@ysh_kobe
your temps normal la, nothing to worry about, oh yes, btw, what program or device used to read the temps and is it the individual cores or is it the die itself
Added on April 18, 2008, 9:14 pm@irenic
@ckffeng
975 is not better then 965
mainly because the 975 sold by manufacturers like asus, gigabyte, dfi and others are not built ground up for quads.
where as the bad axe 2 was designed and built by Intel engineers from the ground up for quad-core overclocking.
But yes, its an old board, so, maybe newer chipsets will replace these legacies of the past
This post has been edited by bryanyeo87: Apr 18 2008, 09:14 PM
|
|
|
|
|
|
kmarc
|
Apr 18 2008, 09:18 PM
|
The future is here - Cryptocurrencies!
|
QUOTE(ysh_kobe @ Apr 18 2008, 07:51 PM) Haha. I tot its a local slang..... Thx.... Is my temp counted normal under xigmatek red scorpion and open casing?
Added on April 18, 2008, 7:52 pmanybody with the same setting?
Added on April 18, 2008, 7:52 pmBtw, 3.2ghz on air cooling is counted high onot?
Added on April 18, 2008, 7:56 pmI c your setting is almost d same as mine.... your stock vcore is? my stock vcore is quite high. 1.325v
Added on April 18, 2008, 8:00 pmKmarc, I c you are a Sarawakian? I'm a S arawakian too.. haha, jz living in Kota kinabalu now... That temperature is ok. I'm getting the same temperature for my setup. However, I need to set 1.400v in BIOS to get to 3.2Ghz. Looks like your CPU is better. Yeah, my stock vcore is also 1.325v..... I've settled down in Kuching but am not a local here...... (provided the government don't throw me some where else...  ) |
|
|
|
|
|
ysh_kobe
|
Apr 18 2008, 11:53 PM
|
|
|
QUOTE(kmarc @ Apr 18 2008, 10:18 PM) That temperature is ok. I'm getting the same temperature for my setup. However, I need to set 1.400v in BIOS to get to 3.2Ghz. Looks like your CPU is better. Yeah, my stock vcore is also 1.325v..... I've settled down in Kuching but am not a local here...... (provided the government don't throw me some where else... ) What department are you in? Would it be tat high vcore=higher temperature? |
|
|
|
|
|
kmarc
|
Apr 19 2008, 12:00 AM
|
The future is here - Cryptocurrencies!
|
QUOTE(ysh_kobe @ Apr 18 2008, 11:53 PM) What department are you in? Would it be tat high vcore=higher temperature? Secret. Yup, the higher the vcore, the more heat is generated..... hence higher temperature.... |
|
|
|
|
|
ysh_kobe
|
Apr 19 2008, 12:05 AM
|
|
|
Haha. How do i know wat vcore should i use? I just simply add 0.05v
|
|
|
|
|
|
kmarc
|
Apr 19 2008, 12:07 AM
|
The future is here - Cryptocurrencies!
|
You need to know whether it is stable or not. You can use stress programs like prime95. Take a look at my CPU overclocking guide..... |
|
|
|
|
|
ysh_kobe
|
Apr 19 2008, 12:12 AM
|
|
|
Ic.......... Thanks alot kmarc. I learnt alot.... Thanks sifu...
|
|
|
|
|
|
wiNd
|
Apr 19 2008, 06:21 PM
|
|
|
Q6600 @ 3.6GHz (1.5v at bios) btw, anyone here using GA-P35-DS3L (Rev2.0) mobo? i set DDR2 Voltage to +0.4v, but when i check BIOS status, it stated 2.0v only?! HWmonitor also stated DDR2 Voltage at 2.0v only. im using Crucial RAMs which operates at 2.2v. This post has been edited by wiNd: Apr 19 2008, 09:47 PM |
|
|
|
|
|
bryanyeo87
|
Apr 21 2008, 02:35 PM
|
|
|
update bios perhaps? :S
|
|
|
|
|
|
wiNd
|
Apr 21 2008, 04:16 PM
|
|
|
QUOTE(bryanyeo87 @ Apr 21 2008, 02:35 PM) hmm, maybe later. btw, whats the highest vcore u all have tried? i tried 1.575v 65c....even with TRUE This post has been edited by wiNd: Apr 21 2008, 04:17 PM |
|
|
|
|
|
bryanyeo87
|
Apr 22 2008, 04:06 PM
|
|
|
go update ur bios la, coz iianm, bios F5 or F4 has issues with 2.2v vdimm :S
normal lor, i have tried zapping with 4.3ghz 1.6v using a custom WC kit lol
temps were nuked at 70c on prime D:
|
|
|
|
|
|
nelienuxe_sara
|
Apr 22 2008, 09:03 PM
|
|
|
i just received my q6600 g0 ^^
but after put inside my ip35e my mobo died
keep restarting
only manage to get into windows 1 time only
i replace with my old but quite new e2160 oso same thin happen so i suspect my mobo died... 2mrw wanna go to imbi plaza
WTF la haha
anybody from wangsa melawati here?
i wanna try my proc so it work
only have 1week personal warranty since it oem
i will come to ur place just to try help me pls ^^
|
|
|
|
|
|
wiNd
|
Apr 22 2008, 10:40 PM
|
|
|
using bios version F7 QUOTE(bryanyeo87 @ Apr 22 2008, 04:06 PM) go update ur bios la, coz iianm, bios F5 or F4 has issues with 2.2v vdimm :S normal lor, i have tried zapping with 4.3ghz 1.6v using a custom WC kit lol temps were nuked at 70c on prime D: |
|
|
|
|
|
bryanyeo87
|
Apr 23 2008, 08:56 AM
|
|
|
QUOTE(wiNd @ Apr 22 2008, 10:40 PM) yeh go update it, coz the fix was in bios F9 and with a heavy heart, i have to say sayonara with the sale of my q6600, T_T there will be non that can replace its oc capabilities T____T |
|
|
|
|
Quote
0.0287sec
1.10
6 queries
GZIP Disabled