Got the following price for a long/straight shape kitchen cabinet:

1) Dry Kitchen - RM20k
- Top: 12ft (cover up to ceiling)
- Bottom: 17ft
- 4G glass door
- Melamie case
- Quartz top

2) Tall Cabinet (with fridge opening) - RM6k
- Length: 7ft
- Height: 9ft
- Glass + melamine door
- Melamine case

May I know if the above prices are reasonable based on the current mrket rate?

Thanks

I'm working at kc factory and i think 20k you can get solid aluminium + quarzstone tabletop for same specs.
For tall cabinet you could also get aluminium but 3g glass design.

just curious, for those quotes we get from those KC companies like Unity, Intech, etc., roughly how much % discount can still nego?

total package estimated budget is around 50k, just to make sure I don't offer them too low else later kena kick out

thanks

This post has been edited by lowyat101: Dec 23 2022, 10:36 PM

wah 50k... must be quite huge size.

Question here. Porcelain or quartz kitchen top is better? Thanks!

haha it's just a small 20x70 house, but the prices quoted are so expensive nowadays. 50k for dry kitchen + wardrobes + bookshelves + display cabinet

might be going with only the KC and wardrobes/bookshelves maybe will buy from Ikea, can save a few k here

ah..i see.. ok no wonder... not just KC, but wardrobe cabinets etc..

if need solid wood furniture, table, bed , sideboard etc can pm..

Hope you mind. I have a stupid question here.

With a 20x70 double storey may I ask how do people end up with a rm150k to 200k renovation ah?

thanks in advance.

some ideas for some standard items

- wet kitchen extension: 50k
- kitchen cabinets + wardrobes: 50k
- car porch + autogate: 20k
- airconds: 10k
- grills + awning: 10k
- electrical + plumbing + other hacking etc.: unlimited depending on what you want
- furniture + appliances

may I know is it only alu door + melamine carcasses? as i think fully alu will be quite expensive

5-10years ago, i have no clue, i did pay 6 figures also for such renovation to contractor. all i know is wetwork and brickwork cost alot.

anyway after venturing into woodworking industry and knowing some of these subcon "customers" who i do some cabinetry for....so after a few years being around the building industry , i realize actually their raw material costs is quite cheap... i guess the skill comes in managing 2-3 workers at site daily to build the 30k back extension to spec etc..

50k for so many things? what kind of material using? melamine board?

I was quoted only for wet & dry kitchen cabinet, wardrobes ady cost 100k++ ady..But was told all is solid plywood. But the final quotation (included other place) for all wood cabinet is killing me.

sure it's just for basic melamine

btw plywood is not solid wood ya

plywood is good but "all wood cabinet" i dont think its all wood. its all plywood frame u mean.
dont see why plywood should cost so much more what spec plywood? one piece is rm100 or there is also rm200 type.. need to check plywood spec.

all wood cabinet i mean is all solid plywood which stated in quotation. I didn't know plywood also gt different type. Whats difference between rm100 and rm200 type

of coz plywood got many type. from low class packing goods type to marine ply to birch ply
maybe you can ask your kitchen guy.. since he gonna untung from u.

We don't use woods. Body and carcasses we usually use semi-fix which is combination of aluminium and ACP (for side and back panel). Yeah fully aluminium is expensive We will give out fully aluminium price only on request.
Therefore I suggested for customers to ask the salesperson to confirm if it's fully aluminium / semi-fix / ACP.

Good day,

Need your advise. Based on the below sample picture design and the design model both side kitchen cabinet was quoted around RM50k+. Quite shock to see the quotation price just for the kitchen cabinet (not included the cooker hob and hood, kitchen faucet and sink, etc.). Kindly advise which good kitchen cabinet contractor. Contractor/Vendor can PM me. Cyberjaya location. Thanks.

It was Unity Kitchen quoted RM50k+

just survey dulu bos.. many options out there.. unity price yes memang mahal.. i also kene hahaha