Outline ·
[ Standard ] ·
Linear+
Q6600 Overclock and Temperature
|
ysh_kobe
|
  Apr 18 2008, 01:42 PM
|
|
Hi guys. Finally got my Red Scorpion last nite. Thx to ckhoong... Quickly fix it onto my mobo with S&S kits... And OC my Q6600 to 3.2ghz (400x8). The temp for idle is 40-42 while for load is 58-61.... Is this ok? Btw I 1 to ask. If i set the vcore too high, wat will happen? I'm d proud owner of GIGABYTE EP35C-DS3R....
Added on April 18, 2008, 1:43 pmI'm using tuniq tx2. And i found tat my temp had risen 2day. risen ab 2-3C during idlle. Why is this happening? Is it becos i din apply the thermalpaste properly? Full speed fan.
Added on April 18, 2008, 1:45 pmBtw, my vcore is set at 1.375 now at 3.2ghz.
Added on April 18, 2008, 2:01 pmHehehe... Sorry, I forgot that I din close my casing last nite.... I closed it just now. And stress using OCCT. the temperature shoots to 65 which is the temp i set for OCCT as max temp. Is this over too hot? I'm using Lian-LI PC007 with 2 stock 12cm fans and i add a 8cm fan at the top.... Can anybody teach me wat to do to reduce my temP? I'm not feeling so comfortable with it.....
This post has been edited by ysh_kobe: Apr 18 2008, 02:01 PM
|
|
|
|
|
|
ysh_kobe
|
Apr 18 2008, 06:23 PM
|
|
|
wats kaput?
|
|
|
|
|
|
ysh_kobe
|
Apr 18 2008, 07:51 PM
|
|
|
Haha. I tot its a local slang..... Thx.... Is my temp counted normal under xigmatek red scorpion and open casing?
Added on April 18, 2008, 7:52 pmanybody with the same setting?
Added on April 18, 2008, 7:52 pmBtw, 3.2ghz on air cooling is counted high onot?
Added on April 18, 2008, 7:56 pmI c your setting is almost d same as mine.... your stock vcore is? my stock vcore is quite high. 1.325v
Added on April 18, 2008, 8:00 pmQUOTE(kmarc @ Apr 18 2008, 07:38 PM) Errr..... had to google that for you..... from the German word meaning out of order, not working, broken, utterly finished, destroyed, hopelessly outmoded (hmmm... good word for modders....  ) Next time google it yourself  Kmarc, I c you are a Sarawakian? I'm a S  arawakian too.. haha, jz living in Kota kinabalu now... This post has been edited by ysh_kobe: Apr 18 2008, 08:00 PM |
|
|
|
|
|
ysh_kobe
|
Apr 18 2008, 11:53 PM
|
|
|
QUOTE(kmarc @ Apr 18 2008, 10:18 PM) That temperature is ok. I'm getting the same temperature for my setup. However, I need to set 1.400v in BIOS to get to 3.2Ghz. Looks like your CPU is better. Yeah, my stock vcore is also 1.325v.....  I've settled down in Kuching but am not a local here......  (provided the government don't throw me some where else...  ) What department are you in? Would it be tat high vcore=higher temperature? |
|
|
|
|
|
ysh_kobe
|
Apr 19 2008, 12:05 AM
|
|
|
Haha. How do i know wat vcore should i use? I just simply add 0.05v
|
|
|
|
|
|
ysh_kobe
|
Apr 19 2008, 12:12 AM
|
|
|
Ic.......... Thanks alot kmarc. I learnt alot.... Thanks sifu...
|
|
|
|
|
|
ysh_kobe
|
May 17 2008, 11:35 AM
|
|
|
Bro kmarc, got a question here. I've been running stable at 3.2ghz (400x8) on my Q6600. However sometimes, when starting the pc, it jumps back to stock clock, why did this happen??
|
|
|
|
|
|
ysh_kobe
|
May 17 2008, 12:39 PM
|
|
|
yup. Is that the reason? Thanks.
Added on May 17, 2008, 12:40 pmI stress using everest ultimate for 3 hours plus. Stable. and i even played games for 8 continuous hours.
Added on May 17, 2008, 1:28 pmMy everest ultimate shows my L2 cache as 4mb only. is this the software bug?
This post has been edited by ysh_kobe: May 17 2008, 01:28 PM
|
|
|
|
|
Quote
0.0336sec
0.50
7 queries
GZIP Disabled