whats the timing when u ran the 3.8ghz setting??

3.8ghz daily would result VERY HOT room temp

i need 1.45v for 3.6 and 1.55v for 3.8ghz, both LinX stable

clock this with my tpower and using kst to play with...cooled by sunbeam ccf

BSOD say hallo to me even i try 3.06Ghz at vcore1.35. Guess i play too much... hardware failure @@"

mayb u shud try to pump a little of v nb...it works for me..

does anyone here mod their q6600?

nice temp !

what kind of mod ?

i tried 850-900mhz at 5-5-5-15 at 2.0V >.<" cant get it stable .
guess its me or my RAM sucks .

i really wanted to try 3.8ghz stable daily usage
temperature is not much problem for me .
cause im pretty sure my setup is very efficient in terms of temperature control .
ambient temp perhaps 30-33C
nothing else generate great heats inside d casing .
2x 92mm fans sucking out hot air from proc and NB area .
2x 120mm pushing in 60CFM each at front part .
rad located bottom as normal for TJ07 setup .

i gotta learn more on ram tweaking >.<"

This post has been edited by monsh: May 11 2009, 04:37 AM

bsel mod? dun reli need it, since my mobo can oc de

just wanna ask izzit i'm able to OC higher and more stable if i upgrade my PSU to CM 850w Modular compare to my current Silverstone Strider 500w?? dun laugh ay noob question here.......hehehe.....coz when i OC to 3.6ghz, it's not stable and famous "blue" screen comes out.......ahahahaa!!

---

Added on May 12, 2009, 1:18 pmand it's not sufficient when running 3.4ghz and OC'ed HD4890 as well......... any help will be appreciated. TQ!

This post has been edited by valtai30: May 12 2009, 01:18 PM

i guess ur psu not enuf juice lo..so many hardwares u got

i guess so.....that's why bought a CM 850w modular and now waiting me to install..... hopefully it'll improve the performance lor....

not really.... unless u need insane voltages to go 3.6ghz... 500w continuous is more than enough for your 4890 and q6600 at stock voltage... u might need 100~130w if ure using 1.45v on ur processor blue screens occur not bcos of insufficient power, but rather instability in the system... if not enuf power = auto restart

how about when i play Lost Planet Extreme Cndition, it hanged and not responding?? and for left 4 dead, when comes to "kelam kabut" figth with damn lots of zombies, it automatically close the game and back to desktop?? i thought it's b'coz of insufficient power supply for either GC or CPU?? any advise?? and FYI, i always play games with 3.4ghz and overclocked HD4890.

hanged and not responding, were you able to ctrl+alt+del? if yes, then its obvious the game got problem, otherwise your hardware could be unstable... if no bluescreen, my guess its the ram that's disturbing... regarding l4d, many ppl have the same problem, if they're using pirated copy ... and did u overvolt ur 4890? if not, then power consumption remains the same

yes, i can ctrl+alt+del. but after i downclocked to 3.2Ghz @ 1.375v and set my GC to default clock, the game won't hang anymore. as for L4D, as u said got a lot ppl having same problem, and yes i'm using xxxx copy as well......hehehe.....(dun wanna play that game anymore).

Graphic card overheat? Now my pc always hang when play The Last Remnant due to graphic card overheat. 82'c wow

No idea how to slove lol... don wan waste money buy gc cooler.

with the current hot climate, i revert my OC to stock + on C1E & EIST function. cannot stand d heat... now really a bad time to OC if room got no aircond. haizzz...

l4d has multicore problem, set it to single core, den its ok ad..

i dun think my GC overheated lor, coz the temperature is around 60'c - 65'c while playing games. izzit related to PSU insufficiency???

---

Added on May 13, 2009, 8:47 amu mean set the Q6600 to single core and play that game ar?? no need lar, coz i already uninstalled it.....

This post has been edited by valtai30: May 13 2009, 08:47 AM